CDA HC7600 Scheda tecnica
www.cda.eu
HC7600
Ceramic hob
Installation, use and maintenance
2
Contents:
3 Important
5 Important information
6 Using your hob
8 Operating time limiter
8 Dual zone function
9 Extendable zone function
9 Timer
11 Safety key lock
11 Residual heat indicators
12 Ecient use of your hob
13 Care and maintenance
14 Cleaning guide
15 Troubleshooting
17 - 20 Installation
17 Installation - preparation
19 How to install the hob
21 Mains electrical connection
23 Energy eciency information
3
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance
or use in a commercial environment.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
EU Declarations of Conformity
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety
(LVD) 2014/35/EU and Electromagnetic interference compatibility
4
(EMC) 2014/30/EU. Parts intended to come into contact with food
conform to 1935/2004/EC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
Please note:
•Ceramic hobs become hot and remain hot during and immediately
after use. Do not touch the hob until it has been allowed to cool.
•Keep children away from the appliance when in use.
•Never use the hob top for storage.
•Pan handles should never stand out beyond the edge of the
worktop. This will help to avoid children reaching them.
•Do not lean over the hob when it is in use.
•Follow the cleaning instructions carefully.
•Ensure the base of the saucepan is clean and dry before placing it
on the hob.
•Avoid hard shocks from cookware – the vitroceramic glass surface
is highly resistant but not unbreakable.
5
•Do not place hot lids flat on the hob top. A “suction” eect could
cause damage to the hob.
•Do not drag cookware across the hob top: in the long term, this
could cause damage to the hob.
•Do not store cleaning or flammable products in the unit below the
hob.
•Always use appropriate cookware.
•Do not cook unopened tins of food directly on the hob.
•Never put cooking foil or plastic materials on the ceramic surface
when the hob is hot. These materials could melt and cause
damage to the hob.
•This hob (Class 3) has been designed for use only as a cooking
appliance. Any other use should be considered incorrect and
therefore dangerous.
Important
•Do not use the hob if the glass surface is cracked or damaged to
prevent the risk of electric shock. Disconnect it from the power
supply.
•Ensure that the power cable of a connected electrical appliance
near the hob is not in contact with the cooking zones.
Please note:
•When connecting the hob to the power and switching it on for the
first time the cooking zone displays may show the letter " ". This is
not a fault and the letter " " should disappear after approximately
one hour. Please see page 11 - 12 for more information.
•The safety key lock may be active. Simply press and hold the
safety key lock sensor for 2 - 3 seconds to deactivate it.
6
Using your hob
Zones:
1. Front left 1/2.2kW Ø140/210mm 2. Back left 1.8kW Ø180 mm
3. Back right 1.4/2.2kW Ø170-265mm 4. Front right 1.2kW Ø145 mm
Control panel:
1. Zone minus sensor 5. Timer minus sensor
2. Zone plus sensor 6. Timer plus sensor
3. Dual zone sensor 7. Lock sensor
4. On/o sensor 8. Extendable zone sensor
To switch the hob on (and o)
•You may need to unlock the control panel, as per page 7. To switch
the hob on, touch and hold the on/o sensor for approximately
two seconds. The hob will beep and all indicators should show ‘0’.
Touch and hold the same sensor to switch the hob o.
Fig. 1
1
23
4
Fig. 2
14
2 6
35
1 1 1
222
78
7
Please note: If a power level is not set within approximately ten
seconds, the hob will switch o automatically.
After switching the mains supply on to the hob, or if the mains
supply is interrupted and then restored, the safety key lock may
be active. The safety key lock LED will be on to indicate this. Simply
press and hold the lock sensor for approximately two seconds to
deactivate the safety key lock and proceed to use the hob as normal.
To set the power level
•After switching the hob on, simply select the desired heat setting
using the or selectors for that zone. The power level
ranges from 1 (minimum) to 9 (maximum). The hob will then begin
heating. You can also press the selector first to jump straight
to power level 9.
To turn the power o to a zone
•To switch o a zone you can use the zone's selector to return
the heat setting to 0 or alternatively you can press both the
and selectors simultaneously for that zone. The cooking zone
indicator will display a '0' to confirm that the zone is now inactive.
•If switching o multiple zones, the above steps need to be taken
for each zone. When all the zones are at '0', the hob will switch o
automatically after approximately ten seconds.
•Alternatively, to switch o the hob immediately, touch and hold the
on/o sensor for approximately two seconds.
Please note: Any zones that are still hot to the touch should display
an " " provided the mains power supply is not interrupted.
8
Operating time limiter
Each zone has an operating time limiter to increase overall eciency
and to prevent the hob from being left on indefinitely. If a zone's heat
setting is not changed for a specific duration then the associated zone
is automatically switched o and residual heat indicator activated.
Zones can still be used as normal in accordance with the operating
instructions. The operating time limiter is set according to the last
selected heat setting. The maximum operating times for each setting
can be found below.
Dual zone function
The front left zone is equipped with a dual zone function that allows
you to extend the heating area for the zone. In normal use, the zone
functions with just the smaller inner ring until the dual zone function is
activated.
To activate the dual zone function
• Simply set a power level on the front left zone and then press the
dual zone sensor once to activate the outer zone. An LED
above the dual zone sensor will illuminate accordingly.
10
1
Zone Power Level
Maximum
Operating Time
(hours)
234 5 6 7 8 9
5 5 4 3 2 2 2 1
9
To deactivate the dual zone function
• Simply press the dual zone sensor . The LED indicator should
extinguish and the zone will return to operating on the inner zone
only.
Extendable zone function
The rear right zone is equipped with an extendable zone function that
allows you to extend the heating area for the zone. In normal use, the
zone functions with just the leftmost circular ring until the extendable
zone function is activated.
To activate the extendable zone function
• Simply set a power level on the rear right zone and then press
the extendable zone sensor once to activate the extended
zone. An LED above the extendable zone sensor will illuminate
accordingly.
To deactivate the extendable zone function
• Simply press the extendable zone sensor . The LED indicator
should extinguish and the zone will return to operating on the
leftmost part of the zone only.
Timer
The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between a minimum of 1 minute and
a maximum of 99 minutes. This timer can only be used on one zone at
a time. Once the timer is set, the timer display will show the time
10
remaining. In normal use, the timer ending prompts the zone heating
to end as well.
To set the timer
•First, switch on the hob if necessary and set the zone you’d like
to be timed to the required power level. Next, touch either of the
timer sensors ( or ). This will activate the timer. A decimal
point (LED indicator) should appear next to the timer display.
•Finally, set the number of minutes on the timer using the timer
or sensors. A maximum of 99 minutes can be set.
•Once the time has elapsed the hob will emit an acoustic signal and
the zone will cease operation. To cancel the acoustic signal simply
press any sensor field.
To cancel the timer
• Simply touch the timed zone’s plus or minus sensor to activate
zone adjustment and then either press the timer plus and minus
sensors simultaneously ( and ) or use the timer minus
sensor to return the number of minutes to ‘0’. The timer will then
be cancelled.
Please note: Activating the timer with the timer minus sensor
will automatically take you to the 99 minute limit of the timer. This is
useful if you wish to set a large number of minutes (e.g. 90) but you
cannot go back to 0 without cycling down through all of the minutes
or turning the hob o and then on again.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali CDA Piano cottura
CDA
CDA CERAMIC HOBS HVC65 Manuale di riferimento
CDA
CDA HC6212FR Guida rapida
CDA
CDA HN3621FR Guida rapida
CDA
CDA hc9620 Manuale di riferimento
CDA
CDA HN6732FR Guida rapida
CDA
CDA HVG970 Scheda tecnica
CDA
CDA HVC70 Manuale di riferimento
CDA
CDA HN9850FR Istruzioni per l'installazione e il funzionamento
CDA
CDA HN9841FR Guida rapida
CDA
CDA HCC762 Manuale di riferimento
CDA
CDA hn6410 Manuale di riferimento
CDA
CDA HN6111 Manuale utente
CDA
CDA HCN510 Manuale di riferimento
CDA
CDA 4Q4 Manuale di riferimento
CDA
CDA hc7620 Manuale di riferimento
CDA
CDA HC6211FR Guida rapida
CDA
CDA HCG602 Manuale di riferimento
CDA
CDA HN6860FR Scheda tecnica
CDA
CDA hn9840 Manuale di riferimento
CDA
CDA HE6051FR Guida rapida
