Cisco PRISMA II XD Manuale utente

One Sheet

High-density optical platform improves performance, lowers costs and

increases reliability.

The Prisma II™XD High Density optical platform provides network operators with unique

features that enable the deployment of a carrier-class network. Advanced features, such as

the highest module density in the industry, rugged construction and a unique design

optimized for easy module insertion, setup, and administration, make the Prisma II XD High

Density platform the key to increased network reliability, scalability and more cost-effective

deployments. The Prisma II XD has been designed to exclusively house and manage the

high density modules in a low profile 3RU chassis– without the need for an additional host

module.

Large-scale forward-path or reverse-path deployments need the versatility and

performance of Cisco’s Prisma II XD platform. It can house 16 modular optical transmitters

or receivers in a 3RU chassis for considerable density advantages.

Cisco’s solution results in:

•Superior Headend/Hub rack space efficiency

•Increased network reliability

•Lower maintenance costs

•Higher RF output levels

•Elimination of most reverse headend driver amplifiers

•Improved performance, low costs, and increased reliability

Prisma II XD High-Density Optical Platform

One Sheet

G1672B

©2007-2008 Cisco Systems, Inc. All rights reserved. Product features subject to change without notice. Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, and Prisma II are

registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective

owners.

Scientific Atlanta, Inc.

5030 Sugarloaf Parkway

Lawrenceville, GA 30042-5447 USA

Tel: 770.236.5092

Contact: [email protected]

www.scientificatlanta.com

Prisma II XD Chassis features:

Chassis height is only 3RU; houses up to 16 high density modules

•Highest density optical transport chassis in the industry

•5.3 transport modules per 1RU of rack space

•Compatibility with the Prisma II HD modules

AC or DC powered

•Two slots on the rear of the chassis for AC modules – modules

are field replaceable, redundant and load sharing

•DC power can be wired directly to the chassis without the need

for a power supply module – reduces deployment costs;

redundant power connections provide power sharing from

chassis-to-chassis

All RF connections are made in the rear of the chassis

•RF connections for each module are made by a high-reliability

blind-mate connection on the inside backplane – no need to

physically connect the RF cables to each module; very easy to

plug-and-play

All optical connections are made in the front of the chassis

•Laser modules are designed with optical bulkheads at a 45

degree angle for eye protection as well as for improved fiber

management

•A fiber trough has been designed into the front of the chassis

for improved fiber management

•A dedicated access conduit has been designed into the

chassis to help route fiber from the front and rear of the chassis;

integrated fiber puller

A local craft port is provided on the front of the chassis for

convenient installation setup.

The communication connections are located at the rear of the

chassis; IN/OUT connections include the Element Management,

the ICIM, and the alarm contact closure block.

Three field replaceable fans on the rear of the chassis; the system

can run on two fans in the event of a single fan failure.

Excellent thermal design yields superior power efficiency,

operating at approximately 54 watts per rack unit

•Each high density modules dissipates approximately 7.5 Watts.

Altri manuali Cisco Hardware di rete

Cisco

Cisco Firepower 2130 Guida alla manutenzione e all'assistenza

Cisco

Cisco NCS 1001 Guida

Cisco

Cisco SA520-K9 - SA 500 Series Security Appliances Manuale utente

Cisco

Cisco NAC3350-PROF-K9 - NAC Profiler Server Manuale utente

Cisco

Cisco NCS 1002 Aggiornamento firmware

Cisco

Cisco linksys PLTK300 Manuale utente

Cisco

Cisco CSS11501 - 100Mbps Ethernet Load Balancing... Manuale utente

Cisco

Cisco Nexus 93600CD-GX Manuale

Cisco

Cisco PC4000 Manuale utente

Cisco

Cisco IAD2430 Series Manuale

Cisco

Cisco Firepower 1010 Manuale utente

Cisco

Cisco 5400 Manuale di istruzioni

Cisco

Cisco ASR 5000 Manuale utente

Cisco

Cisco Fourth-Generation Versatile Interface Processor... Manuale dell'operatore

Cisco

Cisco MERAKI MX85 Series Manuale

Cisco

Cisco ONS 15454 SDH E1-75 Manuale utente

Cisco

Cisco Nexus 93180LC-EX Manuale utente

Cisco

Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control... Manuale utente

Cisco

Cisco ONS 15200 Series Manuale utente

Cisco

Cisco ONS 15310-MA Manuale utente

Cisco

Cisco ONS 15310-CL Manuale utente

Cisco

Cisco SOURCEfire 3D500 Manuale utente

Cisco

Cisco ONS 15216-MD-40-ODD Manuale utente

Cisco

Cisco ONS 15454 DWDM Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente