Cisco WAP121 Manuale utente

Altri manuali per WAP121

9

Questo manuale è adatto per i seguenti modelli

13

Indice

Altri manuali Cisco Punto di accesso wireless

Cisco

Cisco USC 3330 Manuale utente

Cisco

Cisco AIR-LAP1310G Manuale utente

Cisco

Cisco Meraki MR20-HW Manuale utente

Cisco

Cisco Aironet 3502P Manuale utente

Cisco

Cisco WET200 Wireless-G Business Ethernet Bridge Manuale utente

Cisco

Cisco 1142 - Aironet Standalone AP Manuale utente

Cisco

Cisco AT&T U-VERSE VEN401 Manuale utente

Cisco

Cisco AIR-MP20B Manuale utente

Cisco

Cisco Aironet 600 Series Manuale utente

Cisco

Cisco Aironet 1520 Series Manuale

Cisco

Cisco Meraki MR33 Manuale utente

Cisco

Cisco Aironet 1250 Series Manuale utente

Cisco

Cisco Catalyst 9120AX Series Manuale utente

Cisco

Cisco 1262 Manuale utente

Cisco

Cisco Aironet 1810W Series Manuale utente

Cisco

Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access... Manuale

Cisco

Cisco Linksys WAP55AG Manuale utente

Cisco

Cisco AT&T U-VERSE VEN401 Manuale utente

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Manuale utente

Cisco

Cisco Aironet 521 Manuale utente

Cisco

Cisco Aironet 1570 Series Manuale

Cisco

Cisco Small Business AP541N Manuale utente

Cisco

Cisco Small Business Pro Manuale utente

Cisco

Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access... Manuale

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

Draytek

Draytek VIGORAP 902 Manuale utente

●

●

●

●

●

●

●

●

●

●

●

●

Reboot and Reset the Wireless Access Point

to Factory Default Settings

Objective

Rebooting or restarting the Wireless Access Point (WAP) deletes the logs stored in the

volatile memory. This process is performed when certain changes in the settings need a

reboot or if the WAP is not responding or booting up properly. Resetting the WAP to factory

default settings, on the other hand, erases all configurations that have been set by the user,

and restores the device to its original settings. A reset is recommended if most of the WAP

settings need to be reconfigured.

This article aims to show you how to reboot and reset your WAP to factory default settings.

Applicable Devices

WAP100 Series

WAP300 Series

WAP500 Series

Software Version

1.0.6.5 - WAP121, WAP321

1.0.2.8 - WAP131, WAP351

1.0.1.7 - WAP150, WAP361

1.3.0.3 - WAP371

1.2.1.3 - WAP551, WAP561

1.0.0.17 - WAP571, WAP571E

Reboot the Wireless Access Point

There are two ways to reboot the WAP:

Hardware reboot

Reboot through the web-based utility

Note: Images may vary depending on the exact model of your WAP. The images below are

taken from the WAP321.

Hardware Reboot

You have two ways to reboot the device hardware:

Turn the device off by pressing the POWER button while the device is connected to the

power outlet.

Note: The POWER button only works if the device is using a power adapter. If power is

supplied through Power over Ethernet (PoE), unplug your Ethernet connection for three

●

seconds then plug it back.

Press the Reset button for about three seconds only, or until the lights go off.

Reboot through the Web-based Utility

Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.

Step 2. Click the Reboot button.

Step 3. Click OK in the confirmation window.

●

●

You should now have rebooted your device.

Reset to Factory Default Settings

There are two ways to reset the WAP to factory default settings:

Hardware reset

Reset through the web-based utility

Hardware Reset

Step 1. Press the Reset button for more than 10 seconds until the lights go off.

Step 2. Release the Reset button when the lights turn back on.

Reset through the Web-based Utility

Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.

Step 2. Click the Reboot To Factory Default button.

Step 3. Click OK in the confirmation window.

You should now have reset your device to factory default settings.