CILICO CT10X Manuale utente

CT10X

Barcode Scanner

Instruction Manual

IMPORTANT NOTICE

Safety Precaution

* DO NOT disassemble the scanner, or place foreign

matter into the scanner cause a short circuit or circuit

damage.

* DO NOT expose the scanner or battery to any

flammable sources.

Maintenances Precaution

* Use a clean cloth to wipe dust off the body of the

scanner.

* If you find the scanner abnormal, write down the

specific scenario and consult the maintenanceperson.

Contents

IMPORTANT NOTICE...................................................................... 2

Safety Precaution. .....................................................................2

Maintenances Precaution. ......................................................... 2

Contents...........................................................................................3

Overview of CT10X Barcode Scanner..............................................5

Features of the Scanner............................................................ 5

Appearance...............................................................................5

Introduction of Key Function. .....................................................6

Specifications. ............................................................................ 6

Correct Aiming. ..........................................................................7

IncorrectAiming. ........................................................................7

QUICK START ........................................................................................7

Enter the Setting Mode. .............................................................9

Exit the Setting Mode with Save.................................................9

Exit the Setting Mode without Save............................................ 9

Restore Factory Defaults. ........................................................10

Check Software Version..........................................................10

Save Custom Settings..............................................................11

Chapter 1 Features and Basic Setups............................................12

1.1 Battery ............................................................................ 13

1.1.1 Mounting the battery(charging)..............................13

1.1.2 How to operate CT10XBarcode Scanner..................13

1.1.3 Auto Power Off.......................................................13

1.2 Transmit Buffer ............................................................... 14

1.2.1 Inventory Mode...................................................... 16

1.3 LED Indicator.................................................................. 17

1.4 Beeper ........................................................................... 17

1.4.1 Beeper Volume......................................................18

1.5 Scan Modes....................................................................19

1.5.1 Manual Mode......................................................... 19

1.5.2 Auto Power Off Mode.............................................20

1.5.3 Auto-induction Mode.............................................. 21

1.6 Symbologies Supported......................................................22

1.7 USB Wired Data Transmission........................................22

Chapter 2 How to Connect with BT................................................23

2.1.Select Output Interface................................................... 24

2.1.1 BT SPP Mode........................................................ 24

2.1.2 BT HID Mode.............................................................24

2.2 Setting up a BT connection. ............................................25

2.3 Connect to PC via BT......................................................26

2.4 Connect to PDA via BT....................................................31

2.4.1 One-click Android Connection....................................36

2.4.2 One-click iOS Connection..........................................39

2.4.3 Connect via BT Input Method..................................42

Chapter 3 SYMBOLOGY SETTINGS.............................................45

3.1 Codabar...........................................................................46

3.2 Code25: Industrial 25.......................................................47

3.3 Code25: Interleaved 25....................................................48

3.4 Code25: Matrix 25............................................................49

3.5 Code25: Standard 25.......................................................50

3.6 Code 39. ..............................................................................51

3.6.1 Enable/Disable Code 39. .........................................51

3.6.2 START/STOP Transmission.....................................51

3.6.3 Checksum Verification..............................................52

3.6.4 Standard/Full ASCII Code 39. ..................................53

3.7 Code 93. ..............................................................................54

3.8 Code 128. ............................................................................55

3.9 EAN-8. .................................................................................54

3.9.1 Enable/Disable EAN-8.............................................55

3.9.2 Convert to EAN-13...................................................56

3.9.3 Checksum Transmission..........................................57

3.10 EAN-13. .............................................................................58

3.10.1 Enable/Disable EAN-13.........................................58

3.10.2 Convert to ISBN. ....................................................58

3.10.3 Checksum Transmission........................................59

3.11 UPC-A. ...............................................................................60

3.11.1 UPC-A Output “0”. ..................................................60

3.11.2 UPC-A Checksum Transmission. ...........................60

3.12 UPC-E. ...............................................................................61

3.12.1 Enable/Disable UPC-E. .........................................61

3.12.2 UPC-E Checksum Transmission. ..........................61

3.13 MSI. ....................................................................................62

Overview of CT10X Barcode Scanner

Features of the Scanner

* Small size, portable.

* User feedback via LED indicator andbeeper

* The voice volume of scan barcode successfully could change via

setting barcode.

* Built-in 256 KB Flash memory can store up to thousand scan

barcodes.

* Provides 2 KB memory for reserve buffer while Bluetooth

connection interrupt, can store up to 110 scan barcodes.

* Supports BT SPP.

* Supports BT HID.

★ Supports a wide range of barcode types. FedEx and USPS

barcodes are all supported.

★ Whole body shockproof and drop resistance design

★ Proprietary intellectual property rights

★ Comfortable operating feel

★ Button life up to 3 million times

★ Support BT standard protocol, no need adaptor

★ 1500mAh large capacity lithium battery

★ Long working hours

★ The maximum readable digit extend to 64-bit. CT10X both wired

and wireless mode support 64bit readable

★ Prefix and suffix are allowed to be added. Reset to factory default

settings by scanning the “Factory Reset” barcode.

Appearance

Scan Wi

Bluetooth Wireless mode USB Wired mode

Introduction of Key Function

* Long press Scan button 3 seconds will turn on the CT10X

scanner.

* Long press Scan button 3 seconds will turn off the CT10X

scanner.

* Flip the Scan button can read the barcodes.

Specifications

PHYSICAL CHARACTERISTICS

Material

Size

Color

Power supply

Weight

ABS+TPU

Length 160mm*Width 70mm* Height 90mm

White, Black

Built-in rechargeable lithium battery

150g(With battery)

PERFORMANCE CHARACTRISTICS

Bluetooth

Interfaces Supported

Light Source (Laser)

Sensor

Decode Capability

Resolution

Nominal WorkingDistance

Decode Rate

Scan width

Decode mode

Scan mode

Print Contrast Minimum

Scan angles

Cylinder Horizontal Scan

Indication

Radio Range

POWER

Voltage

Laser Safety

EMC

standby Current

Operating current

Bluetooth class 2.0, Version+EDR

USB, RS232, PS2 Keyboard

Laser LED650+/-20nm

2500 pixels

Codabar, USPS, FedEx, UPC-E, Code 93,

MSI, Code 128, UCC/EAN-128, Code 39,

EAN-8, EAN-13, UPC-A, ISBN, Industrial 25,

Interleaved 25, Standard 25, 2/5 Matrix

5mil

6~30cm

100 decodes per second

30mm=Scanner Window

Single-Line Aiming

Auto off mode / Manual mode

30%

Roll30° Pitch75° Yaw65°

Diameter 35mm

Beeper, LED

10m Visual range

DC 5V

Accord with national level two laser safety

standards

CE & FCC DOC Compliance

35mA

60mA

USER ENVIRONMENT

Operating Temp.

Storage Temp.

Operating Humidity

Storage Humidity

Drop Specifications

Accessories

0 to 50. °C / 32 to 122°F

20-85% ( non-condensing )

Free fall of 1.5m air drop

Lithium battery, Charger., Data lines

Correct Aiming

Incorrect Aiming

QUICK START

The setting of the CT10X Barcode Scanner can be changed by

reading the setup barcodes contained in this manual. This section

describes the procedure of setting the CT10X Barcode Scanner by

reading the setup barcodes and provides some example for

demonstration.

Step 1: Turn on CT10X Barcode Scanner. It will response with a

long beep(high tone), it's LED shows red and with Intmt

twinkle.

Note: How the CT10X Barcode Scanner establishes a

connection with computer or other compatible device,

please refer to Chapter 2.

Step 2: Enter the Setting Mode. The CT10X Barcode Scanner

will response three beeps (tone descending from high to

low), and its LED indicator will flashing purple.

Enter Setup

Step 3: Read a Setup barcode. The CT10X Barcode Scanner will

response three beeps (tone ascending from low to high),

and its LED indicator will flashing purple.

For Example:

Enable Codabar

Step 4: Exit the Setting Mode. The CT10X Barcode Scanner will

response three beeps (tone descending from high to low),

and its LED indicator will not flashing purple and power off.

Note: When any setup error occurs, the CT10X Barcode

Scanner will respond with a long beep (low tone), and its

LED indicator will flashing purple.

Exit with Save

Steps of Setup

Enter Setup

Details (eg: Enable/Disable a Barcode)

Exit Setup

Enter the Setting Mode

For the scanner to enter the setting mode, you must have it read the

"Enter Setup" barcode, which will be located at the bottom of almost

every page of this manual.

The CT10X Barcode Scanner will respond with three beeps (tone

descending from high to low), and its LED indicator becomes purple

and go off quickly after reading the barcode.

Enter Setup

For setting scanner parameters, see "Read a Setup Barcode" below.

Exit the Setting Mode with Save

For the scanner to exit the setting mode, you must have it read the

"Exit with Save" barcode, which will be located at the bottom of

almost every page of this manual.

Just like reading the "Enter Setup" barcode, the scanner will respond

with three beeps (tone ascending from low to high) after reading the

barcode.

Exit with Save

Exit the Setting Mode without Save

If you want to exit the setting mode without saving any changes, you

must have the scanner read the "Exit without Save" barcode.

Just like reading the "Enter Setup" barcode, the scanner will respond

with three beeps (tone ascending from low to high) after reading the

barcode.

Exit without Save

Restore Factory Defaults

"Restore Factory Defaults" is a special barcode. The CT10X

Barcode Scanner will respond with a short beep (high tone) after

reading this barcode. At this time, the scanner system could restore

factory defaults, and no need to read "Exit with Save" barcode

again. The Scanner defaults enable HID, PIN defaults 10010.

Restore Factory

Note: Most of setting mode have restore factory defaults selection.

The factory default value for each setting is indicated by an asterisk

"*".

You could use this barcode at the following status:

1. The scanner can not work. For example, it can not readbarcodes.

2. You forget the settings you did to the scanner before, and you

don't want to be affected by the settings when you use the

scanner.

3.After using a function which is not be used usually in the scanner.

Check Software Version

If you want to know the software version of CT10X, should read the

‘Enter Setup’ and ‘Output Software Version’ barcode:

Enter Setup

Output Software Version

Checking the software version is done at the enter setup mode, so

after output the software version, need to read ‘Exit without Save’

barcode.

Exit without Save

Indice

Altri manuali CILICO Lettore di codici a barre

CILICO

CILICO IOT800 Manuale utente

CILICO

CILICO CT20 Manuale utente

CILICO

CILICO CT10 Manuale utente

CILICO

CILICO CT20 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente