Canon PIXMA MP499 Istruzioni di installazione e manutenzione
Installing Your Multifunction
to Your Network for the First Time
PIXMA MP499
Mac OS
1
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MP499
Mac OS
Preparing to Connect My Multifunction to My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Installing the Drivers & Software 5
Registering the Printer & Scanner 14
2
<< Previous Next >>
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3
Preparing to Connect My Multifunction
To My Network << Previous Next >>
Preparing to Connect My Multifunction
To My Network
Notes on Network Connection
The configuration, router functions, setup procedures and security settings of the network device vary depending on your system
environment. For details, refer to your device's instruction manual or contact its manufacturer.
The machine cannot be used over a wireless and wired connection at the same time.
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
4
<< Previous Next >>
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The
installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application
software to be installed.)
Installing the Drivers & Software
5
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the
Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
<< Previous Next >>
Software Installation
Do not connect the wireless LAN setup cable yet. Software installation requires temporary use
of the wireless LAN setup cable.
Installing the Drivers & Software
6
Step One
Turn on the computer, then insert the Setup CD-
ROM into the CD-ROM drive.
Step Two
Double-click the Setup icon of the CD-ROM folder to proceed to the
following screen.
<< Previous Next >>
Step Four
Click Easy Install. Click Install.
The drivers, application software, and on-screen manuals are installed.
Note: If you want to select particular items to install, click Custom Install.
Step Three
Enter your administrator name and password. Click OK.
If the CD-ROM folder does not open automatically, double-click
the CD-ROM icon on the desktop.
If you do not know your administrator name or password, click
Help , then follow the on-screen instructions.
7
Installing the Drivers & Software << Previous Next >>
Step Six
When the Printer Detection screen appears, click Next.
IMPORTANT
If the Printer Connection screen appears instead of the screen above, the connection
method is not correctly selected in 5.
Follow on-screen instructions and proceed with the installation. Click Exit on the
installation complete screen, then start again from 2 and be sure to select Use the
printer on network in 5.
Step Five
Select Use the printer on network, then click Next.
Follow any on-screen instructions to proceed with the
software installation.
8
Installing the Drivers & Software << Previous Next >>
Step Eight
When the Set Up New Printer screen appears, click Next.
Note:
If the Detected Printers List screen appears, click Set Up New Printer.
Step Seven
Make sure the machine is turned on, then click OK.
9
Installing the Drivers & Software << Previous Next >>
10
Installing the Drivers & Software
Step Nine
When the Connect Cable screen appears, connect the machine to the computer with the wireless LAN setup cable.
Follow the on-screen instructions and click Next.
<< Previous Next >>
Altri manuali per PIXMA MP499
4
Indice
Altri manuali Canon Stampante
Canon
Canon i550 Manuale utente
Canon
Canon PIXMA MP500 Manuale utente
Canon
Canon CLBP360PS Ver-up Manuale utente
Canon
Canon SELPHY CP790 Manuale utente
Canon
Canon PIXMA TS8070 Manuale utente
Canon
Canon PIXMA MX437 Manuale utente
Canon
Canon MultiPASS C50 Manuale utente
Canon
Canon Pixma iP110 series Manuale utente
Canon
Canon PIXMA MP110 Manuale utente
Canon
Canon LBP7780CX Manuale utente
Canon
Canon imageCLASS MF269dw Manuale utente
Canon
Canon G3030 Series Guida all'installazione
Canon
Canon CLC5100 Series Manuale utente
Canon
Canon PIXMA K10335 Manuale utente
Canon
Canon imageRUNNER 2545i Istruzioni per l'installazione e il funzionamento
Canon
Canon PIXMA MX7600 Manuale utente
Canon
Canon Pixma MG5650 Guida all'installazione
Canon
Canon MG6600 Series Manuale utente
Canon
Canon Color imageRUNNER LBP5970 Manuale utente
Canon
Canon MG2900 Series Manuale utente
