Canon MultiPASS L6000 Manuale utente
Congratulationsonyourpurchaseofthe
CanonMultiPASS™L6000LaserPrinter-
Fax-Copier-Scanner.
ThisQuickStartGuidedescribes
thestepsyoufollowtounpack
andsetupyournew
multi-talentedprinter.
Quick Start Guide
Laser Printer
Fax Copier Scanner
TM
TM
See What We Mean.
™
Important! Youmustfollowthesteps
describedinthisQuickStartGuide.
©1997 Canon Computer Systems, Inc. CST-4445-000 Printed in U.S.A.
Quick Start Guide
Laser Printer
Fax Copier Scanner
1
Carefully remove
all items from
the box.
Remove the items from the documentation package.
Remove these hardware items from the top tray:
2
Important! Before you start, make sure you have the following computer setup.
(These are the minimum requirements.)
IBM®PC or compatible computer with a 486 PC processor or better
(Pentium® recommended)
Microsoft®Windows®95 (not compatible with Windows 3.1)
16 megabytes (MB) of RAM
Hard disk space:
MultiPASS Printer Driver, MultiPASS Desktop Manager for Windows 95,
and ScanGear™ for MultiPASS – 25 MB
WebRecord™ – 8 MB
Internet Utilities 97™ – 7 MB
AT&T WorldNetSM Service including Microsoft Internet Explorer – 36 MB
Bi-directional, Centronics®-compatible parallel cable (IEEE 1284-compliant);
a cable less than 6.6 feet in length is recommended
14.4 Kbps modem or faster (28.2 Kbps recommended)
Standard telephone line
CD ROM drive (2x or better) (If you do not have a CD ROM drive, you can call
the Canon Customer Care Center to order the MultiPASS Desktop Manager and
Printer Setup on diskettes. See page 23 for details.)
Lift out the MultiPASS unit.
Always lift the unit from the bottom.
PAPER REST
TELEPHONE
LINE POWER
CORD
SUPPORT TRAYS
FX-3 TONER
CARTRIDGE
Important! Save the box and shipping
materials. You may need them later if
you have to transport the MultiPASS.
Unpack the MultiPASS L6000
PAPER LOADING
LABEL
EXTENSION TRAY
3
Make sure your
documentation
package includes
these items.
2
MultiPASS L6000 and Creative Web
Solutions CD (INSTALL ME FIRST)
Quick Start Guide (this booklet)
User's Manaul
Important! Save your sales receipt for proof of purchase in case your MultiPASS
requires warranty service.
Registration card
Warranty card
Customer Care rolodex card
Be sure to register electronically or fill out your Registration card and send it to
Canon. After you set up the MultiPASS L6000, you can fax the Registration card
directly to Canon (see the Registration card for details).
Remove all
pieces of
shipping tape
from the unit.
3
Remove all pieces of shipping tape from the outside of the MultiPASS.
Note that tape
may not be in
the exact locations
shown here.
Lift the
operator panel
and remove the
soft styrofoam
from the unit's
Automatic
Document
Feeder (ADF).
4
Use both hands to grip the operator panel, and gently pull it toward you.
Remove the soft styrofoam sheet.
Gently press the operator panel
to close it.
Setting Up the MultiPASS L6000
5
Peel the clear
protective
sheet off the
LCD display.
4
With the paper rest tilted toward you, fit the tabs on the paper rest into the slots
above the multi-purpose tray.
PlacethemainunitoftheMultiPASSL6000onalevelsurfacewithplentyofroom
towork.
1
Attach the
paper rest.
Attaching Miscellaneous Items
Gently move the paper rest
back into position.
5
Attach the
extension tray.
3
Lift up the front of the MultiPASS L6000 unit.
Slide the extension tray into the rails on the bottom of the unit.
The paper loading label is included with your MultiPASS unit.
Attach the label to the left of
the multi-purpose tray.
2
Attach the
paper loading
label.
EXTENSION TRAY
6
Attach the
support trays.
4
There are two identical support trays. One of the support trays holds paper as it
comes out of the facedown delivery slot. To install this support, insert the tabs
into the corresponding slots above the facedown delivery slot, making sure that
the smaller tab is on the left.
FACEDOWN
DELIVERY
SLOT
The other support tray holds documents as they are fed into the Automatic
Document Feeder (ADF). To install this support, insert the tabs into the
corresponding slots above the ADF, making sure that the smaller tab
is on the left.
AUTOMATIC
DOCUMENT
FEEDER
(ADF)
7
Connect one end of the supplied telephone line to the jack on the side of
the MultiPASS.
1
Connect the
phone line.
Connecting the Phone Line(s), Printer Cable, and Power Cord
L
Connect the other end of the line to the telephone jack in your wall.
You can connect a telephone, answering machine, or data modem to the jack
on the side of the MultiPASS.
2
Connect a
telephone,
answering
machine, or
data modem.
If you have only one telephone line, the most efficient way to use your system
is to attach a cordless phone with a built-in answering machine to the
MultiPASS L6000.
If you have a separate telephone and a separate answering machine, be sure to
attach the telephone to the answering machine, and then attach the answering
machine to the MultiPASS L6000.
If you have a modem installed in your computer, you can attach it to the
MultiPASS L6000. Connect the telephone line from the wall outlet to the jack.
Then connect the line from the jack on the MultiPASS to the jack on
the modem. If others access your computer frequently through the modem, or if
you use your modem extensively, you may want a dedicated telephone line for
your modem.
L
HINTS
!
If you have only one telephone line and plan to use the MultiPASS L6000
for receiving both faxes and voice calls, you must attach a telephone and/or
answering machine to the unit.
7
Connect one end of the supplied telephone line to the jack on the side of
the MultiPASS.
1
Connect the
phone line.
Connecting the Phone Line(s), Printer Cable, and Power Cord
L
Connect the other end of the line to the telephone jack in your wall.
You can connect a telephone, answering machine, or data modem to the jack
on the side of the MultiPASS.
2
Connect a
telephone,
answering
machine, or
data modem.
If you have only one telephone line, the most efficient way to use your system
is to attach a cordless phone with a built-in answering machine to the
MultiPASS L6000.
If you have a separate telephone and a separate answering machine, be sure to
attach the telephone to the answering machine, and then attach the answering
machine to the MultiPASS L6000.
If you have a modem installed in your computer, you can attach it to the
MultiPASS L6000. Connect the telephone line from the wall outlet to the jack.
Then connect the line from the jack on the MultiPASS to the jack on
the modem. If others access your computer frequently through the modem, or if
you use your modem extensively, you may want a dedicated telephone line for
your modem.
L
HINTS
!
If you have only one telephone line and plan to use the MultiPASS L6000
for receiving both faxes and voice calls, you must attach a telephone and/or
answering machine to the unit.
Connect a
bi-directional
parallel cable to
the MultiPASS.
3
Make sure the computer is turned off.
You can purchase a Centronics-compatible, parallel cable with bi-directional
capability from your dealer or from any computer store. Make sure the cable is
IEEE 1284-compliant.
A cable of 6.6 feet or less in length is recommended.
Align the cable connector with the interface port so the shapes match.
Gently press the cable connector into the port.
Secure the cable connector by snapping the two wire clips (located on the sides
of the port) into the cable connector.
Connect the other end of the cable to the parallel interface port
on your computer.
8
9
Plug the power cord connector into the back of the unit.
4
Attach the
power cord.
Plug the other end of the power cord into a properly grounded AC outlet
(three-pronged outlet).
The MultiPASS L6000 is equipped with a 3-prong, grounding-type plug
(the third pin is a grounding pin). This plug will only fit into a grounding-type
outlet. This is a safety feature. If you are unable to insert the plug into your
outlet, contact an electrician to replace your outlet (do not use a 3-to-2 adapter).
Do not defeat the safety purpose of the grounding-type plug.
Do not plug the MultiPASS L6000 into the same outlet as your computer or
into an outlet shared with an appliance such as an air conditioner, electric
typewriter, or copier. These devices generate electrical noise that may interfere
with the operation of the MultiPASS L6000.
TheMultiPASSL6000hasnopowerswitch.Thepowerisonaslongasthesystemis
pluggedin.
AstheMultiPASSwarmsup,itdisplaysthePLEASE WAIT messageintheLCD.
Caution
PLEASE WAIT
CHECK COVER/CART
Because the toner cartridge is not installed yet, you will also see this message:
Altri manuali per MultiPASS L6000
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Canon Stampante
Canon
Canon MG2900 Series Manuale utente
Canon
Canon Color imageCLASS X MF1538C Manuale utente
Canon
Canon PIXMA MG7500 Series Manuale utente
Canon
Canon iP6700D - PIXMA Color Inkjet Printer Manuale utente
Canon
Canon PIXMA MX894 Manuale utente
Canon
Canon 4496B008AA Guida all'installazione
Canon
Canon TS9500 Series Guida all'installazione
Canon
Canon iP6210D - PIXMA Color Inkjet Printer Manuale utente
Canon
Canon 1238P Manuale utente
Canon
Canon 9615A001 Manuale utente
Canon
Canon i950 Series Manuale utente
Canon
Canon Color imageCLASS MF8080Cw Manuale utente
Canon
Canon imagePRESS C800 Series Manuale utente
Canon
Canon PIXMA G3430 Manuale utente
Canon
Canon SELPHY ES30 Manuale utente
Canon
Canon imageFORMULA DR-G2140 Manuale utente
Canon
Canon i-SENSYS LBP6670dn Manuale utente
Canon
Canon I450 - i 450 Color Inkjet Printer Manuale utente
Canon
Canon MG6600 Series Manuale utente
Canon
Canon Saddle Finisher-AF2 Manuale utente
