Cisco N540X-6Z18G-SYS-A Manuale utente
Install the Device
Before you begin this task, ensure that you have read and understood the safety warnings in the Standard
Warning Statements section of the Safety Warnings handout.
Installing the Cisco NCS 540 Small Density routers involves these tasks:
All the installation instructions for N540X-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, and
N540X-4Z14G2Q-A/D variants remain similar and any differences between the routers are specifically
called out.
The illustrations are for reference purpose only and may vary based on your Cisco NCS 540 variant.
Note
•Rack Compatibility, on page 1
•Set up Device on Rack or Wall, on page 3
Rack Compatibility
We recommend that you follow these rack specifications.
Rack Types
Figure 1: Rack specification EIA (19 inches and 23 inches)
Install the Device
1
Table 1: Rack specification EIA (19 inches and 23 inches)
Mounting Flange
Dimension (Z)
Rack Mounting Hole
Centre-Centre (Y)
Rack Front Opening
(X)
Rack TypePost Type
19 inches (48.2
centimeters)
18.31 inches (46.5
centimeters)
17.75 inches (45
centimeters)
19 inches (48.3
centimeters)
4 Post
2 Post
23 inches (58.4
centimeters)
22.31 inches (56.6
centimeters)
21.75 inches (55.24
centimeters)
23 inches (58.4
centimeters)
4 Post
2 Post
Figure 2: Four Post Rack Type
Install the Device
2
Install the Device
Rack Types
Figure 3: Two Post Rack Type
Set up Device on Rack or Wall
You can choose to either set up the Cisco NCS 540 on a rack or wall mount it.
Rack Mount
The device is shipped with rack mounting brackets that are to be secured on the sides of the device.
If the rack is on wheels, ensure that the brakes are engaged or the rack is otherwise stabilized.
Caution
Table 2: Cisco NCS 540 Small Density Router Rack-Mount Kit
Part DescriptionQuantity
Rack-mount brackets2
M3 x 0.5 x 6-mm Phillips flat-head screws8 (48-101850-01)
SCR, M, PAN, PH, SEX, 10-32 x 0.365"L, CSwZN, nickel alloy2 (48-101620-01)
Install the Device
3
Install the Device
Set up Device on Rack or Wall
Part DescriptionQuantity
LUG, FAST, UNIN, #6AWG, #10, 2 HOLES1 (32-0619-01)
SCR, M, PAN, PH, 12-24 x 0.49"L, CSwZN, nickel alloy4 (48-101690-01)
To mount the rack on the router:
1. Attach the rack-mount brackets and the cable guides to the router as follows:
a. The router has port-side intake modules, position the router so that its ports are facing the cold aisle.
b. Position the bracket ears facing front or middle rack-mount, on the side of the chassis so that the holes
are aligned.
c. Use four M3 screws to attach the brackets to the chassis.
d. Repeat Steps 1b and 1c with the other rack-mount bracket on the other side of the router.
e. Use four No. 12-24 screws and mount the router to the rack.
Figure 4: Installing 19 inch Rack-Mount Brackets in the Front
Install the Device
4
Install the Device
Rack Mount
Figure 5: Installing Cable Management and 19 inch Rack-Mount Brackets in the Front
Figure 6: Installing 19 inch Rack-Mount Brackets in the Middle
Install the Device
5
Install the Device
Rack Mount
Figure 7: Installing Cable Management and 19 inch Rack-Mount Brackets in the Middle
Figure 8: Installing Cable Management and 23 inch Rack-Mount Brackets in the Middle
Install the Device
6
Install the Device
Rack Mount
Figure 9: Installing Cable Management and 23 inch Rack-Mount Brackets in the Front
Figure 10: Installing Cable Management and ETSI Rack-Mount Brackets in the Front
Install the Device
7
Install the Device
Rack Mount
Figure 11: Installing Cable Management and ETSI Rack-Mount Brackets in the Middle
2. Install the router onto the 2-post rack as follows:
a. Lift and position the router into position between the two rack posts.
b. Move the router until the rack-mount brackets come in contact with the two rack posts.
c. Hold the chassis at level and have another while the second person inserts two screws 12-24 in each
of the two rack-mount brackets (using a total of four screws) and into the cage nuts or threaded holes
in the vertical rack-mounting rails.
d. Tighten the 12-24 screws to 30 in-lb (3.39 N.m).
Install the N540-6Z18G-SYS-A/D router with Air Plenum
Air plenum is only applicable for Cisco N540-6Z18G-SYS-A/D router.
Note
Plenum Assembly on ETSI Rack
1. Remove the screws on the sides of the chassis, according to your mounting option:
• To front mount the chassis, remove four screws on the right side of the chassis. The "F" highlighted
screws.
• To mid mount the chassis, remove six screws on the left side of the chassis. The "F" and "R"
highlighted screws.
Install the Device
8
Install the Device
Install the N540-6Z18G-SYS-A/D router with Air Plenum
Figure 12: Remove Screws from the Sides of the Chassis
Left side of the chassis1
Right side of the chassis2
Screw3
2. Fix the plenum (800-110707-01) with help of six screws (48-101850-01).
Figure 13: Fix the Plenum with Screws
Air Plenum1
Screw2
3. Fix the mounting bracket (700-131329-01) with the help of four screws (48-101850-01), according to
your mounting option.
Install the Device
9
Install the Device
Install the N540-6Z18G-SYS-A/D router with Air Plenum
• For front mount (refer image A), fix the mounting bracket in the front and the dummy cover at the
rear.
• For mid mount (refer image B), fix the mounting bracket in the mid and the dummy cover at the
front.
4. Fix the dummy cover (700-131330-01) with help of three screws (48-101850-01).
Figure 14: Fix Mounting Bracket and Dummy Cover
Mounting Bracket1
Dummy Cover2
Screw3
5. Fix the mounting bracket (700-131271-01) with help of four screws (48-101850-01).
6. For mid mount, fix the cable bracket (700-130022-01) with help of two screws (48-101850-01). The cable
bracket is applicable only in case of mid mount.
Figure 15: Fix Mounting Bracket and Cable Bracket
Mounting Bracket1
Cable Bracket2
Screw3
7. Fix the assembly to rack either in the front or in the mid, with help of four screws (48-101690-01).
Install the Device
10
Install the Device
Install the N540-6Z18G-SYS-A/D router with Air Plenum
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Cisco Hardware di rete
Cisco
Cisco SCE 2000 4/8xFE Manuale utente
Cisco
Cisco 8011-2X2XP4L Manuale
Cisco
Cisco IAD2430 Series Manuale
Cisco
Cisco Cisco ONS 15600 SDH Manuale utente
Cisco
Cisco SA-VAM - VPN Acceleration Module Manuale dell'operatore
Cisco
Cisco Aironet 340 Series Manuale utente
Cisco
Cisco MERAKI CW9166D1 Manuale utente
Cisco
Cisco VSVM Manuale di istruzioni
Cisco
Cisco SA520-K9 - SA 500 Series Security Appliances Manuale utente
Cisco
Cisco NSS2000 - Gigabit Storage System Chassis Come usare
Cisco
Cisco WEC600N Manuale utente
Cisco
Cisco ON100 Network Agent Manuale utente
Cisco
Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card... Manuale
Cisco
Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch... Manuale utente
Cisco
Cisco CVPN3015-NR - VPN Concentrator 3015 Manuale utente
Cisco
Cisco CPS-MSP-1RU-K9 Manuale utente
Cisco
Cisco WAE-674-K9 - Wide Area Application Engine... Manuale
Cisco
Cisco Cisco ASA Series Manuale utente
Cisco
Cisco NCS 1010 Foglio di istruzioni
Cisco
Cisco Catalyst 8510 Manuale utente
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
