Clarke CLS400 Guida di riferimento rapido

ASSEMBLY &

GC1015

OPERATING INSTRUCTIONS

400MM LOGSAW

MODEL NO: CLS400

PART NO: 3401995

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Log Saw.

The CLARKE CLS400 is a single speed circular saw directly driven by the motor.

It is equipped with a log cradle which holds the log steady while working and

has a hinged guard which retracts as the log is pushed against the saw.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

If disposing of this product or any damaged components, do not dispose of

with general waste. This product contains valuable raw materials. Metal

products should be taken to your local civic amenity site for recycling of metal

products.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY WARNINGS

WORK AREA

1. Keep the work area clean and well lit. Cluttered and dark areas invite

accidents.

2. Do not operate power tools in explosive atmospheres such as in the

presence of flammable liquids, gasses or dust. Power tools create sparks

which may ignite dust or fumes.

3. Keep children and bystanders away while operating any power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Power tools must match the power outlet. Never modify the plug in any

way. Do not use adaptor plugs with earthed (grounded) power tools.

Correct plugs and outlets will reduce the risk of electric shock.

2. Do not expose power tools to rain or wet conditions. Any water entering

power tools will increase the risk of electric shock.

3. Do not abuse the electrical cable. Never use the cable for pulling or

unplugging the power tool. Keep the cable away from sources of heat, oil,

sharp edges or moving parts. Damaged or tangled cables increase the risk

of electric shock.

4. Use outdoor extension leads. If working outdoors, always use an approved

cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as

that on the machine, or larger.

5. When using a cable reel, always unwind the cable completely. We strongly

recommend that this machine is connected to the mains supply via a

Residual Current Device (RCD).

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when you

are operating a power tool. Do not operate a power tool when you are

tired, ill or under the influence of alcohol, drugs or medication. A moment

of inattention may result in personal injury.

2. Wear personal protective equipment including eye protection. Safety

equipment such as a dust mask, non-skid shoes or hearing protection used

for appropriate conditions will reduce personal injuries. Use a face or dust

mask if operation is particularly dusty. Wear ear protectors/defenders as

the noise level of this machine can exceed 85dB (A).

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

3. Do not over-reach. Keep your proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

4. Concentrate on the job in hand, no matter how trivial it may seem. Be

aware that accidents are caused by carelessness due to familiarity.

5. Avoid accidental starting of the machine. Ensure the switch is in the off

position before plugging the machine in to the power supply. Plugging in

power tools that are switched on invites accidents.

6. Dress properly. Do not wear loose clothing or jewelry which may get

caught in moving parts. Wear protective hair covering to contain long hair.

For best footing, wear rubber soled footwear. Keep floor clear of oil, scrap

wood, etc.

7. Wear gloves while handling saw blades and always store them in the

protective packing provided. A dust mask should be warn to reduce the

inhalation of harmful dust.

8. Always remove and stack cut timber in a suitable place, away from the

operator.

9. Switch the machine OFF immediately after the task is completed.

POWER TOOL USE AND CARE

1. Do not force the machine. Use the correct tool for your application. It will

do a better and safer job at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the power tool from the power supply before making any

adjustments or storing the tool. These measures will reduce the risk of the

power tool starting accidentally.

4. Store power tools out of the reach of children and do not allow persons

unfamiliar with these instructions to operate this product. Power tools are

potentially dangerous in the hands of untrained users.

5. Maintain power tools in top condition. Keep machines clean for the best

and safest performance. Check for misalignment or binding of moving

parts, broken parts, or any condition that may affect the machine’s

operation. If damaged, have the machine repaired before use. Many

accidents are caused by poorly maintained power tools.

6. Machine cleanliness. Do not allow the ventilation slots in the motor to

become blocked with dust.

7. Check the power tool for damage before use. Any damaged part should

be inspected to ensure that it will operate properly and perform its

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

intended function. Any damage should be properly repaired or the part

replaced. If in doubt, DO NOT use the machine. Consult your local dealer

SERVICING

1. When necessary, have your power tools serviced or repaired by a qualified

person using identical replacement parts. This will ensure that the safety of

the power tool is maintained.

PRECAUTIONS SPECIFIC TO CIRCULAR SAWS

1. ALWAYS wear ear protectors/defenders during continuous use as the noise

level of this machine can exceed 85dB (A).

2. ALWAYS keep the mains cable well away from the saw and ensure an

adequate electrical supply is close at hand so that the operation is not

restricted by the length of the cable.

3. ALWAYS use only the correct blade for this saw and ensure the blade is fully

tightened before use. The blade must always be rated to operate at a

rotational speed equal to, or greater than that of the machine.

4. Beware of foreign objects. When cutting pre-used wood, ensure all nails

have been removed beforehand. Nails will damage the saw blade.

5. When switching off, remember that the blade will continue to rotate for a

short time after the stop button has been pressed to stop the saw.

6. NEVER operate the saw when the moving blade guard is not working

properly. The guard should be checked for correct operation before each

use. It must move freely and readily return to the starting position.

7. NEVER operate the saw without the removable blade guard being

installed correctly.

8. NEVER start the saw when the blade is in contact with the work.

9. DO NOT use the saw if the power cable, plug or motor is in poor condition.

10. ALWAYS ensure the workpiece is held securely when cutting by placing

securely in the log cradle to avoid loss of control.

11. ALWAYS hold the cradle handles with both hands to keep hands well away

from the saw blade.

12. Do not attempt to saw very small logs including those which cannot be

properly secured. Logs sizes are stated on page 20.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHANGING BLADES

1. Unplug the saw from the power supply before changing blades, and take

care to prevent entrapment of the fingers between the blade and the

inner guard. Ensure the blade is secure before use.

2. Use the appropriate saw blade for this saw. Correct blades are available

from your Clarke dealer as listed on page 18.

3. Only use saw blades in good working condition. Discard and replace

cracked or bent saw blades.

4. Always secure the blade using the wrenches supplied.

Please keep these instructions in a safe place for future reference.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY SYMBOLS & PICTOGRAMS

Please read all of the safety and operating instructions carefully before using

this product. The following safety symbols may be found on the product.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply

through an approved 13 amp BS1363 plug, or a suitably fused isolator switch.

If the plug has to be changed because it is not suitable for your socket or

because of damage, it must be removed and a replacement fitted, following

the wiring instructions shown below. The old plug must be discarded safely as

insertion into a power socket could cause an electrical hazard.

The wires in the mains lead should be

wired up in accordance with the

following colour code:

• Connect the GREEN & YELLOW

coloured wire to the plug

terminal marked with a letter E

or or coloured GREEN or

GREEN & YELLOW.

• Connect the BROWN coloured

wire to the plug terminal

marked a letter “L” or coloured RED

• Connect the BLUE coloured wire to the plug terminal marked a letter

“N” or coloured BLACK.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD). If you are not sure, consult a qualified

electrician.

DO NOT try to carry out any repairs yourself.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS

SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE

COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OVERVIEW

NODESCRIPTION NODESCRIPTION

1 Log Support Yoke 12 Log Cradle

2 Support Stand 13 Connecting Chain

3 Fixed Guard 14 Securing Knob

4 Moving Guard Other items supplied Loose

5 Log Stop Bar Guard Support Bracket

6 Protective Plate Saw Blade

7 Return Spring Assembly Blade Securing Discs (x2)

8 Motor Stand c/w motor Open Wrench

9 Handle (x2) Blade Locking Wrench

10 Connecting Plate On/Off Switch c/w Cable

11 Cradle Support Arm

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

When unpacking, check for damage or shortages etc. Any found should be

reported to your CLARKE dealer where the product was originally purchased.

ASSEMBLING THE SWITCH & STANDS

PARTS REQUIRED:

• ON/OFF Switch:- 4 x M4 x 55 mm screws & 4 x M4 washers

• Motor Stand/Support Stand: 2 x Spacers, 4 x M6 x 40 bolts, nuts &

washers, 2 x M8 x 80 bolts, nuts & washers, 2 x M8 x 60 bolts, nuts &

washers

• Connecting Plates:-2 x M8 x 40 bolts, locknuts and washers

Refer to the ‘Overview’ illustration

and to Figs 1 & 2.

1. Fit the ON/OFF switch to the Motor

Stand using the 4 x M4 x 55 mm

screws with washers as shown in

Fig 1.

2. Join the Motor Stand and Support

Stand together using the M8 x 80

bolts as shown in Fig 2, using the

spacers between the stand items.

3. Fit the Connecting Plates to the

Motor Stand and Support Stand,

using the M8 x 40 bolts, flat

washers and M8 locknuts.

INSTALLING THE FIXED GUARD

PARTS REQUIRED:

• Guard Support Bracket:- 2 x M8 x 15mm Bolts, Washers & Locknuts

• Fixed Guard:- 4 x 8mm washers & locknuts

Altri manuali per CLS400

Indice

Altri manuali Clarke Sega

Clarke

Clarke CCS185B Manuale di istruzioni

Clarke

Clarke Metalworker CCO14D Manuale di istruzioni

Clarke

Clarke Contractor CON185 Manuale di istruzioni

Clarke

Clarke Woodworker CBS250C Manuale di istruzioni

Clarke

Clarke contractor CON100 Manuale di installazione e funzionamento

Clarke

Clarke WOODWORKER CBS250 Manuale di installazione e funzionamento

Clarke

Clarke Woodworker MBS600C Manuale utente

Clarke

Clarke CTS16 Manuale di installazione e funzionamento

Clarke

Clarke CTS11 Manuale di installazione e funzionamento

Clarke

Clarke CAT118 Manuale di installazione e funzionamento

Clarke

Clarke WoodWorker CCS1 Manuale di installazione e funzionamento

Clarke

Clarke CLS405 Guida di riferimento rapido

Clarke

Clarke Contractor CCS2 Manuale di installazione e funzionamento

Clarke

Clarke DUO SAW Manuale di istruzioni

Clarke

Clarke CONTRACTOR CON850B Manuale di istruzioni

Clarke

Clarke Contractor CFIS 250 Manuale di installazione e funzionamento

Clarke

Clarke CPS160 Manuale di istruzioni

Clarke

Clarke Woodworker CTS10D Manuale di installazione e funzionamento

Clarke

Clarke CBS250B Manuale utente

Clarke

Clarke CBS7MB Manuale di installazione e funzionamento

Clarke

Clarke CCO14C Manuale di istruzioni

Clarke

Clarke Woodworker CSS400B Manuale

Clarke

Clarke CCS185 Manuale di istruzioni

Clarke

Clarke STRONG ARM CFPSM Manuale di istruzioni

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente