CBC ZN-B2MTP Manuale di istruzioni

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali CBC Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Quick User Guide ZN-BxMTP Network Camera

Ver1.00 EN

1

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet,

power off immediately.

-Do not place the Network camera near heat sources, such as a television or

oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No. Item Description

1 Network Camera ZN-BxMTP Series (ZN-B2MTP / ZN-B1MTP)

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Template for installation

Anchor : 4pcs

Tapping Screw 4x30 : 4pcs

Hexalobular L-key Wrench

Wrench bolt 3pcs

Video monitor cable

Power Jack Cable

Terminal Block (2pin/8pin)

Quick User Guide ZN-BxMTP Network Camera

Ver1.00 EN

2

2. Physical Description

1. Network (RJ-45 PoE supported)

2. Power connector (AC24V)

3. I/O signal terminal

Audio In (Line in)

Audio Out (Line Out)

Alarm In (Dry Contact)

Alarm Out (Relay out [0.5A:AC125V/1A DC30V])

4. Micro SD card (SDHC supported)

5. Control Button

6. Video output for service monitor/Status LED

3. Making Connection

1. If you have external devices such as sensor or alarms, make connection

from connectors.

2. Connect Ethernet cable to make connection to the network hub.

3. Connect power cable to the camera.

When you use PoE function, you don’t need to connect power.

Quick User Guide ZN-BxMTP Network Camera

Ver1.00 EN

3

4. Assign IP address

The default setting of the camera is set to “DHCP” and “UPnP” function

is set to ON. If you have a DHCP server on your network and UPnP

function is enabled on your PC you can find the network camera in

“My network”.

If a DHCP server is not available on your network, please assign IP

address by the following process. Default IP address will be shown as

255.255.255.255.

Execute MultiUpgradeTool.exe. It will search cameras on the network

automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Change IP address” button to apply settings to the camera.

When double click the camera in the list, the default web browser

(Internet Explorer or compatible equivalent) will open and automatically

connect to the camera.

①

③

②

Quick User Guide ZN-BxMTP Network Camera

Ver1.00 EN

4

5. Web browser connection

Note : The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”.

Please type in the user ID and password to connect the network camera.

For further information for setup, please refer to User’s manual

in software CD.