Chauvin Arnoux AEMC Instruments 6418 Manuale utente

Clamp-On Ground Tester

Model 6418

Quick Start Guide

ENGLISH

www.aemc.com

Thank you for purchasing the AEMC Clamp-On Ground Tester Model 6418.

For best results from your instrument and for your safety, read the enclosed operating

instructions carefully and comply with the precautions for use. These products must be

only used by qualified and trained users.

WARNING, risk of DANGER! The operator must refer to these

instructions whenever this danger symbol appears.

Equipment is protected by double insulation.

Battery.

Application or withdrawal authorized on conductors carrying

dangerous voltages. Type A current sensor per IEC 61010-2-032.

Useful information or hint to read.

The product has been declared recyclable after analysis of its life

cycle in accordance with the ISO14040 standard.

Guarantees conformity with European directives and with regulations

covering EMC.

In the European Union, the product must undergo selective disposal

for the recycling of electric and electronic material, in compliance

with Directive WEEE 2002/96/EC.

Precautions

This instrument is compliant with safety standard IEC 61010-2-032, for voltages up to

100V in category IV or 150V in category III.

Failure to observe the safety instructions may result in electric shock, fire, explosion, and

destruction of the instrument and of the installations.

The operator and/or the responsible authority must carefully read and clearly

understand the various precautions to be taken in use. The operator and/or the

responsible authority must carefully read and clearly understand the various

precautions to be taken in use. Sound knowledge and a keen awareness of

electrical hazards are essential when using this instrument.

If you use this instrument other than as specified, the protection it provides may

be compromised, thereby endangering you.

The safety of any system in which this instrument might be incorporated is the

responsibility of the integrator of the system.

Do not use the clamp above its rated frequency, since this might cause it to

overheat dangerously.

Do not use the instrument on networks of which the voltage or category exceeds

those mentioned.

Observe the environmental conditions of use.

Do not use the instrument if it seems to be damaged, incomplete, or poorly

closed.

Before each use, check the condition of the insulation on the housing. Any item

of which the insulation is deteriorated (even partially) must be set aside for repair

or scrapping.

Before using your instrument, check that it is perfectly dry. If it is wet, it must be

thoroughly dried before it can be connected or used.

When handling the instrument, keep your fingers behind the physical guard.

Avoid impacts on the measurement head, in particular the air gap.

Keep the surfaces of the air gap clean; even a little dirt can cause the clamp to

malfunction.

Use personal protection equipment systematically.

All troubleshooting and metrological checks must be done by competent

accredited personnel.

INITIAL SETUP

Installing Batteries

Date/Time Setup

SELF-CALIBRATION

GROUND MEASUREMENT

CURRENT MEASUREMENT

Repair and Calibration

To ensure that your instrument meets factory specifications, we recommend that it be

scheduled to be sent back to our factory Service Center at one-year intervals for

recalibration, or as required by other standards or internal procedures.

For instrument repair and calibration:

You must contact our Service Center for a Customer Service Authorization Number

(CSA#). This will ensure that when your instrument arrives, it will be tracked and

processed promptly. Please write the CSA# on the outside of the shipping container. If

the instrument is returned for calibration, we need to know if you want a standard

calibration or a calibration traceable to N.I.S.T. (Includes calibration certificate plus

recorded calibration data).

For North / Central / South America, Australia and New Zealand

Ship To: Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

15 Faraday Drive • Dover, NH 03820 USA

Phone: (800) 945-2362 (Ext. 360)

(603) 749-6434 (Ext. 360)

Fax: (603) 742-2346 • (603) 749-6309

E-mail: repair@aemc.com

(Or contact your authorized distributor.)

Costs for repair, standard calibration, and calibration traceable to N.I.S.T. are available.

NOTE: You must obtain a CSA# before returning any instrument.

Technical and Sales Assistance

If you are experiencing any technical problems, or require any assistance with the

proper operation or application of your instrument, please call, fax, or e-mail our

technical support team:

Contact: Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

Phone: (800) 945-2362 (Ext. 351) • (603) 749-6434 (Ext. 351)

Fax: (603) 742-2346

E-mail: techsupport@aemc.com

04/19

99-MAN100493v2

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments

15 Faraday Drive • Dover, NH 03820 USA

Phone: (603) 749-6434 • Fax: (603) 742-2346

www.aemc.com

Indice

Altri manuali Chauvin Arnoux Apparecchiature di prova

Chauvin Arnoux

Chauvin Arnoux CDA 103 Manuale utente

Chauvin Arnoux

Chauvin Arnoux Metrix DOX2025B Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6422 Manuale utente

Chauvin Arnoux

Chauvin Arnoux MTX 3290 Manuale utente

Chauvin Arnoux

Chauvin Arnoux 10141 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6422 Manuale utente

Chauvin Arnoux

Chauvin Arnoux AEMC Instruments 6470-B Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 1631 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6470 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6131 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6423 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6422 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6121 Manuale utente

Chauvin Arnoux

Chauvin Arnoux TERCA 3 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 8220 Manuale utente

Chauvin Arnoux

Chauvin Arnoux MH 60 Manuale utente

Chauvin Arnoux

Chauvin Arnoux F 1N Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6549 Manuale utente

Chauvin Arnoux

Chauvin Arnoux CA 6651 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 6030 Manuale utente

Chauvin Arnoux

Chauvin Arnoux Multimetrix XDO2025 Manuale utente

Chauvin Arnoux

Chauvin Arnoux CDA 50 Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 10001 Manuale utente

Chauvin Arnoux

Chauvin Arnoux CA 10002 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente