CalDigit Element Hub Manuale utente
For more information visit www.CalDigit.com
USER GUIDE
Table of Contents
1. General Information .......................................................
Introduction
General Use Warnings
Safety Warnings
System Requirements
In the Box
2. Feature Compatibility .....................................................
Laptop Compatibility
Monitor Compatibility
3. Using the Element Hub .......................................
Reversible Design (Optional)
Placing the Rubber Feet Strips on the
Element Hub (Optional)
Powering the Element Hub
Connecting the Element Hub to your computer
4. Interface Summary ..........................................................
Thunderbolt 4 (Host Connection)
Thunderbolt 4 (Downstream Ports)
USB-A (10Gb/s)
Laptop Charging
5. Specications ....................................................................
6. Optional Accessories(available on CalDigit online store) ...........
7. Technical Support & Warranty Information ............
3
3
4
4
5
5
6
6
8
9
9
10
11
11
12
13
13
13
14
15
16
17
3
The CalDigit Thunderbolt 4 Element Hub is the rst of its kind, oering 4x
the performance of traditional USB-C hubs, whilst harnessing the power of
Thunderbolt 4 in order to create a device without compromises.
Every Element Hub workow will be dierent from the next, bringing with it the
potential for incredibly unique set-ups, only limited by your imagination.
Connect what you need, when you need.
1. General Information
Introduction
4
Please read the Element Hub manual thoroughly and familiarize yourself
with the product before use.
Avoid using the Element Hub in extremely hot and cold environments. A
safe temperature range is between 50° to 95° F (10° to 35° C).
Avoid using the Element Hub in humid environments. Moisture and
condensation can accumulate in the device and cause damage to the
electrical components.
Only use the power adapter that has been supplied with the Element Hub.
An excessive or inadequate power supply can result in unstable performance
or device failure.
•
•
•
•
Keep the Element Hub away from liquids and moisture. Exposure to liquids
can result in damaging the unit, electric shock, and result in a re hazard.
If your Element Hub gets wet while it is still o, do not turn it on. In the case
of any issue with the device, do not attempt to repair or open the device
yourself. Doing so can result in personal injury, damage the device, and will
void the warranty.
If you have any issues, please contact CalDigit Technical Support.
•
•
General Use Warnings
Safety Warnings
5
1 x Thunderbolt 4 Element Hub
1 x Thunderbolt 4 Cable 0.8m (Passive)
2 x Rubber Feet Strips
1 x Power Supply (150W)
1 x Power Cord
A
B
C
D
E
macOS 11 or above
Windows 10 or above
Thunderbolt 4 Computer
Thunderbolt 3 Computer
USB-C ChromeBook
System Requirements
In the Box
A
C
D
B
E
USB-C (USB 4) Computer
USB-C (USB 3.1) Computer
iPad Pro
iPad Air (4th Gen)
Windows Tablet
6
The Element Hub is a Thunderbolt 4 device. This means that it is compatible
with all Type-C laptops and tablets by adapting to the performance available
from your Type-C port.
The Element Hub is compatible with Thunderbolt 4, Thunderbolt 3, USB4
(Type-C), and USB-C 10Gb/s and 5Gb/s host devices.
2. Feature Compatibility
Computer Performance Element Hub Compatible
Thunderbolt 1* 10Gb/s ✓
Thunderbolt 2* 20Gb/s ✓
Thunderbolt 3*** 40Gb/s ✓
Thunderbolt 4 40Gb/s ✓
USB-C** 5Gb/s or 10Gb/s ✓
USB4 40Gb/s ✓
Legacy USB-A 3.0 or 2.0**** 5Gb/s or 480Mb/s ✓
Laptop
Compatibility
7
With use of the Apple Thunderbolt 3 to 2 Adapter. User will see a performance decrease.
USB-C userswill see a performance decrease.
Some Windows PC manufacturers have decided to restrict functionality on their Thunderbolt 3
ports such as charging and moniotr compatibility.
USB-A to USB-C cable is required (sold separately). Laptop charging and external monitor are not
supported when connecting Element to USB-A host.
Some early Thunderbolt 3 computers (based on Intel Alpine Ridge) can only use two
Thunderbolt ports on Element Hub. The rest two Thunderbolt ports will work as USB-C ports.
This means Element’s Thunderbolt ports will be limited. In this case, Both [Computer] port and
the Thunderbolt 4 port next to DC port are operating as Thunderbolt ports. To identify if your
Thunderbolt 3 PC is based on Intel Alpine Ridge, go to “Device Manager”, Select “System Devices”,
and scroll down to “Thunderbolt(TM) Controller – XXXX”, where XXXX is the Controller ID. If you
see the Controller ID is 1575, 1577, 15BF, 15D2, or 15D9, that means you are using Alpine Ridge
based Windows PC and Element’s Thunderbolt ports are limited.
*
**
***
****
*****
8
NOTE
Some Windows PC manufacturers have decided to restrict functionality on their
Thunderbolt 3 and USB-C ports, such as charging and monitor compatibility. Check to
see if your PC supports a monitor.
TBT4, TBT3 & USB4 PC Intel TBT3 Macs Apple M1 Macs USB-C 10Gb/s PC
(DP 1.4)
USB-C 5Gb/s PC
(DP 1.2)
4K 30Hz ✓ ✓ ✓ ✓ ✓
4K 60Hz ✓ ✓ ✓ ✓
5K 60Hz Thunderbolt
Display ✓ ✓ ✓
6K 60Hz Apple Pro
Display XDR ✓ ✓ ✓
8K 30Hz ✓
Daul 4K 60Hz ✓ ✓
iPad Pro iPad Air (4th Gen) ChromeBook Windows Tablet
4K 30Hz ✓ ✓ ✓ ✓
4K 60Hz ✓
5K 60Hz Thunderbolt
Display
6K 60Hz Apple Pro
Display XDR
8K 30Hz
Daul 4K 60Hz
Monitor
Compatibility
You can connect up to two external monitors to the Element Hub via the
spare Thunderbolt 4 ports, as long as your laptop will support two monitors.
This can either be achieved by directly connecting a Thunderbolt 3 or USB-C
monitor to the spare Thunderbolt 4 ports on the Element Hub.
Alternatively if you want to connect a HDMI or DisplayPort monitor you can
use a USB-C to HDMI or USB-C to DisplayPort Adapter (Sold separately).
Apple M1 based laptops only support one external display.
9
Reversible Design (Optional)
The Element Hub has been designed in order to be easily congured on either
side of a laptop with the spare Thunderbolt 4 ports and power cable facing
away from the laptop in order to provide optimum cable management.
Choose which side of your laptop you would like to place the Element Hub,
and ip over the the Element Hub if required so that the Thunderbolt 4
ports, and power supply cable will be facing away from you.
3. Using the Element Hub
10
Placing the Rubber Feet Strips on
the Element Hub (Optional)
Use the supplied Rubber Feet Strips in order to prevent the Element Hub
from scratching your desk.
Choose which side of your laptop you would like to place the Element
Hub.
Flip over the Element Hub.
Align the two Rubber Feet Strips so that they t into the slots on either
side of the Element Hub.
Place the Element Hub on your desk with the Rubber Feet Strips facing
downwards.
1.
2.
3.
4.
Line-up
Press
Indice
Altri manuali CalDigit Interruttore
