CBN WR5842 Manuale utente
2
WPS
1 x LAN 1Gbps
1 x WAN
2.5Gbps
Reset
+12V DC
Power
Wireless LAN Wired Ethernet LAN
Ethernet cablePower Adapter
LAN OptionsLAN Options
1
WR5842
3
Inside the Box
One Power Adapter
110V
Power Connection
2 Plug the power Adapter into an +110V AC power outlet and DC plug in the other end of the power cord into
+12VDC inlet of WR5842.
Turn the switch ON( - ), Every time WR5842 is turned on, it takes about 2 minutes to find and lock the Mesh Wi-Fi.
4
Wireless Wi-Fi
Power port
Power
Adapter
+110V AC electrical outlet
3
5
Wireless LAN Connection For Configuration Manager AccessWireless LAN Connection For Configuration Manager Access
Check the WR5842 label to find out the basic setting of Wireless Wi-Fi SSID and password.
Check the WR5842 LED status.
The WR5842 front panel LED indicators provide the status
information for power, communications, and errors.
If WR5842 is power on and work function LED should be solid
white. (at start)
3
6
Go to the device you wish to connect. Open your device’s Wi-Fi settings (make sure Wi-Fi is turned on).
Refresh the "Network and Internet" window to select and connect to the WR5842 SSID name printed on the label.
Enter the password printed on the label and press "Next" for Wi-Fi connection.
You can access the WR5842 configuration manager through http://192.168.200.1.
Wireless LAN Connection For Configuration Manager Access
CBN-XXXX
CBN-XXXX
Wired Ethernet LAN Connection For Configuration Manager Access
4 User can easily connect any 10/100/1000 Mbps/ 2.5GbE (WAN/LAN selectable) Ethernet connection directly to
the WR5842 Ethernet LAN port to access the configuration manager through http://192.168.200.1
7
Ethernet cable
2.5GbE LAN1
10/100/1000GbE LAN2
5 The WR5842 Configuration Manager (CMGR) allows you to change and view the settings of your WR5842.
You can reach the configuration manager at http://192.168.200.1 to login CMGR, you should key in the correct
Password provided in Unit label.
8
WR5842 Configuration Manager (CMGR)
Complete WR5842 Configuration Manager (CMGR)
6 After logging into the management system, CMGR allows you to change and view the settings on your WR5842.
Congratulations! Your wireless access point has been set up.
If you have any problem, please follow the troubleshooting instructions to troubleshoot.
If your Wi-Fi is already connected to the network or device but still can’t connect or access to the internet,
please check your PC or device IP address setting to allow your PC or device to get IP automatically through
DHCP.
9
7
Mesh setting
Cable modem
10
Wireless Wi-Fi (1)
First make sure your cable modem is able to connect to the internet, press the cable modem and
WR5842 WPS button at the same time, wait for 5-10 second to complete the Mesh network setting.
If LED is solid green light, this means WR5842 is scanning and trying to connect to the Mesh network.
WPS
If you need to set up more Mesh networks, please press WPS button at the wireless Wi-Fi(1) that
has already been connected to cable modem and then press the WPS button on the new wireless
Wi-Fi(2) your going to set up. Wait for 5-10 second to complete the Mesh network setting.
WPS
Wireless Wi-Fi (2)
WPS
Indice
Altri manuali CBN Punto di accesso wireless
