Carima DT-110 Manuale utente
Operation
Manual
UVLED 3D PRINTER
DT-110
Table of Contents
1. Product Warranty
2. Safety precautions
3. Product Information
Specification, Consumables
4. Names of Parts
5. How to Attach & Detach Tray
6. How to Detach & Attach Build Plate
7. How to Refill Resin
8. Amount of Resin Refill
9. Tray(VAT) check
10. Maintenance
LED error messages, maintenance
11. UVLED engine Lamp Replacement(Undefined)
1
2
4
5
7
8
9
10
11
12
1
Product Warranty
Thank you for your purchase.
The product is made from precise parts and managed by our quality control.
Carima warrants the product in accordance with following terms If the product
fails during normal use.
Warranty terms
1. If a defect arises with regard to the product during the warranty period,
CARIMA will repair or replace the defective parts of the product with new parts.
2. The warranty period applies for a period of 12 months from the date the Product was
first installed by a consumer.
3. Please contact us at the following numbers.
4. Please keep the original warranty card for future service request.
Exclusions and Limitations
1. If the product or Accessory malfunctions after the Warranty Period expires,
there is no warranty of any kind.
2. It doesn't apply to damage caused by operating the product outside
3. It doesn't apply to damage caused by accident, abuse, misuse, flood, fire,
earthquake, or under abnormal conditions
4. It doesn't apply to the Product damaged in shipping, transit, or on-site handling
during installation.
5. It doesn't apply to a product or part that has been modified to alter functionality
without the written permission of carima
6. If things including item description, installation date, signature are removed, Carima
is not responsible for the loss.
▶During the warranty period, Carima will either repair or replace
any defective product at no charge.
▶If a defect arises in the product after warranty period or in the
event of warranty exclusions, we may charge you a fee.
Please contact us for support at +82-2-3663-8877
Installation date : . . .
Item description :_____________________________________________
2
Safety precautions
- Read this manual carefully for proper handling and operation, before
installing, operating, maintaining and inspecting.
- It is designed to help ensure your own personal safety and to help protect your
equipment from potential damage.
- Failure to observe the safety notes may lead to serious injuries and to significant
damages to the system.
!Place the machine in well-ventilated place due to smell of the resin.
! Do not insert tools or parts of body into machine during the printing process.
! Never look directly into light beam in order to protect your eyes.
!Never use gasoline for printing. Please keep it away from the machine.
Also, 3D prints or resin residue shouldn't be swallowed, as It could cause disorientation
and suffocation.
! Stop the printer from processing and take the resin tray out not to overflow resin. and
then turn off the machine and move it.
!Do not turn power switch off when it's on. It reduces life span of engine and could be
one of errors. Get it ended as given in manual
!Putting some of liquid or metal pieces into printer is harmful for fire disease or
electric shock. Also, Do not operate the machine with wet hands protecting from fire or
electric shock.
! Do not ruin main power of printer. Neither change or ruin USB cables or supply power
raised from outside.
! Carefully choose place for installation protecting from pet or child injuries made by
printer
! Standard accessories include sharp tools such as cutter or nipper. Be careful not to cut
yourself on any sharp edges.
! The space inside machine is designed to be taken up by light of engine.
please do not insert anything else inside.
! Protect the machine from dampness, such as rain and now, and dusty weather.
! Install and operate the machine on a flat level and dry surface. Keep the machine away
from flammable liquids, gases, and aerosols.
! Do not impose excessive force on the machine. The external housing of your machine
may be damaged Also, Read all instructions before using the machine.
Use of resin
!Be careful about resin from contacting skin or body part.
-If in contact, rinse in running water and make sure to wear gloves during work.
Replacement of resin
Lifetime of UVLED engine
3
!Remove alien substances and scraps at the bottom of tray.
- Remaining scraps may have adverse effects on the output.
! After replacing resin, stir well before use since precipitates can be formed.
Cleaning of build plate and tray
! Check for alien substances and scraps on build plate and tray every time.
- Remaining scraps may have adverse effects on the output.
- Regular management and cleaning of tray are necessary.
! Coating can be damaged if the tray is cleaned with a sharp object.
- Use a spatula or dry cotton cloth as cleaning tool.
! Poor cleaning can lead to poor quality of output and lifting or cracking of floor.
Lifetime of UVLED engine lamp is 20,000 hours, and brightness of the lamp can
be reduced by exceeding its lifetime. Replace the lamp after using it for 20,000
hours to increase quality of output.
Preparation for A/S request
Record error situation, interior of the printer, and LCD display as photograph or
video.
- A/S can be much easier if the user explains the situation clearly.
Product Information
Model Name DT-110
Resolution of UVLED engine 1024 x 760
Build size (mm) 110 x 62 x 150
Layer thickness (mm) 0.025 [0.025/0.05/0.075/0.1 (4 steps)]
X,Y Resolution 50μm
Product size (mm) 304 x 316 x 622
Product weight (kg) 20
Rating 100~240V, 50/60Hz
Material used ACRYLIC(Undefined)
System control Control using touch-type embedded screen included
Environment 18℃~ 26℃ (temperature) / 20% ~ 50% (humidity)
1. Product Spec
2. Consumables
[Special VAT] [RESIN] [LAMP]
4
Names of Parts
[Front] [Left side]
[Back]
UVLED engine
Tray
Fan
[Right side] 5
Power
button
Power
Switch
Equipment Operation Manual
UVLED 3D PRINTER
DT-110
How to Attach & Detach Tray
7
Tray
1. Since the tray is pressed down by spring devices, pull the tray out.
(Be careful when pulling out the tray as resin inside can overflow
and stain the equipment.)
2. Push in the reverse order to attach the tray.
The tray will make “clicking” sound with the spring devices.
(Be careful when pushing in the tray as resin inside can overflow
and stain the equipment.)
Spring devices
Spring devices
Indice
Altri manuali Carima Stampante 3D
