CILICO CT20 Manuale utente
CT20 Barcode Scanner
User Manual
2
IMPORTANT NOTICE
Safety Precaution
* DO NOT disassemble the scanner, or place foreign matter into the scanner cause a
short circuit or circuit damage.
* DO NOT expose the scanner or battery to any flammable sources.
Maintenances Precaution
* Use a clean cloth to wipe dust off the body of the scanner.
* If you find the scanner abnormal, write down the specific scenario and consult the
maintenance person.
Enviromental Paramenter
Operating Temp. 0 to 50 ºC / 32 to 122 ºF
Storage Temp. 0 to 50 ºC / 32 to 122 ºF
Operating Humidity 20 - 85% (non-condensing)
Storage Humidity 20 - 85% (non-condensing)
3
Contents
IMPORTANT NOTICE..................................................................................................................... 2
Safety Precaution........................................................................................................................ 2
Maintenances Precaution............................................................................................................ 2
Enviromental Paramenter...........................................................................................................2
Contents...............................................................................................................................................3
Overview of CT20 Barcode Scanner............................................................................................ 5
Features of the Scanner...............................................................................................................5
Appearance..................................................................................................................................5
Introduction of Key Function......................................................................................................6
Specifications.............................................................................................................................. 6
Correct Aiming............................................................................................................................7
Incorrect Aiming......................................................................................................................... 7
QUICK START.................................................................................................................................. 8
Enter the Setting Mode............................................................................................................... 9
Exit the Setting Mode with Save................................................................................................ 9
Exit the Setting Mode without Save......................................................................................... 10
Restore Factory Defaults...........................................................................................................10
Check Software Version............................................................................................................10
Save Custom Settings................................................................................................................11
Chapter 1 Features and Basic Setups........................................................................................12
1.1 Battery.................................................................................................................................13
1.1.1 Mounting the battery (charging)..............................................................................13
1.1.2 How to operate CT20 Barcode Scanner.................................................................. 13
1.1.3 Auto Power Off........................................................................................................ 14
1.2 Transmit Buffer................................................................................................................... 15
1.2.1 Inventory Mode........................................................................................................16
1.3 LED Indicator..................................................................................................................... 17
1.4 Beeper................................................................................................................................. 18
1.4.1 Beeper Volume.........................................................................................................19
1.5 Scan Modes......................................................................................................................... 20
1.5.1 Manual Mode........................................................................................................... 20
1.5.2 Continuous Mode.....................................................................................................21
1.5.3 Auto Power Off Mode..............................................................................................22
1.5.4 Auto-induction Mode...............................................................................................24
1.6 Symbologies Supported...................................................................................................... 25
1.7 USB Wired Data Transmission........................................................................................... 25
Chapter 2 How to Connect with BT................................................................................................. 26
2.1. Select Output Interface...................................................................................................... 27
2.1.1 BT SPP Mode...........................................................................................................27
2.1.2 BT HID Mode.......................................................................................................... 27
4
2.2 Setting up a BT connection.................................................................................................28
2.3 Connect to PC via BT......................................................................................................... 29
2.4 Connect to PDA via BT...................................................................................................... 35
2.4.1 One-click Android Connection................................................................................ 39
2.4.2 One-click iOS Connection.......................................................................................42
2.4.3 Connect via BT Input Method................................................................................. 45
Chapter 3 SYMBOLOGY SETTINGS........................................................................................... 54
3.1 CODABAR......................................................................................................................... 55
3.2 CODE 25 –INDUSTRIAL25..............................................................................................56
3.3 CODE 25 –INTERLEAVED 25......................................................................................... 57
3.4 CODE 25 –MATRIX 25..................................................................................................... 58
3.5 CODE 25-STANDARD 25.................................................................................................59
3.6 CODE 39.............................................................................................................................60
3.6.1 Enable/Disable Code 39...........................................................................................60
3.6.2 START/STOP Transmission.................................................................................... 60
3.6.3 Checksum Verification..........................................................................................61
3.6.4 STANDARD/FULL ASCII CODE 39................................................................... 62
3.7 CODE 93.............................................................................................................................62
3.7 CODE 93.............................................................................................................................63
3.8 Code 128............................................................................................................................. 64
3.9 EAN-8................................................................................................................................. 65
3.9.1 Enable/Disable EAN-8............................................................................................ 65
3.9.2 Convert to EAN-13..................................................................................................65
3.9.3 Checksum Transmission.......................................................................................... 66
3.10 EAN-13............................................................................................................................. 67
3.10.1 Enable/Disable EAN-13........................................................................................ 67
3.10.2 Convert to ISBN.................................................................................................... 67
3.10.3 Checksum Transmission........................................................................................ 68
3.11 UPC-A...............................................................................................................................69
3.11.1 UPC-A Output ‘0’.................................................................................................. 69
3.11.2 UPC-A Checksum Transmission........................................................................... 69
3.12 UPC-E............................................................................................................................... 70
3.12.1 Enable/Disable UPC-E.......................................................................................... 70
3.12.2 UPC-E Checksum Transmission........................................................................... 70
3.13 MSI....................................................................................................................................71
3.14 CODE 11...........................................................................................................................72
Chapter 4 DEFINING OUTPUT FORMAT................................................................................... 73
4.1 CODE ID.............................................................................................................................74
4.2 Suffix Code of Barcode Settings........................................................................................ 75
APPENDIX I.................................................................................................................................... 76
5
5
Overview of CT20 Barcode Scanner
CT20 Bluetooth wireless barcode scanner,which is developed by our company, is a
cost effective,small size, light weight, fits ergonomically,easy to carry ,1D bar code
scanner.
CT20 bar code scan parts using the 1D bar code scanning solutions of red light bar
code scanning patent technology of CILICO, Using 630nm red light indicates a CCD
imaging technology and intelligent image recognition system, integrating
high-performance processor and decoded board, with ability to read fast decoding and
high precision, high resistance to environmental interference. It can easily read the bar
code on the paper, merchandise,etc...The barcode scanning distance is much improved
than similar products, it scanning very fast, reading bar code highly exactly.
CT20 Bluetooth barcode scanner has internal long distance wireless Bluetooth ,and it
can compatible with laptops, desktops or other real-time data transmission Bluetooth
devices. The power source of it is a pair of replaceable AA batteries, When you're
outside of BT, the 256K memory can store tens of thousands of scanned information
to ensure that your data is security
Features of the Scanner
*Small size, portable.
*Supports three scan modes, including Continuous Mode, Manual Mode, Auto-off Mode
*Supports most popular barcode symbologies
*User feedback via LED indicator and beeper
*The voice volume of scan barcode successfully could change via setting barcode
*Built-in 128 KB Flash memory can store up to thousand scan barcodes.
*Provides 2 KB memory for reserve buffer while Bluetooth connection interrupt, can store
up to 110 scan barcodes.
* Supports BT SPP.
* Supports BT HID.
* Programmable parameters include data output format, editing format, symbologies, etc.
6
Appearance
Introduction of Key Function
7
Note: Press Power button turn on/off
Turn off the scanner,press the mutifunction with Power button to clear the lastest pair
information of record in the CT20.
Press the multifunction to send the recorded bar code.
After turn off the scanner,press the scan button with Power button to clear the recording bar code
and turn on the scanner.
Specifications
Correct Aiming
Radio range
10m visual range
Bluetooth
Bluetooth class 2. 0 virsion+EDR
Sensor
2500 pixels
Communication mode
SPP ,HID
Light source
Red light LED 630± 20nm
Decode capacity
Codabar，Code 11，Code 93，MSI,Code128，UCC/EAN-128，Code 39，EAN-8，
EAN-13，UPC-A，ISBN，Industrial 25，Industrial 25、Standard 25，2/5 Matrix
Resolution
5mil
Scan distance
6~30cm
Scan speed
200times/second
indication
Beeper,indicator
Print contrast ratio
30%
Cylinder Horizontal scan
Diameter35mm
Operating Temp.
0 to 50 ºC / 32 to 122 ºF
Storage Temp.
0 to 50 ºC / 32 to 122 ºF
Operating Humidity
20 - 85% (non-condensing)
Storage Humidity
20 - 85% (non-condensing)
8
Incorrect Aiming
QUICK START
The setting of the CT20 Barcode Scanner can be changed by reading the setup barcodes
contained in this manual. This section describes the procedure of setting the CT20
Barcode Scanner by reading the setup barcodes and provides some example for
demonstration.
Steps Action Feedback if Successful
1 Turn on CT20 Barcode Scanner... It will response with a long beep（high
tone ）, it's LED shows red and with
Intmt twinkle.
Note: How the CT20 Barcode Scanner establishes a connection with computer or other
compatible device, please refer to Chapter 2.
2Enter the Setting Mode... The CT20 Barcode Scanner will
response three beeps (tone descending
from high to low), and its LED indicator
will flashing purple.
3Read a Setup barcode The CT20 Barcode Scanner will
response three beeps (tone ascending
from low to high), and its LED indicator
will flashing purple.
For Example:
4Exit the Setting Mode... The CT20 Barcode Scanner will
response three beeps (tone descending
from high to low), and its LED indicator
Enter Setup
Enable Codabar
9
will not flashing purple and power off.
Note: When any setup error occurs, the CT20 Barcode Scanner will respond with a long
beep (low tone), and its LED indicator will flashing purple.
Steps of Setup:
Enter the Setting Mode
For the scanner to enter the setting mode, you must have it read the "Enter Setup"
barcode, which will be located at the bottom of almost every page of this manual.
The CT20 Barcode Scanner will respond with three beeps (tone descending from high to
low), and its LED indicator becomes purple and go off quickly after reading the barcode.
For setting scanner parameters, see "Read a Setup Barcode" below.
Exit the Setting Mode with Save
For the scanner to exit the setting mode, you must have it read the "Exit with Save"
barcode, which will be located at the bottom of almost every page of this manual.
Just like reading the "Enter Setup" barcode, the scanner will respond with three beeps
(tone ascending from low to high) after reading the barcode.
Exit with Save
Enter Setup
Details (eg: Enable/Disable a Barcode)
Exit Setup
Enter Setup
10
Exit the Setting Mode without Save
If you want to exit the setting mode without saving any changes, you must have the
scanner read the "Exit without Save" barcode.
Just like reading the "Enter Setup" barcode, the scanner will respond with three beeps
(tone ascending from low to high) after reading the barcode.
Restore Factory Defaults
"Restore Factory Defaults" is a special barcode. The CT20 Barcode Scanner will respond
with a short beep (high tone) after reading this barcode. At this time, the scanner system
could restore factory defaults, and no need to read "Exit with Save" barcode again. The
Scanner defaults enable HID, PIN defaults 10010.
Note: Most of setting mode have restore factory defaults selection. The factory default
value for each setting is indicated by an asterisk "*".
You could use this barcode at the following status:
1、The scanner can not work. For example, it can not read barcodes.
2、You forget the settings you did to the scanner before, and you don't want to be affected
by the settings when you use the scanner.
3、After using a function which is not be used usually in the scanner.
Restore Factory
Defaults
Exit with Save
Exit without Save
Altri manuali per CT20
1
Indice
Altri manuali CILICO Lettore di codici a barre
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
