LiPo LiFe Battery Management System BMS16Pro V1.0
www.chargery.com
page 2 total 13
Chargery BMS16Pro is designed special for LiPo LiFe battery pack applied to storage energy system and
Electrical Vehicle including E-Motorcycle, E-Scooter and so on. The unit can measure or detect the battery voltage,
cell voltage, charge discharge current, battery temperature, and battery SOC (State of Charge) , displayed with
TFT color LCD.
Safety Notes
Please read the entire manual completely before using, to make sure you can use this device better and more
safely.
1. Ensure the BMS program and settings match the battery pack, otherwise the battery will be damaged and a
dangerous situation may arise, especially for Lithium batteries, which may cause fire.
2. For storage energy system application and for Electrical vehicle application will have many differences,
please adjust those key parameters carefully, or contact us for more details.
3. Do not allow water, moisture, metal wires or other conductive material into the device.
4. Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged outer cover
or case, color-change or distortion.
5. Do not try to charge “non-rechargeable” dry cells.
6. Do not mix batteries of different types, different capacities or from different manufacturers.
7. Do not exceed the battery manufacturer’s suggested maximum charge and discharge rates.
8. Carefully follow the battery pack manufacturer’s recommendations and safety advice.
Copyright
Copyright@ Chargery Power Co. Ltd. All rights reserved.
Without prior written consent by Shenzhen Chargery Power Co., Ltd, any units or individual extract and copy
parts or entire contents of this manual, and transmission in any form is illegal and strictly prohibited.
The product described in this manual, may include copyright software ownership belonged to Shenzhen Chargery
Power Co., Ltd and its licensee, except getting the permission from relevant rights holders, otherwise any copy,
distribute, modify, excerpt, decompile, disassemble, decrypt, reverse engineering, lease, transfer, sub-license,
as well as other acts of infringement of software copyright is strictly prohibited, but apart from the restrictions
prohibited by applicable law.
Special Features
1. The BMS16Pro uses advanced ADC measurement technology, high accuracy, high voltage and high current
detection circuit. The maximum voltage measurements tolerance is within 5mV at up to 16S LiPo battery
69V)
2. Charge/discharge current up to 300A. Bigger current can be customized.
3. 1.2A per cell balance current is very useful for large capacity battery pack, the feature can resume all cell
voltage balance status at the shortest time. over temperature protection make sure the system safety
during balance.
4. BMS16Pro calculate and display the charge and discharge power (Wh), generally the battery rated power is
rated voltage multiply rated battery capacity.
5. TFT LCD screen provides rich information including current, voltage, power, capacity, battery status, SOC
and temperature and so on.
6. BMS16Pro features a maximal safety protection, within the range parameters can be setup, BMS16Pro will
alarm and cutoff charge or discharge according to users’ setup, out of range of parameters, and trigged
absolute maximum ratings BMS16Pro will force to cutoff charge or discharge to prevent the battery from fire.
7. Minimize the power consumption by draw current from all cells or external power supply.
