EN
57
Reminders
1. Use only two AAA (LR03)1.5V Alkaline new batteries, with an expiry date
exceeding one year. Follow the instructions of the battery manufacturer.
Do not power the water timer with sources other than those specified.
2. Replace the batteries at the beginning of each season.
3. During winter and/or when not in use, always remove the batteries and
store the water timer in a dry place at a temperature no lower than 3 °C.
4. Periodically, check the integrity of the seals fitted to the transparent cov-
er and to the cap of the battery housing.
5. Periodically, check that the electrical connections of the battery are firm
and secure.
6. Do not let water freeze inside the product. At the end of each season,
it is recommended that the manual valve upstream is closed and the
system is drained using the manual opening of the control module.
7. Make certain that children and animals cannot play with the water timer
or any of its parts.
8. It is good policy — when the water timer is put into operation for the
first time — to make certain that the programmes run correctly.
9. Avoid harsh tugging of hoses and fittings connected to the water timer.
10. Do not use the water timer with operating pressures lower than 0.2 bar
(2.9 psi) or higher than 12 bar (174 psi).
11. Do not fit the water timer inside buildings.
12. Do not use the water timer with chemicals or liquids other than water.
13. Do not submerge the timer in water or other liquids.
14. Do not let the housing and the internal parts of the water timer come
into contact with chemical agents (e.g. aggressive detergents, chlorine,
fertilizers, etc.).
15. When not programming, keep the cover of the valve box closed to
protect it from atmospheric agents and moisture.
