Canon Multi-PDL Printer Kit-E1 Manuale utente
SERVICE
MANUAL
imageRUNNER
iR2270/2870/
3570/4570
Multi-PDL
Printer Kit-E1
COPYRIGHT 2004 CANON INC. CANON imageRUNNER Multi-PDL Printer Kit-E1 REV. 0 PRINTED IN U.S.A.
DU7-1133-000
SEPT. 2004
REV. 0
SM cover Multi PDL.qxd 9/20/2004 2:36 PM Page 1
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are sold. For
this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes
in products. When changes occur in applicable products or in the contents of this manual, Canon will
release technical information as the need arises. In the event of major changes in the contents of this
manual over a long or short period, Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with
local law.
Trademarks
The product names and company names used in this manual are the registered trademarks of the
individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced or translated into another language, in whole or in part, without the written consent
of Canon Inc.
COPYRIGHT © 2001 CANON INC.
Printed in Japan
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
Introduction
Symbols Used
This documentation uses the following symbols to indicate special information:
Symbol Description
Indicates an item of a non-specific nature, possibly classified as Note,
Caution, or Warning.
Indicates an item requiring care to avoid electric shocks.
Indicates an item requiring care to avoid combustion (fire).
Indicates an item prohibiting disassembly to avoid electric shocks or
problems.
Indicates an item requiring disconnection of the power plug from the electric
outlet.
Indicates an item intended to provide notes assisting the understanding of the
topic in question.
Indicates an item of reference assisting the understanding of the topic in
question.
Provides a description of a service mode.
Provides a description of the nature of an error indication.
Memo
REF.
Introduction
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the
relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams, represents the path of mechanical drive; where a signal name
accompanies the symbol, the arrow indicates the direction of the electric
signal.
The expression "turn on the power" means flipping on the power switch, closing the front
door, and closing the delivery unit door, which results in supplying the machine with
power.
2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is
"High", while '0' is used to indicate "Low".(The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked
in the field. Therefore, the operations of the microprocessors used in the machines are
not discussed: they are explained in terms of from sensors to the input of the DC
controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify and
isolate faults in the machine."
Contents
Contents
Chapter 1 Specifications
1.1 Product composition .................................................................................................. 1-1
1.1.1 Product Composition (USA)............................................................................... 1-1
1.2 Specifications............................................................................................................. 1-2
1.2.1 Specifications ...................................................................................................... 1-2
1.2.2 PCL Printer Driver .............................................................................................. 1-3
1.2.3 PS Printer Driver................................................................................................. 1-4
Chapter 2 Functions
2.1 New Function............................................................................................................. 2-1
2.1.1 Canon Driver Information Assist Service (DIAS).............................................. 2-1
2.1.2 FTP Printing........................................................................................................ 2-3
2.1.3 PS-MODE ........................................................................................................... 2-6
2.1.4 Halftone Settings................................................................................................. 2-6
2.1.5 Secured Print Jobs............................................................................................... 2-7
2.1.6 Up to 50 mm of Gutter...................................................................................... 2-11
2.1.7 Processing on System........................................................................................ 2-13
Chapter 3 Installation
3.1 Points to Note About Installation............................................................................... 3-1
3.1.1 Precaution for installation ................................................................................... 3-1
3.2 Checking components................................................................................................ 3-2
3.2.1 Checking the Contents ........................................................................................ 3-2
3.3 Installation procedure ................................................................................................ 3-4
3.3.1 Installation........................................................................................................... 3-4
Chapter 1
Specifications
Contents
Contents
1.1 Product composition...................................................................................1-1
1.1.1 Product Composition (USA)...............................................................1-1
1.2 Specifications .............................................................................................1-2
1.2.1 Specifications ......................................................................................1-2
1.2.2 PCL Printer Driver ..............................................................................1-3
1.2.3 PS Printer Driver .................................................................................1-4
Chapter 1
1-1
1.1 Product composition
1.1.1 Product Composition (USA) 0008-5248
Multi-PDL Printer Kit-E1 USA
F-1-1
[1] Boot ROM (type N)..............................................................................1 pc.
[2] User Software CD-ROM Unit (English)..........................................1 pc.
[3] N/W ScanGear CD-ROM (English).................................................1 pc.
[4] Release Note (English)....................................................................1 pc.
[5] N/W Quick Start Guide (English).....................................................1 pc.
[6] User's Manual CD-ROM (English)..................................................1 pc.
[1] [2]
[3]
[5]
[4] [6]
Chapter 1
1-2
1.2 Specifications
1.2.1 Specifications 0008-5245
The main specifications and features of the kit are as shown below.
<Characteristics>
- printing is virtually immediate
- output is close to screen display
T-1-1
Specifications
Data processing
resolution
600 dpi
Effective print area PCL main scanning direction: 1/6 inch
sub scanning direction: 1/6 inch
PS3 main scanning direction: 2.5mm
sub scanning direction: 2.5mm
Supported operating
systems
Windows 2000 Professional/Server/Advanced
Server
Windows XP Home Edition/Professional
Windows Server 2003 Stadard Edition/Enterprise
Edition
Windows 98/98SE/ME
Windows NT4.0 Workstation/Server
Paper size default papers
Chapter 1
1-3
Non-default paper
T-1-2
User-defined paper
PCL minimum 90.53 mm× 131.53 mm
maximum 288.53 mm × 423.53 mm
PS3 minimum 94.00 mm × 135.00 mm
maximum 292.00 mm × 427.00 mm
Note:
The value in parentheses indicates the area in
mm2.
- The height and width can be specified by 1/10 mm(Except US)or 1/100 inch(US).
- The height must be equal to or greater than width.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Canon Accessori per stampanti
Canon
Canon Printer Accessories Manuale utente
Canon
Canon imageFORMULA Flatbed Scanner Unit 102 Manuale utente
Canon
Canon Inner Finisher Additional Tray-A1 Manuale operativo e di manutenzione
Canon
Canon MF9100 Series Manuale utente
Canon
Canon Voice Operation Kit Manuale utente
Canon
Canon Buffer Pass Unit-N1 Manuale utente
Canon
Canon External 2/3 Hole Puncher-B1 Manuale utente
Canon
Canon Finisher-R1 Manuale utente
Canon
Canon Color Network Printer Unit-D1 Manuale di riferimento
Canon
Canon Multi Function Professional Puncher-A1 Manuale utente
Canon
Canon Duplex Unit-A1 Manuale operativo e di manutenzione
Canon
Canon DADF-M1 Manuale utente
Canon
Canon Super G3 FAX Board-T1 Manuale operativo e di manutenzione
Canon
Canon LK-62 Manuale utente
Canon
Canon TonerRobot EP-27 Manuale utente
Canon
Canon imagePROGRAF SS-41 Manuale utente
Canon
Canon Inner 2 Way Tray-E1 Manuale utente
Canon
Canon imagePROGRAF SD-21 Manuale utente
Canon
Canon iR ADV 4025i Series Manuale utente
Canon
Canon PD-82 Manuale utente
