Clarke CMSSR Manuale utente

ASSEMBLY INSTRUCTIONS

LS0718 - ISS 2

ORIGINAL INSTRUCTIONS

MITRE SAW STAND WITH ROLLERS

MODEL NO: CMSSR

PART NO: 6500975

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for selecting this Clarke mitre saw stand with rollers.

Read this manual before use, the warnings and cautions in this manual will

help you use the mitre saw stand safely.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. This mitre saw stand has a maximum load capacity of 15O kg which must

not be exceeded.

2. Do not stand on top of the mitre saw stand.

3. Take care when placing a load on to the mitre saw stand, it should be

placed gently so that the strain is taken up gradually. Do not drop a load

carelessly.

4. Always check the mitre saw stand for damage before use.

5. Always ensure you are working on a firm flat stable surface.

SPECIFICATIONS

Maximum Dimensions 1710 (fully extended) x 460 x 595-820 mm

Maximum Load 150 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. Screw the handle onto the table

using the screws provided.

2. Slide in the extension arms and

secure from below using the knob

supplied.

3. Insert the rollers into the extension

arms and secure in place using

the knob supplied.

OPENING/CLOSING THE MITRE SAW STAND

1. Push the locking pin in as you

swing the leg into position.

2. The leg should lock into place.

3. Test the stability of the table

before use.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ADJUSTING THE MITRE SAW STAND

ADJUSTING THE LEG HEIGHT

1. Press the locking pin shown and

pull the leg to the desired height.

• The locking pin must lock into

one of the holes on the leg.

• Make sure that the same hole is

used on each leg.

2. Repeat steps 1 to 3 with the

remaining legs.

3. Test the stability of the table before use.

ADJUSTING THE ROLLER LENGTH

1. Loosen the knob shown.

2. Slide the extension arm to the

required position.

3. Tighten the knob to lock in place.

ADJUSTING THE ROLLER HEIGHT

1. Loosen the knob shown.

2. Adjust the roller to the required

height.

3. Tighten the knob to lock in place.

ATTACHING THE MITRE SAW

1. Place the mitre saw in the middle of the table and secure to the table

using the fixings supplied.

Indice

Altri manuali Clarke Rack e supporto

Clarke

Clarke CMS1 Manuale utente

Clarke

Clarke LB7S Manuale di istruzioni

Clarke

Clarke CARS1 Manuale di istruzioni

Clarke

Clarke CSR4550BO Manuale utente

Clarke

Clarke CAX3TAB Manuale utente

Clarke

Clarke CAX3TBC Manuale utente

Clarke

Clarke CUTS1 Manuale utente

Clarke

Clarke CMSS Manuale utente

Clarke

Clarke CWC80B Manuale utente

Clarke

Clarke Strong-Arm CES680 Manuale del proprietario

Clarke

Clarke CGR1 Manuale utente

Clarke

Clarke CAX20S Manuale utente

Clarke

Clarke CSP420 Manuale utente

Clarke

Clarke CT100PR Manuale utente

Clarke

Clarke CWR45B Manuale di programmazione

Clarke

Clarke CSM4200 Manuale utente

Clarke

Clarke CSR4200 Manuale utente

Clarke

Clarke CBS3 Manuale utente

Clarke

Clarke CWMWR1 Manuale utente

Clarke

Clarke Strong-Arm CES450 Manuale utente

Clarke

Clarke LB5S Manuale di istruzioni

Clarke

Clarke CTA150 Manuale utente

Clarke

Clarke Strong-Arm CES340 Manuale utente

Clarke

Clarke CSM5175 Series Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente