Campbell Raven100 Manuale utente

Raven100 CDMA

AirLink Cellular Modem

Revision: 3/08

Campbell Scientific, Inc.

Warranty and Assistance

The RAVEN100 CDMA MODEM is warranted by CAMPBELL

SCIENTIFIC, INC. to be free from defects in materials and workmanship

under normal use and service for twelve (12) months from date of shipment

unless specified otherwise. Batteries have no warranty. CAMPBELL

SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or

replacing (at CAMPBELL SCIENTIFIC, INC.'s option) defective products.

The customer shall assume all costs of removing, reinstalling, and shipping

defective products to CAMPBELL SCIENTIFIC, INC. CAMPBELL

SCIENTIFIC, INC. will return such products by surface carrier prepaid. This

warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products

which have been subjected to modification, misuse, neglect, accidents of

nature, or shipping damage. This warranty is in lieu of all other warranties,

expressed or implied, including warranties of merchantability or fitness for a

particular purpose. CAMPBELL SCIENTIFIC, INC. is not liable for special,

indirect, incidental, or consequential damages.

Products may not be returned without prior authorization. The following

contact information is for US and International customers residing in countries

served by Campbell Scientific, Inc. directly. Affiliate companies handle

repairs for customers within their territories. Please visit

www.campbellsci.com to determine which Campbell Scientific company

serves your country. To obtain a Returned Materials Authorization (RMA),

contact CAMPBELL SCIENTIFIC, INC., phone (435) 753-2342. After an

applications engineer determines the nature of the problem, an RMA number

will be issued. Please write this number clearly on the outside of the shipping

container. CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____

815 West 1800 North

Logan, Utah 84321-1784

CAMPBELL SCIENTIFIC, INC. does not accept collect calls.

Raven100 Table of Contents

PDF viewers note: These page numbers refer to the printed version of this document. Use

the Adobe Acrobat® bookmarks tab for links to specific sections.

1. General Description.....................................................1

2. Establish Cellular Service...........................................1

2.1 Raven100 Cellular Coverage/Service Requirements................................1

3. Specifications ..............................................................2

3.1 Raven100 Specifications ..........................................................................2

4. Configuration...............................................................2

4.1 Base Station Requirements for Raven100 ................................................2

4.2 Datalogger Site Equipment.......................................................................3

4.3 Power Considerations...............................................................................6

5. Program the Raven100 Modem ..................................6

5.1 Setup Wizard Installation .........................................................................6

5.2 Using the Setup Wizard to Provision and Activate the Modem...............6

5.3 Using Wireless Ace 3G to Configure the Modem..................................11

5.4 Configuring the Raven for Dynamic IP..................................................14

6. LoggerNet/PC400W Software Setup ........................15

7. Troubleshooting ........................................................18

Appendices

A. Wireless Ace Setup without Template File...........A-1

B. Configuring the Raven Modem for PPP................B-1

Figures

4.2-1. Modem Interface Options................................................................. 3-4

4.2-2. Antennas for Use with the Raven Modems..........................................5

7-1. Device Port Configuration.....................................................................20

7-2. Wireless Ace status page showing communications with modem........21

Raven100 Table of Contents

This is a blank page.

Raven100 CDMA AirLink Cellular

Modem

1. General Description

This manual provides information for interfacing the AirLink Raven100

cellular modem to Campbell Scientific dataloggers. An AirLink CD ships with

the modem that includes AirLink manuals and software utilities. AirLink

manuals referenced in this manual include:

AirLinkSetupWizard_InstallationInstructions.pdf

WirelessAce3G_UserGuide2.00.pdf

Verizon_CDMA_Raven_UserGuide2.20b.pdf

Verizon_CDMA_Raven_QSG2.15.pdf

The Raven100 digital cellular modem is manufactured by AirLink for use on

the Verizon Wireless Code Division Multiple Access (CDMA)/1xRTT

network. The modem is accessed through the Internet using TCP/IP

communications protocol using a Static or Dynamic IP address.

•A Static IP address is permanently assigned to a particular account and

will always be used whenever the Raven connects to the Internet.

•A Dynamic IP address is assigned on a “need to have” basis. A dynamic

IP address is used with a service such as IP Manager (Section 5.4) to

translate a dynamic IP address to a domain name, so that the Raven can be

contacted by name as if it had a static IP.

A Verizon account can be setup for a Static or Dynamic IP address; a Static IP

is preferred. Generally, there is a one-time per customer charge to activate a

Static IP account. Once activated, additional Static IP accounts may be added

at no additional charge.

2. Establish Cellular Service

2.1 Raven100 Cellular Coverage/Service Requirements

What you need:

Verizon Wireless CDMA/1xRTT coverage at the datalogger site. For a

coverage map, refer to:

www.verizonwireless.com/b2c/mobileoptions/nationalaccess/serviceAvailability.jsp).

CDMA/1xRTT Static IP or Dynamic IP account established at Verizon

Wireless. Verizon’s National Access Plan (Internet APN) is recommended.

To setup an account you will need the ESN number of the modem. The ESN

number is listed on a label on the modem, and also on the box. To setup an

account with Verizon Wireless, call:

888-384-1775 for Business Sales

888-256-4646 for Personal Sales

Raven100 CDMA AirLink Cellular Modem

What you receive from Verizon:

10-digit Mobile Directory Number (MDN)

Mobile Identification Number (MIN)

System Identification Number (SID)

IP address (for a Static IP account only)

The MDN and MIN are typically the same number, but make sure you get both

numbers.

3. Specifications

3.1 Raven100 Specifications

AirLink Raven100 models C3210, C3211

RF Output: 224 mW (+23.5 dBm)

CDMA Modes Supported: CDMA2000 1X, IS-95B Circuit Switched CDMA,

and SMS

Dual-band Support: 800 MHz cellular, 1.9 GHz PCS bands

Packet Mode (1xRTT) Data Rates: up to 153.6 kbps (forward channel),

76.8 kbps (reverse channel)

RS-232 Data Rates: 1200 bps to 115.2 kbps

Input Voltage: 10 to 28 Vdc

Input Current: 50 to 250 mA

Typical Current Drain at 12 Vdc: 40 mA dormant connection (idle for 10 to 20

seconds), 200 mA while receiving, ~200 mA during transmission

Operating Temperature Range: -30° to +70°C (10% duty cycle limit above

60°C)

Operating Humidity: 5% to 95% non-condensing

Serial Protocols: AT Commands, PPP, SLIP, UDP, TCP

Serial Interface: RS-232, DB-9F

RF Antenna Connector: 50 Ohm TNC

Status LEDs: Power, Channel Acquired, Link Status, Network Registration,

RSSI, Transmit/Receive, Block Errors

Dimensions: 3"W x 1"D x 5.1"L (5.8"L w/connector), 7.6 W x 2.5 D x

13 L cm (14.7 L cm w/connector)

Weight: < 1 lb (<0.5 kg)

4. Configuration

4.1 Base Station Requirements for Raven100

PC running Campbell Scientifics’ LoggerNet or PC400 software, with access

to the internet.

Raven100 CDMA AirLink Cellular Modem

4.2 Datalogger Site Equipment

•Raven modem with power cable (included with modem).

•Datalogger—21X, CR510, CR10(X), CR23X, CR7, CR1000, CR5000,

CR3000, CR800.

•SC105 or SC932A Interface—connects the modem to the 21X, CR510,

CR10(X), CR7, or other dataloggers’ CS I/O port.

If you have a black SC12 cable that is not Rev 1 or newer (as

indicated on cable), it is a CS I/O cable only and will not work

for RS-232. Connect the black SC12 cable between the

datalogger and the SC932A. Use a 9-pin serial cable or a blue

ribbon cable between the phone and the SC932A.

NOTE

•PN 18663 Null Modem Cable—connects the modem to the CR23X,

CR3000, CR800, CR2XX, CR1000 or CR5000 RS-232 port.

SC105 interface connects the modem to a datalogger’s CS I/O port;

recommended for dataloggers with the Pakbus Operating System.

SC932A interface connects the modem to the CS I/O port;

recommended for dataloggers with the Mixed-Array Operating System.

Raven100 CDMA AirLink Cellular Modem

PN 18663 null modem cable connects the modem to a datalogger's

RS-232 port (not compatible with the 21X, CR510, CR10X,

or CR7 dataloggers).

FIGURE 4.2-1. Modem Interface Options.

•PN 13493 Raven Mounting Kit—includes mounting hardware for securing

the modem to below referenced environmental enclosure and a 9-pin male

to 9-pin female cable.

•Antenna—the following antennas are available from Campbell

Scientific. Contact a Campbell Scientific Applications Technician for

help in determining the best antenna for your application.

oThe 18285 1 dBd omnidirectional antenna. This antenna is dual

band, covering both the 800 MHz and 1.9 GHz bands, and is

strongly recommended where cellular coverage is strong. The

18285 includes 10 feet of cable fitted with a TNC male connector

for attachment to the Raven, and a mount/u-bolt assembly for

attaching the antenna to a mast, post, or crossarm up to 1.5" (3.8

cm) in diameter.

oThe 14454 9dBd Yagi Antenna is a higher gain antenna that

should be "aimed" at the service provider's antenna. The 14454

includes 10 feet of cable fitted with a TNC male connector for

attachment to the CDMA modem, and a bracket/u-bolt assembly

for attaching the antenna to a mast or post. This antenna is

recommended for fringe areas that require a higher gain antenna.

oThe 14453 Half-Wave Dipole Whip Antenna is a lower gain

antenna used in transmitting short distances. It is an 800 MHz

cellular antenna that terminates in a TNC Female connector for

attachment to the Redwing modem. This antenna is intended for

use inside the enclosure. Please note that the backplate of the

enclosure is a grounded plane. If it is interposed between the

antenna and the cell tower, it may attenuate the strength of the

transmission signal. Simply turning the enclosure 90 to 180

degrees on its mounting mast may solve weak transmission

issues.

Raven100 CDMA AirLink Cellular Modem

PN 18285 1 dBd Omni Directional Antenna

PN 14454 9dBd Directional Yaggi Antenna

PN 14453 Half-Wave Dipole Whip Antenna

FIGURE 4.2-2. Antennas for Use with the Raven Modems

•Power Supply (see power considerations).

•Environmental Enclosure— ENC 10/12, ENC 12/14, or ENC 16/18.

Raven100 CDMA AirLink Cellular Modem

4.3 Power Considerations

•A power cable included with the modem connects to the datalogger's 12 V

or switched 12 V terminal. Connection to the switched 12 V terminal

allows the datalogger to switch power to the modem during scheduled

transmission intervals if desired.

•When using the switched 12 V terminal, the modem can typically be

powered with a BP12 battery, CH100 charger/regulator, and MSX10 solar

panel.

5. Program the Raven100 Modem

The following software is used to program the modem:

Airlink's SetupWizard, which provisions and activates the modem.

Airlink's Wireless Ace 3G, which is used to configure settings in the modem

and load Campbell Scientific's Raven CDMA template file. The Setup Wizard

and Wireless Ace 3G utilities are available from Airlink’s website

(www.airlink.com/support). The CD that ships with the modem includes the

Wireless Ace 3G utility (but not the Setup Wizard) and the Airlink manuals.

Campbell Scientific’s “Raven CDMA Template 115200” file is for dataloggers

that support 115200 baud (e.g. CR1000), the “Raven CDMA Template 9600”

file is for dataloggers that support a maximum baud rate of 9600 (e.g. CR10X).

The template file configures the modem to be compatible with CSI dataloggers.

Template files are available from Campbell Scientific’s Website:

www.campbellsci.com/downloads.

5.1 Setup Wizard Installation

The Setup Wizard is used to provision and test the modem, and perform

firmware updates where necessary.

The Setup Wizard utility is available from AirLink

(http://www.airlink.com/support). Once the application has been installed, it

can be run from the Windows Start menu or from the desktop icon.

5.2 Using the Setup Wizard to Provision and Activate the

Modem

1. Connect the modem to the computer’s serial port using a serial cable.

2. Connect the power cable to 12 V, and the antenna to the modem.

3. Run the Setup Wizard from the Windows Start menu (Start>All

Programs>AirLink Communications>Setup Wizard>Setup Wizard).

Indice

Altri manuali Campbell Modem

Campbell

Campbell COM9602 Manuale utente

Campbell

Campbell COM220 Manuale utente

Campbell

Campbell R410 Manuale utente

Campbell

Campbell LS300G Manuale utente

Campbell

Campbell COM310 Manuale utente

Campbell

Campbell Raven110 Manuale utente

Campbell

Campbell Sierra Wireless AirLink RV50 Manuale utente

Campbell

Campbell Sierra Wireless RavenXTV Manuale utente

Campbell

Campbell CS-SRM Manuale utente

Campbell

Campbell 4GMini Manuale utente

Campbell

Campbell 9522B Manuale utente

Campbell

Campbell COM320 Manuale utente

Campbell

Campbell Airlink Raven Manuale utente

Campbell

Campbell LS300G-EU Manuale utente

Campbell

Campbell DCSCOM Manuale utente

Campbell

Campbell COM200A Manuale utente

Campbell

Campbell COM110A Manuale utente

Campbell

Campbell Redwing CDMA1X Manuale utente

Campbell

Campbell RavenXTV CDMA Manuale utente

Campbell

Campbell Sierra Wireless AirLink RV50 Manuale utente

Campbell

Campbell IPn3Gb Manuale utente

Campbell

Campbell RF401 Manuale utente

Campbell

Campbell COM300 Manuale utente

Campbell

Campbell Sierra Wireless AirLink RV50 Manuale utente

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente