BW Technologies IntelliDoX Manuale utente
User Manual
IntelliDoX
INTELLIDOX DOCKING MODULE USER MANUAL || ABOUT THIS PUBLICATION
BW TECHNOLOGIES BY HONEYWELL PAGE 1 OF 103
Table of Contents
About this Publication ................................................................................................................................... 3
Important Safety Information: Read First .................................................................................................... 4
Getting Started ............................................................................................................................................... 5
About the IntelliDoX Docking Module ................................................................................................ 6
What’s in the Box ............................................................................................................................... 7
IntelliDoX at a Glance ........................................................................................................................ 8
Inlet Keys ........................................................................................................................................... 9
LCD Screen ..................................................................................................................................... 11
Keypad ............................................................................................................................................. 12
Assemble Modules ....................................................................................................................................... 13
Work Plan: Assemble Individual Modules ........................................................................................ 14
Work Plan: Assemble Gangs of up to Five Connected Modules ...................................................... 15
Assemble the Stand ......................................................................................................................... 16
Connect Modules ............................................................................................................................. 17
Mount on a Wall ............................................................................................................................... 18
Mount on Parallel DIN Rails ............................................................................................................. 22
Prepare Modules for Use ............................................................................................................................. 25
Attach the End Plate ........................................................................................................................ 26
Connect the Exhaust Tubing ............................................................................................................ 27
Connect the Inlet filter ...................................................................................................................... 28
Insert the Inlet Plugs ........................................................................................................................ 29
Connect the Power .......................................................................................................................... 30
Connect the Module to a Network .................................................................................................... 31
Connect a Calibration Gas Cylinder ................................................................................................. 35
Dock Station Settings Menu ........................................................................................................................ 37
Display the Adjust Dock Station Settings Menu ............................................................................... 38
Adjust the LCD Brightness ............................................................................................................... 39
Adjust Date and Time Settings ........................................................................................................ 40
Configure Gas Inlets ........................................................................................................................ 41
Display the Select Language Menu ................................................................................................. 43
Display the About Summary Screen ................................................................................................ 44
Detector Operations ..................................................................................................................................... 45
Insert a Detector .............................................................................................................................. 46
Detector Operations Menu ............................................................................................................... 47
Bump Test ....................................................................................................................................... 48
FastBump ........................................................................................................................................ 50
Calibration ........................................................................................................................................ 52
Transfer Datalogs from a Detector ................................................................................................... 55
Display the Adjust Dock Station Settings Menu ............................................................................... 56
Charge a Detector ........................................................................................................................... 57
Configure Settings via Fleet Manager II Software ..................................................................................... 58
Protect Module Operations with a Passcode ................................................................................... 59
Configure Module and Detector Settings ......................................................................................... 60
Adjust Time and Date Settings via Fleet Manager II Software ......................................................... 63
Hibernation ................................................................................................................................................... 66
Configure Hibernation ...................................................................................................................... 67
Transfer Data Files ....................................................................................................................................... 71
Transfer Data Files from the Module ............................................................................................... 72
INTELLIDOX DOCKING MODULE USER MANUAL || ABOUT THIS PUBLICATION
BW TECHNOLOGIES BY HONEYWELL PAGE 2 OF 103
Update Firmware .......................................................................................................................................... 74
Update Module Firmware ................................................................................................................. 75
Update Detector Firmware ............................................................................................................... 77
Replace Detector Cradle and Calibration Insert ........................................................................................ 79
Replace the Detector Cradle ............................................................................................................ 80
Replace the Calibration Insert .......................................................................................................... 82
Maintenance ................................................................................................................................................. 84
Clean and Maintain the Module ....................................................................................................... 85
Calibration Equipment and Gases ................................................................................................... 86
Technical Specification and Warranty ....................................................................................................... 87
Technical Specification .................................................................................................................... 88
Limited Warranty and Limitation Liability .......................................................................................... 90
Troubleshooting ........................................................................................................................................... 91
Compliance Tests ............................................................................................................................ 92
Detectors ......................................................................................................................................... 94
Modules ........................................................................................................................................... 95
Network Connections ....................................................................................................................... 98
Calibration of PID Sensor ................................................................................................................ 99
Glossary ...................................................................................................................................................... 100
Contact BW Technologies ......................................................................................................................... 103
INTELLIDOX DOCKING MODULE USER MANUAL || ABOUT THIS PUBLICATION
BW TECHNOLOGIES BY HONEYWELL PAGE 3 OF 103
About this Publication
IntelliDoX Docking ModuleOperator Manual
50104991-168 || OM-EN-FMSU-C1
© 2015 BW Technologies by Honeywell. All rights reserved.
The IntelliDoX Docking Module is designed to support multiple detectors manufactured by
BW Technologies. As a result, certain procedures, features and options described in this
manual may not be supported by all of the compatible detector models. To understand
which procedures, features and options are supported, refer to the appropriate detector
operator manual.
Ensure that you are familiar with the use of personal gas detection devices and
accessories, and take appropriate action in the event of an alarm condition.
While this information is presented in good faith and believed to be accurate,
BW Technologies disclaims the implied warranties of merchantability and fitness for a
particular purpose and makes no express warranties except as may be stated in its written
agreement with and for its customers. In no event is BW Technologies liable to anyone for
any indirect, special or consequential damages. The information and specifications in this
document are subject to change without notice.
Trademarks
Brand or product names are trademarks of their respective owners. The following brand or
product names are trademarks of BW Technologies and/or Honeywell:
Fleet Manager II
IntelliDoX
Signal Words
This manual uses the following signal words, as defined by ANSI Z535.4-1998:
Hazardous situation which, if not avoided, will result in death or serious injury. This
symbol identifies the most extreme hazardous situations.
Hazardous situation which, if not avoided, could result in death or serious injury.
Hazardous situation which, if not avoided, may result in moderate or minor injury.
Situations which, if not avoided, may result in property damage.
INTELLIDOX DOCKING MODULE USER MANUAL || IMPORTANT SAFETY INFORMATION: READ FIRST
BW TECHNOLOGIES BY HONEYWELL PAGE 4 OF 103
Important Safety Information: Read First
To ensure personal safety, read all Safety
Information and Warnings before using this
equipment.
Use this equipment only as specified by the
manufacturer. Failure to do so may impair
protection provided by the equipment.
The safety and security of any system or network
incorporating this equipment and its accessory
components is the responsibility of the assembler
of the system.
Follow all required National Electric Codes (NEC)
and safety standards.
This IntelliDoX module is intended for use as a
stand-alone docking module, or as a component
in a connected gang of up to five IntelliDoX
modules.
If the equipment is damaged or parts are missing,
contact BW Technologies immediately.
Substitution of components may impair the safety
of the equipment.
Do not attempt to disassemble, adjust, or service
the equipment unless instructions are provided to
perform a procedure, or a component is listed as
a user-replaceable component in the user
manual. Use only BW Technologies replacement
components.
To eliminate the risk of electrical shock,
disconnect the equipment when cleaning or
performing maintenance.
This equipment uses potentially harmful gas for
calibrations. The equipment must be attached to
a venting system or be used in a well-ventilated
area.
To prevent gas leaks, the end plate must be
attached and locked with the latch arm lock
before connecting power supply and/or
connecting gas cylinders. The end plate must
remain securely latched at all times during
operation.
Perform calibrations and bump tests only in a
normal atmosphere (20.9% v/v O
2
) that is free of
hazardous gas.
The maximum recommended calibration tubing
length is 10 meters (33 feet). Use of tubing that is
longer than the recommended length may result
in inaccurate or failed compliance tests or
calibrations.
The maximum recommended exhaust tubing
length is 15 meters (49.5 feet).
Ensure that the inlet filter is clean.
The use of calibration gas cylinders other than
those specified by BW Technologies may result
in unsafe calibration or possible non-recoverable
failure of the equipment, and will invalidate the
warranty.
Do not use calibration gas cylinders past their
expiration date.
Ensure that all calibration gas cylinders are in
good condition.
Ensure that all calibration gas cylinders contain
enough gas.
Ensure the exhaust line is not connected to a
negative pressure system.
A demand flow regulator must be used with all
calibration gas cylinder connections. The module
inlet should not be pressurized.
Failed tests can result if inlets are not set up
correctly.
Do not expose the equipment to electrical shock
or severe and/or continuous mechanical shock.
Do not immerse the equipment in liquids.
Products may contain materials that are
regulated for transportation under domestic and
international dangerous goods regulations.
Return product in compliance with appropriate
dangerous goods regulations. Contact freight
carrier for further instructions.
To prevent the corruption or loss of data and/or
software and/or firmware, do not deactivate the
equipment while performing datalog transfers,
bump tests, calibrations or other operations.
INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 5 OF 103
Getting Started
This section contains information and illustrations related to the module and its components. It also includes an
overview of the module settings menu and general instructions for inserting a detector and using the detector
operations menu on the module.
Contents
About the IntelliDoX Docking Module .......................................................................................................... 6
Normal Operating Conditions ............................................................................................................. 6
Parts and Accessories ....................................................................................................................... 6
Warranty Registration ........................................................................................................................ 6
What’s in the Box ........................................................................................................................................... 7
IntelliDoX Docking Module ................................................................................................................. 7
IntelliDoX Enabler Kit ......................................................................................................................... 7
Fleet Manager II Software .................................................................................................................. 7
IntelliDoX at a Glance .................................................................................................................................... 8
Inlet Keys ........................................................................................................................................................ 9
Single-inlet Key ................................................................................................................................ 10
Multi-inlet Key .................................................................................................................................. 10
LCD Screen ................................................................................................................................................... 11
Screen Color .................................................................................................................................... 11
Keypad .......................................................................................................................................................... 12
Keypad Buttons ............................................................................................................................... 12
INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 6 OF 103
About the IntelliDoX Docking Module
The IntelliDoX Docking Module (‘the module’) is an automatic test and calibration station
for use with portable gas detectors manufactured by BW Technologies. The module
automatically performs essential procedures including sensor identification, bump tests,
calibrations, alarm tests and data transfers. It also retains a cumulative record of detector
datalogs and event logs that are transferred to and stored in onboard memory.
Modules may be used as individual, stand-alone docking stations. They may also be
connected to form gangs of up to 5 modules that function independently. Connected
modules share power, network and gas connections.
Modules may be connected to a network via an Ethernet cable for enhanced access to
and control of administrative and maintenance tasks. Modules are compatible with Fleet
Manager II software, version 4.0 or higher.
Normal Operating Conditions
The module is designed to be safe in the following conditions:
1. Indoor use only;
2. Normal atmosphere (20.9% v/v O2) that is free of hazardous gas;
3. Temperature range of +50F to +95F (+10C to +35C) ; and
4. Relative humidity of 10% to 90% non-condensing.
If the intended operating environment does not match these criteria, BW Technologies
recommends that you consult a qualified professional specialist prior to installing and
using any modules.
This equipment uses potentially harmful gas for calibrations. The module must be
attached to a venting system or be used in a well-ventilated area.
Parts and Accessories
Replaceable parts are sold separately. To receive a complete list of replaceable parts
approved for use with this product, contact BW Technologies or an authorized distributor,
or visit the product website at www.honeywellanalytics.com
Gas detectors, calibration and purge gas cylinders, and other accessories are sold
separately. To receive a complete list of calibration gases and accessories approved for
use with this product, contact BW Technologies or an authorized distributor, or visit the
product website at www.honeywellanalytics.com.
Warranty Registration
www.honeywellanalytics.com/support/product-registration
INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 7 OF 103
What’s in the Box
IntelliDoX Docking Module
Each IntelliDoX Docking Module package contains:
1. One module with a factory-installed nest for a compatible portable gas detector, a
single-inlet key, and an attached end plate;
NOTE: If the end plate is not attached to the IntelliDoX docking module or is
missing, contact BW Technologies or an authorized distributor immediately.
2. One printed Quick Reference Guide;
3. One CD containing the module Operator Manual and Quick Reference Guide in PDF
format; and
4. One CD containing Fleet Manager II software, v4.0 or higher.
The power supply and power cord, Ethernet cable, tubing, inlet filters and plugs, quick
connect fittings, and miscellaneous other fittings are packaged separately as the
IntelliDoX Enabler Kit. One Enabler Kit is required for each individual module or gang of
up to 5 connected modules.
If the module is damaged or if parts are missing, contact BW Technologies or an
authorized distributor immediately.
IntelliDoX Enabler Kit
You need one IntelliDoX Enabler Kit for each stand-alone IntelliDoX module or gang of up
to 5 connected modules. Each Enabler Kit contains:
1. One power supply and AC power cord appropriate to shipping destination;
2. One ethernet cable;
3. Gas tubing, 1/8 inch I.D., 4.6 meters (15 feet);
4. Quick connect fittings;
5. Inlet filters and plugs;
6. Connectors with attached 3/16 inch I.D. tubing for use with demand flow regulators;
7. Miscellaneous connectors;
8. One CD containing the IntelliDoX operator manual and the quick reference guide in
PDF format; and
9. One CD containing Fleet Manager II software, v4.0 or higher.
If Enabler Kit parts are damaged or missing, or if additional Enabler Kits are required,
contact BW Technologies or an authorized distributor immediately.
Fleet Manager II Software
Fleet Manager II is proprietary instrument management software developed by
BW Technologies. You can use Fleet Manager II to:
Configure and manage compatible docking modules and detectors;
Update firmware for compatible docking modules and detectors;
Configure and manage compliance tests;
Import, manage and analyze datalogs, event logs and compliance test results; and
Automate certain procedures and processes for compatible docking modules and
detectors.
To learn more about instrument management via Fleet Manager II software, refer to the
Fleet Manager II Operator Manual or visit the product website at
www.honeywellanalytics.com.
INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 8 OF 103
IntelliDoX at a Glance
INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 9 OF 103
Inlet Keys
By default, IntelliDoX is configured to connect one calibration gas cylinder to gas inlet 1.
In this configuration, gas inlets 2, 3, and 4 are inactive. To connect more than one
calibration gas cylinder to IntelliDoX, you must insert a multi-inlet key to activate gas
inlets 1, 2, 3, and 4.
Single-inlet Key
Insert the single-inlet key when only one gas inlet is required to support compliance test
operations performed on the module.
When the single-inlet key is inserted into a module, gas inlet 1 is active and gas inlets 2, 3
and 4 are inactive.
Gas Cylinder with a Single-Inlet Key
When you connect a gas cylinder to IntelliDoX with a single-inlet key, you will see one
connected gas type on the LCD screen:
Single-inlet key: IntelliDoX
activates gas inlet 1 and
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
