CBN WR5881 Manuale utente
1
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
WR5881
Wireless Access Point Quick Installation Guide
Release 1.0
Aug/2021
2
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
Welcome
Thank you for choosing the CBN WR5881 whole home MESH Wi-Fi solution.
The mesh Wi-Fi can be used to expand coverage of your existing CBN Wireless Network and
without dead zone. This Quick Start Guide will get you up and running in no time.
Getting Started
Inside the Box
Before you install the WR5881 Wireless Gateway, verify that the following items are included in
the box with the WR5881:
Item
Description
Device
WR5881 device
Power Adapter
Connect the WR5881 to an
AC electrical outlet
Ethernet Cable RJ 45
Connect the WR5881 to PC
or Notebook
You must have the latest service packs and patches installed on your computer for your
operating system.
格式化:字型: (英文)Calibri, 11 點
格式化:字型: (英文)Calibri, 16 點, 粗體
格式化:字型: (英文)Calibri, 11 點
格式化:字型: 11 點
3
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
Wireless Access Point Overview
Front Panel
The WR5881 front panel contains indicator light.
格式化:置中
格式化:字型: 11 點
4
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
LED descriptions
The WR5881 front panel LED indicators to provide the following status information for power,
communications, Wi-FI, MESH and errors. This device consists of multiple leds which shows the
status of all functions.
When devices in CAP mode
Icon
Name
Status Behavior
Power
OFF: Power off
GREEN SOLID: Power on
FLASHING: WPS Key 10 sec, enable MESH connection process until LED turn into
SOLID mean ready
WAN
Connection
OFF: No WAN connection
GREEN SOLID: WAN available ready
FLASHING: Packet traffic
Wi-FI
Connection
OFF: Wi-Fi off
GREEN SOLID: 2.4Ghz only enable
BLUE SOLID: 2.4Ghz & 5GHz or 5GHz only enable
FLASHING: WPS key 1 sec to start paring process will flash for 2min.
MESH
OFF: MESH disabled
GREEN: MESH enable no RE connection
BLUE: RE connected
When devices in RE mode
Icon
Name
Status Behavior
Power
OFF: Power off
GREEN SOLID: Power on
FLASHING: WPS Key 10 sec, enable MESH connection process until LED turn into
SOLID mean ready
WAN
Connection
OFF: No WAN connection
GREEN SOLID: WAN available ready
FLASHING: Packet traffic
Wi-FI
Connection
OFF: Wi-Fi off
GREEN SOLID: 2.4Ghz only enable
BLUE SOLID: 2.4Ghz & 5GHz or 5GHz only enable
FLASHING: WPS key 1 sec to start paring process will flash for 2min.
MESH
OFF: MESH disabled
GREEN: MESH enable no RE connection and MESH measuring:
Measuring stats:
YELLOW: Too close to the CAP
RED: Too far from the CAP
BLUE: Good location spot
格式化:字型: 11 點
格式化:字型: 11 點
5
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
Rear Panel
The WR5881 rear panel contains of LAN Ports, WAN Port, reset button, Power button, Power
port and WPS Button on top.
The WR5881 (shown above) rear panel contains the following cabling port and connectors:
Item
Description
Power port
Plugged into the AC adapter and wall outlet.
Power Button
ON/OFF WR5881 device
Reset
Press and hold the RESET button for five seconds or longer to restore
WR5881 to factory default settings. After factory reset default settings are
restored, the gateway will restart and may take 5 to 30 minutes to find and
lock on the appropriate communication channels.
Ethernet
(LAN/WAN)
Use any Ethernet port to connect an Ethernet-equipped computer, hub,
bridge, or switch using an RJ-45 cable.
格式化:左右對齊, 行距: 多行 1.15 li
格式化:字型: 11 點
格式化:靠左
6
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
WPS Button (Top)
To use WPS feature press WPS button to start WPS directly
格式化:靠左
7
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
Chassis Label
The WR5881 Chassis label is located on the bottom of the WR5881 devices. The label contains
Web GUI login information and your Wi-Fi network name and password
Connect Power Supply
Plug the power cord into an AC wall outlet and the other end of the power cord into the power
port of WR5881. WR5881 will power on automatically and complete the boot up process in
about 3 minutes. Please check the LED status when powering on. An unblinking white LED
Configuration Manager
(CMGR) Login IP address
User name & Password
Wireless LAN
connection SSID &
Password
格式化:字型: (英文)Calibri
8
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
indicates that the startup process has been successfully completed.
Wireless LAN Connection
Go to the device you wish to connect. Open your device’s Wi-Fi settings (make sure Wi-Fi is
turned on). Refresh the "Network and Internet" window to select and connect to the WR5881
SSID name printed on the bottom label.
Enter the password printed on the bottom label and press "Next" for Wireless LAN connection.
9
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
Wired Ethernet LAN Connection
Users can easily connect any PC RJ45 Ethernet port directly to the WR5881 Ethernet port to
establish a wired Ethernet LAN connection.
WR5881 Configuration Manager (CMGR) Login
The WR5881 Configuration Manager (CMGR) allows you to change and view the settings on your
WR5881. You can reach the configuration manager at http://192.168.1.1
To login CMGR, you should key in the correct Password provided in MAC label.
10
Copyright © 2021 Compal Broadband Networks, Inc. Confidential and Proprietary
After login your CGMR looks like the below,it consists of Quick setup Wizard, Language,
Operation Mode for Advanced settings. For more details refer user manual.
If WR5881 cannot work normally, please follow the Troubleshooting Guidelines for
troubleshooting.
MESH network mode to Router or Bridge:
When in Configuration Manager (CMGR) and you can change the MESH Mode: Menu > Wi-Fi
Setting > Mesh Wi-Fi
MESH mode:
1. Auto Detect: WR5881 will auto detect itself if its CAP or RE mode
2. Router Mode: Set WR5881 being the Router Control Access Point (CAP) of the Mesh network.
3. Bridge Mode: Set WR5881 being the Bridge Control Access Point (CAP) of the Mesh network.
4. Ranger Extender: Set WR5881 being the Range Extender (RE) of the Mesh network.
Indice
Altri manuali CBN Punto di accesso wireless
