CALEFFI 501 Series Manuale utente

SAFETY INSTRUCTION

This safety alert symbol will be used in this manual to draw attention to safety related

instructions. When used, the safety alert symbol means

CAUTION: All work must be performed by personnel trained in the

proper application, installation, and maintenance of systems in accordance

with all applicable codes and ordinances.

CAUTION: Over-tightening and breakage can occur with the use of T ®

pipe joint compounds. T ®provides lubricity so that care must be

exercised not to over-tighten joints. Failure to follow these instructions

could result in property damage and /or personal injury.

Technical Characteristics

Description

Automatic Air Vent

38454.02

501 Series

www.cal .com

pipes where large quantities of air is required to be released from the

system.

This item is designed for use in closed hydronic systems. Do not use in

plumbing applications. This item does not meet the low-lead plumbing

standards of U.S. and Canada.

Connection: Inlet 3/4” NPT female

Exhaust 3/8” straight female

Maximum working pressure: 230 psig (16 bar)

Maximum venting pressure: 90 psig (6 bar)

Maximum venting rate: 8 scfm (225 Nl/min)

Working temperature range: -4 to 250˚F (-20 to 120˚C)

Body material: Brass

ATTENTION: BECOME ALERT!

YOUR SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

RESULT IN A SAFETY HAZARD.

WARNING: This product can expose you to chemicals including lead, which is

known to the State of California to cause cancer and birth defects or other

reproductive harm. For more information go to www.P65Warnings.ca.gov.

Installation

The vent is installed in the vertical position, on distribution manifolds in central boiler

application, on riser pipes and generally in parts of the system where a large concentration of

air pockets is to be expected.

Service Instructions

The seal seat operating mechanism is protected by a ne mesh strainer. If dirt, scale, pipe joint

compound or any other foreign materials becomes trapped in strainer, it may require cleaning.

Be sure the pressure has been reduced to zero and the system temperature is below 100ºF

(38ºC) before disassembly for cleaning. Failure to follow these instructions could result in

property damage and/or personal injury. A large O-Ring is tted between the cover and body

and between the venting mechanism and cover.

CAUTION:

Corrosion or leakage can cause damage or injury.

Periodically inspect for signs of corrosion or leakage. If corrosion or

leakage is note, the vent must be replaced. Failure to follow these

instructions could result in property damage and/or personal injury.

CAUTION:

System uids are under pressure or temperature can be

hazardous. Be sure the pressure has been reduced to zero and the

system temperature is below 100ºF (38ºC). Failure to follow these

instructions could result in property damage and/or personal injury.

CAUTION:

Uncontrolled venting of water can occur with the automatic

air vent if dirt, scale, pipe joint compound or any other foreign materials

becomes trapped in the operating mechanism. Failure to follow these

instructions could result in property damage and/or personal injury.

Caleffi North America, Inc.

3883 West Milwaukee Road

Milwaukee, WI 53208

T: 414.238.2360 F: 414.238.2366

7-19-18

Installation Tip

Scan to view

AIR VENTS

Indice

Altri manuali CALEFFI Unità di controllo

CALEFFI

CALEFFI 636 series Manuale utente

CALEFFI

CALEFFI Z-one ZVR103 Manuale utente

CALEFFI

CALEFFI ThermoSetter 116 Series Guida utente

CALEFFI

CALEFFI NA51 Series Manuale utente

CALEFFI

CALEFFI 115 Series Guida

CALEFFI

CALEFFI 524 Series Manuale utente

CALEFFI

CALEFFI PresCal Compact 533H Series Manuale utente

CALEFFI

CALEFFI 519 Series Manuale utente

CALEFFI

CALEFFI 5201 Series Manuale utente

CALEFFI

CALEFFI 521352A Guida

CALEFFI

CALEFFI 5335 Series Guida utente

CALEFFI

CALEFFI Altecnic SATK40103 Guida

CALEFFI

CALEFFI ThermoSetter 1164 Series Guida utente

CALEFFI

CALEFFI SATK series HIUs Manuale utente

CALEFFI

CALEFFI ThermoSetter 1164 Series Guida utente

CALEFFI

CALEFFI 5350 Series Manuale utente

CALEFFI

CALEFFI TankMixer 520 Series Manuale utente

CALEFFI

CALEFFI 573 Series Guida utente

CALEFFI

CALEFFI 2521 Series Guida utente

CALEFFI

CALEFFI QuickSetter+ 132 Series Manuale utente

CALEFFI

CALEFFI 521201 Guida

CALEFFI

CALEFFI 2527 Series Manuale utente

CALEFFI

CALEFFI 574 series Manuale utente

CALEFFI

CALEFFI SinkMixer Guida

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente