TO ATTACH THE FRONT CHILD TRAY:
INSERT THE TRAY CLI P INTO THE FITTING ON THE STROLLER'S
FOLD JOINT. CHECK THE TRAY CLIP LOCKS INTO PLACE.
(FIGURE 1) PUSH THE ANGLED TRAY ONTO THE POST AT
THE END OF THE RIGHT ARMREST, WHIL E PRESSING
DOWNWARD ON THE SNAP BUTTON, UNTIL LOCKED INTO
PLACE. ROTATE THE TRAY DOWNWARD UNTIL LATCHED
ONTO THE LEFT ARMREST. PLEASE CHECK THAT THE SNAP
BUTTON COMES THROUGH AND SECURELY LATCHES THE
TRAY IN PLACE (FIGURE 2)
1
2
8.
9. FOLDING THE STROLLER
CLOSE THE CANOPY AS DESCRIBED IN THE CANOPY SECTION.
RECLINE SEAT BY RELEASING BUCKLE AS DESCRIBED IN
SEATBACK POSITIONING SECTION. THE STROLLER IS FOLDED
BY SIMULTANEOUSLY PULLING EACH TRIGGER FOLD. WHEN
THE FOLD LATCHES ARE RELEASED, THE HANDLE WILL BEGIN
TO FALL TOWARD THE FLOOR. RELEASE THE FOLD BUTTONS
AND PRESS DOWNWARD ON THE STROLLER HANDLE UNTIL
THE STROLLER IN THE FOLDED POSITION BY HOOKING THE
LATCH, LOCATED ON THE RIGHT SIDE OF THE STROLLER, OVER
THE RIVET THAT PROTUDES FROM THE FRAME.
2
1
4
3
