4
Intelect®Advanced Laser Module
CAUTIONCAUTION
• Use of parts or materials other than Chattanooga's can
degrade minimum safety.
• DO NOT disassemble, modify, or remodel the unit or
accessories. This may cause unit damage, malfunction,
electrical shock, fire, or personal injury.
• Failure to use and maintain the Intelect Advanced Laser and
its accessories in accordance with the instructions outlined in
this manual will invalidate your warranty.
• DO NOT remove the cover. This may cause unit damage,
malfunction, electrical shock, fire, or personal injury. There
are no user-serviceable parts inside the unit. If a malfunction
occurs, discontinue use immediately and consult the dealer
for repair service.
• DO NOT permit any foreign materials or liquids to enter the
unit. Take care to prevent any foreign materials including, but
not limited to, inflammables, water, and metallic objects from
entering the unit. These may cause unit damage, malfunction,
electrical shock, fire, or personal injury.
• If you have difficulty operating the unit after carefully
reviewing this users manual, contact your DJO dealer for
assistance.
• This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to other
devices in the vicinity. However, there is no guarantee that
interference will not occur in a particular installation. Harmful
interference to other devices can be determined by turning
this equipment on and off, try to correct the interference
using one or more of the following: Reorient or relocate
• Before each use, clean the plastic lens with NOVUS® Polish
System. Contact Novus at: www.novuspolish.com. Apply
with a clean cloth. Failure to clean the lens between patient
therapy sessions could cause beam fragmentation, which may
result in serious injury and equipment damage.
• Be sure to read all instructions for operation before treating a
patient.
• DO NOT drop the applicator or module on hard surfaces. Do
not cool an overheated applicator with ice water or ice packs.
Do not allow the applicator to reach maximum temperatures
repeatedly. Do not submerge the applicator or module in
water. All of these conditions will damage the applicator
and module. Damage resulting from these conditions is not
covered under the warranty.
• Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
exposure to laser energy.
• Make certain that the unit is electrically grounded by
connecting only to a grounded electrical service receptacle
conforming to the applicable national and local electrical codes.
the receiving device, increase the separation between the
equipment, connect the equipment to an outlet on a different
circuit from that to which the other device(s) are connected
and/or consult the factory field service technician for help.
ABOUT LASER THERAPY
