Canon USB Application Interface Board-D1 Manuale utente
SERVICE
MANUAL
USB Application
Interface Board-D1
COPYRIGHT 2004 CANON INC. CANON imageRUNNER USBApplication Interface Board-D1 REV. 0 PRINTED IN U.S.A.
DU7-1136-000
SEPT. 2004
REV. 0
SM cover USB App Interface.qxd 9/20/2004 2:42 PM Page 1
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are sold. For
this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes
in products. When changes occur in applicable products or in the contents of this manual, Canon will
release technical information as the need arises. In the event of major changes in the contents of this
manual over a long or short period, Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with
local law.
Trademarks
The product names and company names used in this manual are the registered trademarks of the
individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced or translated into another language, in whole or in part, without the written consent
of Canon Inc.
COPYRIGHT © 2001 CANON INC.
Printed in Japan
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
Introduction
Symbols Used
This documentation uses the following symbols to indicate special information:
Symbol Description
Indicates an item of a non-specific nature, possibly classified as Note,
Caution, or Warning.
Indicates an item requiring care to avoid electric shocks.
Indicates an item requiring care to avoid combustion (fire).
Indicates an item prohibiting disassembly to avoid electric shocks or
problems.
Indicates an item requiring disconnection of the power plug from the electric
outlet.
Indicates an item intended to provide notes assisting the understanding of the
topic in question.
Indicates an item of reference assisting the understanding of the topic in
question.
Provides a description of a service mode.
Provides a description of the nature of an error indication.
Memo
REF.
Introduction
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the
relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams, represents the path of mechanical drive; where a signal name
accompanies the symbol, the arrow indicates the direction of the electric
signal.
The expression "turn on the power" means flipping on the power switch, closing the front
door, and closing the delivery unit door, which results in supplying the machine with
power.
2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is
"High", while '0' is used to indicate "Low".(The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked
in the field. Therefore, the operations of the microprocessors used in the machines are
not discussed: they are explained in terms of from sensors to the input of the DC
controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify and
isolate faults in the machine."
Contents
Contents
Chapter 1 Specifications
1.1 Product composition .................................................................................................. 1-1
1.1.1 Product Configuration......................................................................................... 1-1
1.2 Specifications............................................................................................................. 1-2
1.2.1 Specifications ...................................................................................................... 1-2
Chapter 2 Installation
2.1 Checking components................................................................................................ 2-1
2.1.1 Checking the Contents ........................................................................................ 2-1
2.2 Installation procedure ................................................................................................ 2-2
2.2.1 Installation Procedure (iR4570/3570, 2870/2270 Series)................................... 2-2
2.2.2Mounting the Ferrite Core (outside North America) .......................................... 2-6
Chapter 3 Maintenance
3.1 Related Service Mode................................................................................................ 3-1
3.1.1 Service Mode List .............................................................................................. 3-1
Chapter 1
Specifications
Contents
Contents
1.1 Product composition...................................................................................1-1
1.1.1 Product Configuration.........................................................................1-1
1.2 Specifications .............................................................................................1-2
1.2.1 Specifications ......................................................................................1-2
Chapter 1
1-1
1.1 Product composition
1.1.1 Product Configuration 0008-5313
This kit consists of the following items.
F-1-1
T-1-1
[1] Security Expansion Board (USB) - D1 1
[2] Ferrite Core 2
[3] Tie-wrap 2
Chapter 1
1-2
1.2 Specifications
1.2.1 Specifications 0008-5316
The Security Expansion Board (USB)-D1, an optional board connected with PCI, has 2
functions. One is to add 2 USB host terminals required when the IC card reader or the like
is connected to the host machine with USB in MEAP environment.
The other is to add the encryption accelerator chip required when HDD encryption
processing is speeded up during installation of the security kit.
The USB host interface function becomes enabled by combination with an USB-supported
MEAP application. The encryption accelerator function cano be used only while the
security kit is enabled.
The PCI Bus Extension Kit is necessary to install the Security Expansion Board (USB)-D1.
Main specifications of the Security Expansion Board (USB)-D1 are as follows:
USB Host Interface Function
- USB full speed (equivalent to USB1.1)
- USB host terminal: 2 pcs.
- Max. power supply at the host terminal: 500mA per port
Encryption Accelerator Function
- Encryption processing accelerator IC Motorola-made MPC190
- Supported encryption system
Public key cryptogram system: RSA Diffie-Hellman,
Elliptic curve cryptogram system
Common key encryption system: DES, 3DES, RC4
Chapter 2
Functions
Indice
Altri manuali Canon Accessori per stampanti
Canon
Canon Puncher Unit-L1 Manuale operativo e di manutenzione
Canon
Canon imagePROGRAF RS-01 Manuale utente
Canon
Canon imagePROGRAF RU-63 Manuale utente
Canon
Canon Color Network Printer Unit-D1 Manuale di riferimento
Canon
Canon BH-10 Manuale utente
Canon
Canon PD-82 Manuale utente
Canon
Canon FX-201 Manuale per l'uso e la cura
Canon
Canon Color imageCLASS MF8170c Manuale utente
Canon
Canon Finisher-R1 Manuale di servizio
Canon
Canon Super G3 FAX Board-T1 Manuale operativo e di manutenzione
Canon
Canon Puncher Unit-L1 Manuale utente
Canon
Canon Multi Function Professional Puncher-A1 Manuale operativo e di manutenzione
Canon
Canon High Capacity Stacker-G1 Manuale utente
Canon
Canon imagePROGRAF RU-61 Manuale utente
Canon
Canon Puncher Unit-P1 Manuale utente
Canon
Canon Puncher Unit-N1 Manuale di servizio
Canon
Canon imagePROGRAF SD-33 Manuale utente
Canon
Canon AE-1 Guida di riferimento
Canon
Canon AD2 Manuale utente
Canon
Canon DADF-M1 Manuale utente
