C&T Solution MX200 Series Manuale utente

MX200 Series

Monitor Module

MX200 l User’s Manual

Table of Contents

Prefaces …………………………………………………….……………………………………………. 03

Revision …………………………………………………………………………………………..……………….……….. 03

Disclaimer ………………………………………………………..…….…….………………………….……………….. 03

Trademarks Acknowledgment …………..………………………………………………………...................03

Environmental Protection Announcement …………………………….………………….……………….. 03

Safety Precautions ………………………………………….……………………………….…………….………….. 04

Technical Support and Assistance …………………………………….…………….…………….…………….05

Conventions Used in this Manual ………………………………………………………………….….………..05

Package Contents …………………………………………………………………………………………….…………06

Ordering Information …………………………………….……………………………………….……….………… 06

Optional Accessory …………...……………………………………..................................................... 06

Chapter 1 Product Introductions ………………………………………………………..… 07

1.1 Overview ……………………….………………………………..………….…………………………..08

1.1.1 Key Feature ………….……………………………………….……….…..…………….......08

1.2 Hardware Specification ….………………………….....…………….…………..………………09

1.3 System I/O ……………………………..……………………..…………………………………………10

1.3.1 Rear ………………….………..……….......................…………………………………… 10

1.3.2 Top ……………………………………………………...……………..……….………………... 10

1.4 Mechanical Dimension …………………………..…………………………..………….………. 11

Chapter 2 Switches and Connectors ……………………………………………………. 12

2.1 Switch and Connector Locations ……………………………………..…….…………….... 13

2.1.1 Top View ………………………………………………………………………..……………… 13

2.1.2 Bottom View ………………………………………………………………………..………..13

2.1.3 Rear I/O ………………………………………………………………………..…………..….. 13

2.2 Connector / Switch Definition ……………………………….……….…….………............ 14

2.3 I/O Interface Descriptions …………................................................................ 15

Chapter 3 Front Panel Controls …………………………..………………………………… 22

3.1 Users Controls ……...………………………………………………………………..………..……...23

3.1.1 Power Button ………………………….……………………………………..………………23

3.1.2 LED ……………………………………………………………..………………………..……….. 23

3.1.3 MENU / Enter Button ……………….………………………………………………..…. 23

3.1.4 Increase Button …………………………..……………………………………………..…. 23

3.1.5 Decrease Button ……………….………………………………………………………..….23

3.1.6 AUTO / Exit Button ……………………………………………………………………..….23

3.2 OSD Operation ……………………………….…..…….………………………….……………….… 24

3.2.1 Luminance ……………………………………………………………….………………..…. 24

3.2.2 Picture ……………………………………………………………………..………………..…. 25

3.2.3 Color …………………………………………………………………………..……………..…. 25

3.2.4 OSD Settings …………………………………………………….………………………..…. 25

3.2.5 Setup ……………………………………………………………………..…………………..….26

Chapter 4 System Setup ……………………..………………………………………………… 27

4.1 Connecting with VIO Series Display Module ……...……………………..……..……... 28

MX200 l User’s Manual

Revision

Disclaimer

All specifications and information in this User’s Manual are believed to be accurate and up to date. C&T

Solution Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading.

The information in this document is subject to change without notice and does not represent a

commitment on the part of C&T Solution Inc.

C&T Solution Inc. disclaims all warranties, express or implied, including, without limitation, those of

merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must

take full responsibility for the application of the product.

electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,

Trademarks Acknowledgment

Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.

Windows® is registered trademark of Microsoft Corporation.

AMI is trademark of American Megatrend Inc.

IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation

All other products and trademarks mentioned in this manual are trademarks of their respective owners.

Environmental Protection Announcement

Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution

and ensure environment protection.

Prefaces

Revision

Description

Date

1.0

Manual Released

2021/06/30

Preface

MX200 l User’s Manual

Safety Precautions

Before installing and using the equipment, please read the following precautions:

Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

The power outlet shall be installed near the equipment and shall be easily accessible.

Turn off the system power and disconnect the power cord from its source before making any

installation. Be sure both the system and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the equipment is properly grounded.

When the power is connected, never open the equipment. The equipment should be opened

only by qualified service personnel.

Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use

liquid or spray detergents for cleaning.

Avoid the dusty, humidity and temperature extremes.

Do not place heavy objects on the equipment.

If the equipment is not used for long time, disconnect it from the power to avoid being

damaged by transient over-voltage.

The storage temperature shall be above -20°C and below 70°C.

The computer is provided with a battery-powered real-time clock circuit. There is a danger of

explosion if incorrectly replaced. Replace only with the same or equivalent type

recommended by the manufacturer.

If one of the following situation arises, get the equipment checked be service personnel:

•The power cord or plug is damaged.

•Liquid has penetrated into the equipment.

•The equipment has been exposed to moisture.

•The equipment does not work well or it cannot work according the user’s manual.

•The equipment has been dropped and damaged.

•The equipment has obvious signs of breakage.

Preface

MX200 l User’s Manual

Technical Support and Assistance

1. Visit the C&T Solution Inc website at https://www.candtsolution.com where you can find the latest

information about the product.

2. Contact your distributor, our technical support team or sales representative for technical support if

you need additional assistance. Please have following information ready before you call:

Model name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software, etc.)

A complete description of the problem

The exact wording of any error messages

Conventions Used in this Manual

Preface

This indication alerts operators to an operation that, if not strictly observed,

may result in severe injury.

WARNING

This indication alerts operators to an operation that, if not strictly observed,

may result in safety hazards to personnel or damage to equipment.

CAUTION

This indication provides additional information to complete a task easily.

NOTE

MX200 l User’s Manual

Package Contents

Before installation, please ensure all the items listed in the following table are included in the package.

Preface

Note: Notify your sales representative if any of the above items are missing or damaged.

Item

Description

Q’ty

MX200

Seris Monitor Module 1

USB Cable

VGA Cable

Screw Pack

Ordering Information

Model No. Product Description

MX200 Monitor Module with 1x VGA Input, 1x HDMI Input, 1x DP Input, 1x USB

2.0 Input

Optional Accessories

Model No. Product Description

-E09A06008

Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch

SFICBL022

Power Cord, 3

-pin US Type, 180cm

-TPCD00002

Power Cord, European Type, 180cm

-TPCD00001

Power Cord, 3

-pin UK Type, 180cm

Chapter 1

Product Introductions

MX200 l User’s Manual

1.1 Overview

The MX200 series monitor module featuring with flat surface, IP 65 dust/waterproof front panel, and

aluminum die-casting front frame with rugged body structure, it is rugged and reliable for industrial

environment. By supporting Multi-Mode Display Module (MDM) technology, enabling MX200 series

monitor module to configure, upgrade and maintain easily.

The MX200 series supports both digital and analog signal input via three types of display interface:

VGA, HDMI and DisplayPort. Touch screen can be connected with USB or COM port. It also has multi-

language OSD function for adjusting the view options of display. In addition, supporting wide range

power input from 9 to 48VDC and high reliability even operating in temperature extremes, MX200 is

designed as an ideal solution for industrial application.

Featuring with completely cable-less designed and high functional, MX200 series are ruggedized

display systems that can operate in harsh environments and easy to install and maintain. A build in

over voltage protection (OVP), over current protection (OCP), reserve protection, and wide range DC

power input makes MX200 series are safety system for all industrial applications.

Chapter 1: Product Introductions

1.1.1 Key Features

1x VGA, 1x DisplayPort, 1x HDMI

1x USB 2.0, 1x COM, 1x Audio

9 to 48VDC wide range power input

-10°C to 60°C extended operating temperature

MX200 l User’s Manual

1.2 Hardware Specification

Chapter 1: Product Introductions

I/O

•1x VGA Input

•1x HDMI Input

•1x DisplayPort Input

•1x Audio Input

•1x USB 2.0 Input

•1x COM Port Input (Resistive Touch Only) (USB

& COM port are reserved for the connection to

enable touch usage only)

Power

•1x 3-pin Terminal Block Connector with Power

Input 9~48VDC

•Power Ignition Sensing

•1x Optional AC/DC 12V/5A, 60W Power

Adapter

•Power Protection

OVP (Over Voltage Protection)

OCP (Over Current Protection)

Reserve Protection

Environment

•Operating Temperature: Ambient with Air Flow:

-10°C to 60°C (with Industrial Grade Peripherals)

•Storage Temperature: -20°C to 70°C

•Relative humidity: 10%~95% (non-condensing)

Physical

•Dimension: 246 (W) x 220 (D) x 37 (H) mm

•Weight: 1.61kg

•Construction: Extruded Aluminum with Heavy

Duty Metal

•Mounting: VESA Mounting Holes 75 x 75mm,

100 x 100mm

Certifications

•CE

•FCC Class A

MX200 l User’s Manual

Chapter 1: Product Introductions

1.3 System I/O

1.3.1 Rear

DC IN

Used to plug a DC power input

with terminal block.

HDMI

Used to connect a DisplayPort monitor

VGA

Use the rear panel standard 15-pin female VGA

connector to connect the monitor to the system

graphics interface.

DisplayPort

The DisplayPort connector connects to a display

device with DisplayPort interface.

COM Port for Touch Panel Connector (Resistive

Touch Only)

Use the rear panel female DB-9 touch panel

connector to connect the monitor to the system

interface.

USB for Touch Panel Connector

Use the rear panel standard USB touch panel

connector to connect the monitor to the system

interface.

Audio-in

This port connects PC audio source by the bundled

audio cable.

1.3.2 Top

VESA Mounting Hole

These are mounting holes for VESA

mount (75x75mm and 100x100mm)

Indice

Altri manuali C&T Solution Unità di controllo

C&T Solution

C&T Solution MX100 Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente