CBC ZN-MB2 Series Manuale di istruzioni
Quick User Guide ZN-MB2xx Series Network Camera
Ver1.20 EN
1
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet,
power off immediately.
-Do not place the Network camera near heat sources, such as a television or
oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to “User’s manual”.
1. Check Contents
No.
Item
Description
1
Network Camera
ZN-MB2xx Series
2
Software CD
User’s Manual, Utility software
3
Quick User Guide
This document
4
Accessories
Wall Bracket : 1pc
Tapping Screw M4x30 : 3pcs
Anchor : 3pcs
2. Physical Description
1. Network (RJ-45 PoE required)
2. Video output for service monitor
3. Control Button
Quick User Guide ZN-MB2xx Series Network Camera
Ver1.20 EN
2
3. Making Connection
Connect Ethernet cable to make a connection to the PoE HUB.
The camera support PoE only.
4. Assign IP address
The default setting of the camera is set to “DHCP”and “UPnP”function
is set to ON. If you have a DHCP server on your network and UPnP
function is enabled on your PC you can find the network camera in
“My network”.
If a DHCP server is not available on your network, please assign IP
address by the following process. Default IP address will be shown as
255.255.255.255.
Execute MultiUpgradeTool.exe. It will search cameras on the network
automatically.
1) After the camera is listed in camera list, select the camera.
2) Type in the all network information.
3) Click “Change IP address”button to apply settings to the camera.
When double click the camera in the list, the default web browser
(Internet Explorer or compatible equivalent) will open and automatically
connect to the camera.
①
③
②
Quick User Guide ZN-MB2xx Series Network Camera
Ver1.20 EN
3
5. Web browser connection
Note : The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an
Active X control from the camera to display a Live image.
Default User and Password are set to “ADMIN”and “1234”.
Please type in the user ID and password to connect the network camera.
For further information for setup, please refer to User’s manual
in software CD.
Indice
Altri manuali CBC Telecamera di sicurezza
CBC
CBC GANZ ZC-NH406PE Manuale utente
CBC
CBC ZN-D MTP Series Manuale di istruzioni
CBC
CBC CMC Series Manuale utente
CBC
CBC ZN-BxMTP Series Manuale di istruzioni
CBC
CBC ZN-MDI243M-IR Manuale di istruzioni
CBC
CBC CX Series Manuale utente
CBC
CBC GANZ Z8-VD2V-2 Manuale utente
CBC
CBC PT127N-XT Manuale utente
CBC
CBC AFZC-22X Manuale utente
CBC
CBC CL-301 Manuale utente
CBC
CBC PT110-IP Manuale utente
CBC
CBC ZC-D3024PHA Manuale utente
CBC
CBC PT118XT-HD Manuale utente
CBC
CBC ZC-PT212 Manuale utente
CBC
CBC ZC-F11C4 Manuale utente
CBC
CBC ZN-C Series Manuale di istruzioni
CBC
CBC PT127N Manuale utente
CBC
CBC LC703 Manuale utente
CBC
CBC ZN-M2AF Manuale di istruzioni
CBC
CBC PT110N Manuale utente
