Cisco WAP371 Manuale utente

Reboot and Reset Factory Default Settings on

the WAP371

Objective

The factory default reset erases all configuration settings that have been modified by the

user, and restores the device to its original settings. This may be helpful if you lose the

password to a device and wish to regain access.

Note: It is advised to save a backup copy of the configuration before beginning this process.

Refer to Download/Backup Configuration on the WAP 371 for additional information.

Performing a reboot restarts the device with a saved configuration.

The objective of this article is to show you how to reset to factory default settings and how to

reboot a WAP371 Wireless Access Point.

Applicable Devices

• WAP371

Software Version

• 1.0.1.5

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press the Reset button for approximately ten seconds with a pin located at the back

of the device.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log in into the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the power button to turn off the device. After 10 seconds have passed, press

the power button a second time to power the device back on.

The Access Point reboots and is refreshed.

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login Page appears. Login with the saved administration credentials.

Altri manuali per WAP371

3

Indice

Altri manuali Cisco Punto di accesso wireless

Cisco

Cisco WAP131 Manuale di istruzioni

Cisco

Cisco Aironet 3800P Series Manuale utente

Cisco

Cisco AIR-AP1542I-*-K Manuale utente

Cisco

Cisco Catalyst 9124AX Series Manuale

Cisco

Cisco Aironet 521 Manuale utente

Cisco

Cisco Meraki MR45 Manuale utente

Cisco

Cisco WAP125 Manuale utente

Cisco

Cisco WAP300N Manuale utente

Cisco

Cisco Small Business WAP551 Manuale utente

Cisco

Cisco CISCO673-RF - 673 Router Manuale utente

Cisco

Cisco MERAKI MR72 Manuale utente

Cisco

Cisco DPH650 Manuale utente

Cisco

Cisco ASA 5506W-X Manuale utente

Cisco

Cisco AIR-AP352E2R - Aironet 350 - Wireless Access... Manuale utente

Cisco

Cisco Catalyst 9164 Series Manuale utente

Cisco

Cisco ASA 5508-X Manuale

Cisco

Cisco 1830 Series Manuale utente

Cisco

Cisco Catalyst 9136I Series Manuale utente

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Manuale utente

Cisco

Cisco GR10-HW Manuale utente

Cisco

Cisco Meraki CW9163E Manuale utente

Cisco

Cisco WAP125 Manuale utente

Cisco

Cisco Meraki MR33 Manuale utente

Cisco

Cisco 15454-GBIC-LX= - 1000 Mbps GBIC Expansion... Manuale

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

Draytek

Draytek VIGORAP 902 Manuale utente