Canon Shift Tray-E1 Manuale utente
654321
Shift Tray-E1
Service Manual
Contents
1 Product Specications----------------------------------------------------1-2
Names of Parts ---------------------------------------------------------------1-2
Basic Construction ---------------------------------------------------------2-2
2 Basic Operation ------------------------------------------------------------2-3
3 Maintenance and Inspection --------------------------------------------3-2
Scheduled Servicing Chart--------------------------------------------------------------- 3-2
4 Outline of Electrical Components--------------------------------------4-2
Removing from the Host Machine --------------------------------------------4-2
Removing the Shift Tray ------------------------------------------------------------------- 4-2
Drive System ------------------------------------------------------------------4-4
Removing the Shift Tray ------------------------------------------------------------------ 4-4
Electrical System--------------------------------------------------------------4-7
Removing the Shift Tray ------------------------------------------------------------------ 4-7
5 Adjustment at Time of Parts Replacement --------------------------5-2
6 Installation
Shift Tray-E1Shift Tray-E1 -------------------------------------------------------------------6-2
Checking the Contents -------------------------------------------------------------- 6-2
Checking before Installation -------------------------------------------------------- 6-3
Installation Procedure --------------------------------------------------------------- 6-3
1
1
Product Specication
Specication
Names of Parts
■
■
1
1
1-2
1-2
Product Specications
Specications
Item Description
Method of stacking Sorting by shifting trays
face up/ face down stacking
Mode of stacking non-sort, sort (stack shift)
Source of drive ascent/descent: by coil spring (descent by paper weight)
shift movement: by motor
Size of paper for stack*1 non-sort: A3, A4, A4R, A5R, B4, B5, B5R, 11x17, LGL, LTR,
LTR-R, STMT-Rsort: A3,A4, B4, B5, 11x17, LGL, LTR
Paper type plain paper (64 to 90g/m2), recycled paper (64 to 80g/m2), eco
paper, tracing paper, transparency, colored paper, postcard,
double-postcard, 4-plane postcard, label paper, thick paper (91
to 200g/m2)
Weight of Paper for stack 64g/m2 to 200g/m2
Movement of offset in units of sets
Maximum number of sets in stack sort:500sheets(64g/m2 paper)
non-sort:250sheets(64g/m2 paper)
Accuracy of alignment sort:50mm or less(delivery direction)
20mm or more(shift direction,between stacks)
between stacks-5mm or less(shift direction,within stack)
non-sort:100mm or less
Tray full detection*2 by reection type sensor (2 pc.) monitoring height of stack
Power supply DC24V/DC5V(from host machine)
Maximum power consumption 12W or less
Dimensions 365.3mm(W)x547mm(D)x255.7mm(H)
Weight 4.2kg
Operation environment same as host machine
*1: tranceparencies, postcards and label papers may not be sorted.
*2: the machine stops printing when the stack exceeds a specic height.
●
T-1-1T-1-1
Names of Parts
Names of Parts
[10]
[5]
[1] [7] [3]
[8]
[2]
[6]
[9]
[4]
[1] Tray [2] Tray full sensor (front)
[3] Tray full sensor (rear) [4] Tray drive unit
[5] Shift tray drive PCB [6] HP sensor (front)
[7] HP sensor (rear) [8] Light-blocking plate
[9] Paper sensor [10] Shift Drive unit
●
F-1-1F-1-1
2
2
Functions
Basic Construction
Basic Operation
■
■
2
2
2-2
2-2
Basic Construction
Inputs to and Outputs from the Shift Tray Driver
PCB
+5V
HP sensor
(front) PS101
J103
-6
-5
-4
J203
-1
-2
-3
J204
-1
-2
-3
J206
-1
-2
-3
J207
-1
-2
-3
J208
-1
-2
-3
STHPR
+5V
HP sensor
(rear) PS102
J103
-3
-2
-1 STHPL
when tray is HP at front, '1'.
when tray is HP at rear, '1'.
+5V
Tray paper
sensor PS103
J104
-6
-5
-4 SPEXIST*
J205
N.C. N.C.
-1
-2
-3
-4
-4
-3
-2
-1
when paper is present in tray, '0'.
+5V
+5V
Tray full sensor
(rear) PS104
J104
-3
-2
-1 SPCFULL* when stack of sheets exceeds limit, '0'.
when stack of sheets exceeds limit, '0'.
tray moves to front when +24 V is applied to SDCM1
tray moves to rear when +24 V is applied to SDCM2
Tray full sensor
(front) PS105
J106
-3
-2
-1 SPSFULL*
Shift motor
J105
-1
-2 SDCM1
SDCM2
M101
Shift tray driver PCB
●
F-2-1F-2-1
Outline of the Electrical Circuitry
The circuit shown below is used to drive the shift motor according to the shift control signal
from the host machine and also to send various sensor signals associated with the shift
operation to the host machine.
Shift drive PCB
Motor drive
circuit
J102
J101 J201
J202
Motor drive
signal
Sensor signal
A24V
A5V To host machine
To host machine
Sensor
Shift motor
M
●
•
F-2-2F-2-2
2
2
2-3
2-3
Basic Operation
Shift Movement
The machine moves the tray to the front and the rear to sort stacks (offset). The tray is
driven by a DC motor, and the rotation of the motor is converted into liner movement
by means of a rack and pinion gear mechanism. The location of the tray (front, rear) is
monitored by the HP sensor mounted to the front and the rear.
Light-blocking plate
HP sensor (rear)
PS102
HP sensor (front)
PS101
Tray drive unit
●
•
F-2-3F-2-3
Placement of Paper
The machine's tray is held up by the work of a coil spring. When paper is placed, the tray
moves down under the weight of the paper. The height of the stack in the tray is monitored
by the tray full sensor (reection type photo sensor), and the shift tray driver PCB sends the
tray full signal to the host machine when the top of the stack reaches a specic height.
Room for
more paper
Tray full sensor (rear)
PS104
Tray full sensor (front)
PS105
Shift
Shift
Tray
Room for
more paper
No room
for paper
Detecting the Presence/Absence of Paper
The presence/absence of paper in the tray is detected by the paper sensor mounted to the
tray.
Tray paper sensor
PS103
●
•
●
•
F-2-4F-2-4
F-2-5F-2-5
2
2
2-4
2-4
Delivery Movement
The paper from the host machine is delivered to the tray through the shift drive unit, which
is driven by the host machine's gear mechanism.
●
•
•
F-2-6F-2-6
3
3
Periodical Servicing
Maintenance and Inspection
■
3
3
3-2
3-2
Maintenance and Inspection
Periodical Servicing
Scheduled Servicing Chart
Illust No. Parts name Scheduled servicing
250,000 Remarks
1 Tray full sensor (front/rear) clean
The following gure shows the locations of the parts that require scheduled servicing:
[1]
[1]
●
■
F-3-1F-3-1
Indice
Altri manuali Canon Accessori per stampanti
Canon
Canon DADF-AV1 Manuale utente
Canon
Canon TonerRobot EP-27 Manuale utente
Canon
Canon Cassette Heater Unit 27 Manuale utente
Canon
Canon Puncher Unit-L1 Manuale utente
Canon
Canon Paper Deck-V1 Manuale di servizio
Canon
Canon Finisher-T1 Manuale utente
Canon
Canon Duplex Unit-A1 Manuale di servizio
Canon
Canon imagePROGRAF RU-42 Manuale utente
Canon
Canon BJC-85 Manuale utente
Canon
Canon Duplex Unit-A1 Manuale operativo e di manutenzione
Canon
Canon DU7-1101-000 Manuale utente
Canon
Canon BW Printer Kit-G2 Manuale operativo e di manutenzione
Canon
Canon DADF-N1 Manuale utente
Canon
Canon Additional Finisher Tray-C1 Manuale utente
Canon
Canon Super G3 FAX Board-T1 Manuale operativo e di manutenzione
Canon
Canon SELPHY BU-20 Guida alla configurazione
Canon
Canon Puncher Unit-BF1 Manuale utente
Canon
Canon Finisher-U1 Manuale utente
Canon
Canon External 2/3 Hole Puncher-B1 Manuale utente
Canon
Canon High Capacity Stacker-G1 Manuale utente
