Clarke CVP1000 Guida rapida

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVP1000

PART NO:

PART NO: 6499640

Rotary Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump.

Suitable for use with water, petrol, diesel and xylol, (not suitable for use with acid, alkali and chemicals which are

corrosive to aluminium

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT

SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION.

Drum Connector Size 2" BSP

Max Flow Approx 24L/min

Inlet Tube Diameter 29 mm i/d (32mm o/d)

Outlet Tube Diameter 22 mm i/d (25mm o/d)

Dims (W x D x H) 190 x 240 x 1280 mm

Product Weight 2.6 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A DRUM

1. Assemble the pump using the handle, collar, spout and inlet tube supplied.

• The pump body is marked with IN for the inlet tube and with an arrow for the outlet tube.

• Use PTFE tape at all connections.

2. Fit the collar over the inlet tube before screwing the tube to the pump body.

3. Screw the collar into the threaded opening of the barrel.

4. Raise or lower the inlet tube so that it is just above the bottom of the drum when fitted. Set in position by tightening

the collar.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the outlet tube.

2. Rotate the handle to draw fluid from the drum.

• The first time you use the pump, it may take several turns of the handle before liquid begins to flow.

COMPONENTS SUPPLIED ASSEMBLED

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Clarke Pompa dell'acqua

Clarke

Clarke CSV4A Manuale di istruzioni

Clarke

Clarke SUBMERSIBLE PUMP Manuale di istruzioni

Clarke

Clarke CPRP560 Manuale di istruzioni

Clarke

Clarke DWP100A Manuale di istruzioni

Clarke

Clarke SWP900A Manuale di istruzioni

Clarke

Clarke Strong Arm CS10PRH Manuale di installazione e funzionamento

Clarke

Clarke DFT230 Manuale di istruzioni

Clarke

Clarke CSE400A Manuale di installazione e funzionamento

Clarke

Clarke BIP1000 Manuale di istruzioni

Clarke

Clarke MSP12 Manuale utente

Clarke

Clarke ISP11A Manuale

Clarke

Clarke CDDFTP Manuale utente

Clarke

Clarke EBP1100 Manuale di istruzioni

Clarke

Clarke CFTP12 Manuale di istruzioni

Clarke

Clarke CHF2 Manuale di installazione e funzionamento

Clarke

Clarke CVPW Guida rapida

Clarke

Clarke PW80A Manuale di istruzioni

Clarke

Clarke CBT1300SS Manuale di istruzioni

Clarke

Clarke TAM100 7230035 Manuale di installazione e funzionamento

Clarke

Clarke CM1 Manuale di installazione e funzionamento

Clarke

Clarke TAM101 Manuale di installazione e funzionamento

Clarke

Clarke ISP14A Manuale di installazione e funzionamento

Clarke

Clarke PSP195 Manuale di istruzioni

Clarke

Clarke IVP13A Manuale di installazione e funzionamento

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente