Cisco WAP131 Manuale utente

Reboot and Reset Factory Default Settings on

the WAP131

Objective

The factory default reset erases all configuration settings that have been modified by the

user, and restores the device to its original settings. This may be helpful if you lose the

password to a device and wish to regain access.

Performing a reboot restarts the device with a saved configuration.

The objective of this article is to show you how to reset to factory default settings and how to

reboot a WAP131 Wireless Access Point.

Note: It is advised to save a backup copy of the configuration before beginning this process.

Refer to Download and Backup Configuration Files on the WAP131 and WAP351 for

additional information.

Applicable Devices

• WAP131

Software Version

• 1.0.0.39

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press and hold the Reset button located at the back of the device for approximately

ten seconds with a pin.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the Power button to turn off the device. After 10 seconds have passed, press

the Power button a second time to power the device back on. The Access Point reboots and

is refreshed.

Note: The power button will not have any affect if the WAP is being powered with PoE

(Power over Ethernet).

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login page appears. Login with the saved administration credentials.

Altri manuali per WAP131

3

Indice

Altri manuali Cisco Punto di accesso wireless

Cisco

Cisco Meraki MR36H Manuale utente

Cisco

Cisco Aironet 2600 Series Manuale utente

Cisco

Cisco AIR-LAP1310G Manuale utente

Cisco

Cisco Aironet 1800i Manuale utente

Cisco

Cisco Aironet 1100 Series Manuale dell'operatore

Cisco

Cisco Meraki MR55 Manuale utente

Cisco

Cisco IW3702 Manuale utente

Cisco

Cisco Meraki GR10 Manuale utente

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Manuale utente

Cisco

Cisco Aironet 1570 Series Manuale utente

Cisco

Cisco Meraki Go GR60 Manuale utente

Cisco

Cisco WAP131 Manuale utente

Cisco

Cisco AP-702W Guida di riferimento rapido

Cisco

Cisco IW3702 Manuale utente

Cisco

Cisco Aironet 1140 Series Manuale utente

Cisco

Cisco 1262 Manuale utente

Cisco

Cisco Catalyst Wireless 9164I Series Manuale utente

Cisco

Cisco ASA 5506W-X Manuale utente

Cisco

Cisco Aironet 1570 Series Guida

Cisco

Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access... Manuale

Cisco

Cisco Aironet 1520 Series Manuale

Cisco

Cisco Meraki MR84 Manuale

Cisco

Cisco WAP351 Manuale utente

Cisco

Cisco 1142 - Aironet Standalone AP Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

Draytek

Draytek VIGORAP 902 Manuale utente