CDA Matrix MHN101FR Manuale utente

Induction Hob

Manual for installation,

use and maintenance

MHN101FR

parts +1 year labour

year

guarantee

www.matrixappliances.co.uk

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that CDA reserve the right to invalidate the guarantee supplied with

this product following incorrect installation or misuse of the appliance

or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault

with your appliance and to register your appliance for guarantee

purposes.

Appliance Model

Serial Number

EU Declarations of Conformity

This appliance has been manufactured to the strictest standards

and complies with all applicable legislation, including Electrical safety

(LVD) 2014/35/EU and Electromagnetic interference (EMC) 2014/30/EU.

Parts intended to come into contact with food conform to 1935/2004/

EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both

energy and resources. As a reminder of the need to dispose of

household appliances separately, the product is marked with a

crossed-out wheeled dustbin.

Please note:

• Induction hobs become hot and remain hot during and immediately

after use. Do not touch the hob until it has been allowed to cool.

• Keep children away from the appliance when in use.

• Never use the hob top for storage.

• Pan handles should never stand out beyond the edge of the

worktop. This will help to avoid children reaching them.

• Do not lean over the hob when it is in use.

• Follow the cleaning instructions carefully.

• Ensure the base of the saucepan is clean and dry before placing

it on the hob.

• Avoid hard shocks from cookware – the vitroceramic glass surface

is highly resistant but not unbreakable.

• Do not place hot lids flat on the hob top. A “suction” effect could

cause damage to the hob.

• Do not drag cookware across the hob top: in the long term, this

could cause damage to the hob.

• Do not store cleaning or flammable products in the unit below the

hob.

• Always use appropriate cookware.

• Do not cook unopened tins of food directly on the hob.

• Never put cooking foil or plastic materials on the ceramic surface

when the hob is hot. These materials could melt and cause

damage to the hob.

• This hob (Class 3) has been designed for use only as a cooking

appliance. Any other use should be considered incorrect and

therefore dangerous.

FOR THOSE WITH HEART PACEMAKERS OR ACTIVE IMPLANTS:

The function of this hob conforms to current electromagnetic

interference standards and thus is in total compliance with legal

requirements (2004/108/CE directives).

To avoid interference between your hob and a pacemaker, your

pacemaker must be designed and programmed in compliance with

the regulations that apply to it. As such, CDA guarantee only that our

product is compliant.

With regard to the compliance of the pacemaker or any potential

incompatibility, you should obtain information from the manufacturer

or your attending physician.

Important

• Do not use the hob if the glass surface is cracked or damaged

to prevent the risk of electric shock. Disconnect it from the power

supply.

• Ensure that the power cable of a connected electrical appliance

near the hob is not in contact with the cooking zones.

Cooking on Induction

The principle of induction cooking is based on magnetic effect.

When you put your cookware on an induction zone and switch it on,

the electronic boards in the hob produce induced currents in the

base of the cookware and instantly raise its temperature. This heat is

then transferred to the food inside the cookware.

The best cookware to use with induction cooking has thick flat

bases, as the heat will be better distributed meaning cooking is more

even.

Most cookware is compatible with induction cooking.

There are three ways to check the suitability of your cookware:

1. Using a magnet to see if the base of the pan is magnetic: If the

magnet sticks, then the cookware is compatible.

2. Place the pan on one of the cooking zones and switch the

zone on. If the display continues to show the selected power

level then the cookware is compatible. If the display shows “ ”, the

cookware cannot be used on an induction hob.

3. Check the instructions or packaging of the pans for the symbols

indicating suitability for use with induction.

Using your hob

Zones:

1. Front left 2 - 3kW 220 mm

2. Back left 1.2 - 1.4kW 180 mm

3. Back right 2 - 3kW 220 mm

4. Front right 1.2 - 1.4kW 180 mm

Control panel:

5. On/off sensor 10. Timer sensor

6. Higher heat setting selector 11. Safety key lock sensor

7. Cooking zone indicator 12. Timer indicator light

8. Lower heat setting selector 13. Safety key lock indicator light

9. Cooking zone selector(s) 14. Timer display

11 9 9 5

68 10

12 12

13 7 7

fig. 2

fig. 1

Using your hob

To switch the hob on

• To switch the power on, touch and hold the "On/off sensor" (5)

for approximately two seconds. The hob will beep and all four

cooking zone indicators will show “0”.

Please note: If a zone is not selected nor a power level set within ten

seconds, the hob will switch off automatically.

To set the power level

• Touch the cooking zone selector (9) for the required zone. The

hob will beep and the zone display will show a pulsating "0" on the

selected zone's indicator.

• Select the desired heat setting using the "+" or "-" selectors. The

power level ranges from 1 (minimum) to 9 (maximum). The hob will

begin heating and the cooking zone indicator will pulsate for

approximately ten seconds before remaining solidly lit. Inactive

cooking zones' indicators will dim at this point.

• This hob also has a "Keep warm" function as well as a "Booster"

function. The "Keep warm" function is available between "0" and

"1" heat settings and is shown on a cooking zone indicator as " ".

The Booster function is available after heat setting "9" and is

shown on a cooking zone indicator as "P".

Please note: After zone selection, the zone will remain active for

approximately ten seconds. If no key is touched during this time, the

zone will become inactive and the hob will switch off automatically.

To turn the power off to a zone

• To switch off a zone, touch the cooking zone selector (9) so that

the cooking zone indicator (7) pulsates. Then press and hold the

cooking zone selector (9) for approximately three seconds. The

cooking zone indicator will display a "0" to confirm that the zone is

now inactive but will display an " " or " " if the zone is still hot to the

touch.

• If switching off multiple zones, the above step needs to be taken

for each zone. When all the zones are at "0", the hob will switch off

automatically after approximately ten seconds.

• Alternatively, to switch off the hob immediately, touch and hold the

"On/off sensor" (5) for approximately two seconds. Any zones

that are still hot to the touch will display an " " or " ".

Booster function

• The hob is equipped with a booster function on all zones, allowing

a higher power level than the maximum for approximately ten

minutes. To turn on the booster function, touch the cooking zone

selector (9) for the desired zone, set the heat setting to "9" using the

"+" sensor (6) and then touch the "+" sensor (6) once more. "P" will

show in the cooking zone indicator to show that the booster is on.

• The booster function automatically deactivates after 10 minutes of

usage. The cooking zone will continue to operate at its nominal

power at this point. The booster can be reactivated after this time

provided the hob's internal components have not overheated.

• To cancel the booster at any time, select the cooking zone using

the cooking zone selector (9) and lower the heat setting using the

"-" sensor (8).

Please note: The booster function cannot be used on two vertically

arranged cooking zones at the same time. This is to prevent damage

to the internal modules caused by overheating.

If the appliance's electronic circuits or induction coils overheat

whilst the booster function is in operation then the function will be

automatically deactivated and the zone will continue to operate at

its nominal power. The booster function will be available again once

the internal components have been cooled sufficiently.

It is normal for a high pitched whirring noise to begin whilst the

booster function is in use. This is the cooling fan inside the hob

keeping the internal components as cool as possible.

If a pot is removed from the cooking zone whilst the booster function

is in use, the function remains active and the ten minute countdown

continues.

Operating time limiter

In addition to the booster deactivation timer, each zone has an

operating time limiter to increase overall efficiency and to prevent

the hob from being left on indefinitely. If a zone's heat setting is

not changed for a specific duration then the associated zone is

automatically switched off and residual heat indicator activated.

Zones can still be used as normal in accordance with the operating

instructions. The operating time limiter is set according to the last

selected heat setting. The maximum operating times for each setting

can be found on page 11.

Indice

Altri manuali CDA Piano cottura

CDA

CDA HC6211FR Guida rapida

CDA

CDA hn9610 Manuale di riferimento

CDA

CDA CERAMIC HOBS HVC65 Istruzioni per l’uso

CDA

CDA HN6412FR Guida rapida

CDA

CDA PEB4.7SVR Manuale utente

CDA

CDA HCC570 for Manuale di riferimento

CDA

CDA HC6312FR Guida rapida

CDA

CDA 4Q4 Manuale di riferimento

CDA

CDA HCG 730 Users operating instructions Guida del prodotto

CDA

CDA HN9850FR Istruzioni per l'installazione e il funzionamento

CDA

CDA hc3620 Manuale di riferimento

CDA

CDA HN9841FR Guida rapida

CDA

CDA MATRIX MHC101FR Manuale di riferimento

CDA

CDA HNG7410FR Guida rapida

CDA

CDA HVG970 Scheda tecnica

CDA

CDA hg6300 Manuale di riferimento

CDA

CDA HN6111 Manuale utente

CDA

CDA hc3615 Guida rapida

CDA

CDA hn6110 Manuale di riferimento

CDA

CDA HCG 931 for Manuale di riferimento

CDA

CDA HC9621FR Guida rapida

CDA

CDA hn9625 Manuale di riferimento

CDA

CDA HVC93 Manuale di riferimento

CDA

CDA HC9606FR Scheda tecnica

Manuali Piano cottura popolari di altre marche

Siemens

Siemens EX875KYV1E Scheda tecnica

AEG

AEG CERAMIC HOB 6010 K Manuale utente

VALERA

VALERA CT 70A Manuale utente

Zanussi

Zanussi ZGF 6420 Manuale utente

Gaggenau

Gaggenau CI 273 Manuale utente

G3 Ferrari

G3 Ferrari Energy Manuale utente

Pkm

Pkm IN4B Manuale utente

Award

Award H903BG Manuale utente

Zanussi

Zanussi VCH 5005 RZ Manuale utente

Miele

Miele KM 523 Manuale utente

Hotpoint

Hotpoint IS67V8CCXT/E Manuale utente

AEG

AEG HK854870XB Manuale utente

Cookology

Cookology SEP600BK Manuale utente

Bauknecht

Bauknecht Hob Manuale utente

Zanussi

Zanussi ZGM 782 Manuale utente

dipo INDUCTION

dipo INDUCTION DIBK218S Manuale utente

Miele

Miele KM 5987 Manuale utente

Miele

Miele KM 360 G Manuale utente