Clarke RWL36LI Manuale utente

INSTRUCTIONS FOR USE

GC1114

RECHARGABLE WORKLIGHT

MODEL NO: RWL36LI

PART NO: 4003050

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Worklight. Before attempting to use this

product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to your purchase giving you long and

satisfactory service.

CONTENTS

1 x 36 LED Worklight

1 x AC Mains Charging Adaptor

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste but according to the laws governing Waste Electrical and

Electronic Equipment (WEEE) at a recognised disposal facility.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TECHNICAL SPECIFICATION

OTHER WORKLIGHTS WITHIN THE CLARKE RANGE

Dimensions 250 x 60 x 60 mm

Weight 0.5 kg

Power Source 2 x Li-ion battery (7.4 V in total)

Waterproof No

Shock Resistant No

Rechargable Yes

Power adaptor

Input

Output

AC:100-240V/0.3A 50/60Hz

DC: 12V/500mA

Insulation Class II

Maximum Brightness 1600 lux

Charge Time 4.5 hours (nominal)

Approximate use from each charge 4 hours (single side)

2 hours (double side)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

Please read and understand the following instructions before use.

1. Do not shine the worklight into the eyes.

2. Ensure the worklight is fully charged before initial use.

3. Do not use the worklight during recharging.

4. Do not use the worklight if you suspect that the battery or the casing is

damaged.

5. Inspect the charger plug, cable and connector for damage to ensure

items are safe before connecting to the mains power supply. If damaged

do not use.

6. Check that the input voltage marked on the charger plug is the same as

the mains power supply to be used.

7. Do not disassemble the worklight for any reason.

8. Do not leave the battery in a discharged state, recharge the battery after

use.

9. Do not pull the charger from the mains socket by the lead.

10. Do not get the charger wet, or use in wet, damp conditions (the charger is

for indoor use only).

11. Never use any charger other than the one supplied with this product when

connecting to the power supply.

THE FOLLOWING SAFETY SYMBOLS ARE SHOWN ON THE PRODUCT.

Read this instruction

booklet carefully

before use.

Suitable for indoor use

only.

Do not immerse in

water.

Class II equipment with

no earth connection

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BATTERY CHARGING

1. Connect the AC charging

adaptor to the charging jack on

the worklight.

2. Connect the other end of the

charger to the 230V mains power

supply and charge until fully

charged.

• The LED will illuminate in red

when the lamp is charging.

• The LED will illuminate in green

when charging is complete.

• The worklight should not be

operated while using the

charger.

3. The battery must be re-charged

at least every 3 months. Failure to

re-charge the battery will lead to

reduced performance of the

worklight and to premature

battery failure.

NOTE: the batteries cannot be

replaced.

4. If you plan to store the worklight (e.g. for emergencies), we recommend

that the battery is fully charged before doing so, this will ensure the longest

possible battery life.

5. Never abuse the charger cable or yank the cable to disconnect it. Keep

the cable away from sharp edges/hot surfaces.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

1. Press the red button once to

switch on one side of the

worklight.

2. Press the red button a second

time to switch on the other side.

3. Press the red button a third time to

switch on both sides of the

worklight together.

4. Press the red button again to

switch the worklight off.

5. Press and hold the red button at

any time to make both sides of

the light flash. Press and hold

again to stop the flashing.

6. Press the black button at any time

to temporally switch the active

lamp off.

7. Never shine the light directly into

the eyes.

• Up to 4 hours of light can be

obtained before the batteries

are drained.

NOTE: when the battery is almost depleted, the LED will illuminate in red

for approximately 30 minutes before the worklight turns off.

8. Attach the worklight to a suitable support using either the folding or

extending hook or attach to a ferrous metal surface using the magnetic

retainer.

• To keep your worklight clean, wipe with a damp cloth only, DO NOT

use detergents, chemicals or harmful abrasives. Never immerse in

water.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY

Indice

Altri manuali Clarke Luce da lavoro

Clarke

Clarke SMD2700L Manuale utente

Clarke

Clarke SMD4500 Manuale utente

Clarke

Clarke SMD42T/110 Manuale del proprietario

Clarke

Clarke SMD42T Manuale del proprietario

Clarke

Clarke UBL1600R Manuale utente

Clarke

Clarke SMD84T/110 Manuale del proprietario

Clarke

Clarke CTL24/3 Manuale utente

Clarke

Clarke SMD42C Manuale del proprietario

Clarke

Clarke LED700SR Manuale utente

Clarke

Clarke HLC400/110 Manuale del proprietario

Clarke

Clarke HLC400 Manuale del proprietario

Clarke

Clarke COB10C Manuale del proprietario

Clarke

Clarke LED1000R Manuale utente

Clarke

Clarke CWLCOB3 Manuale utente

Clarke

Clarke COB10C/110 Manuale del proprietario

Clarke

Clarke SMD84T Manuale del proprietario

Clarke

Clarke HLC400T/110 Manuale del proprietario

Clarke

Clarke HLC400T Manuale del proprietario

Clarke

Clarke CFL20Li Manuale di istruzioni

Clarke

Clarke CL6FS Manuale utente

Clarke

Clarke RWL30 Manuale utente

Clarke

Clarke GWL700R Manuale utente

Clarke

Clarke COB10T Manuale del proprietario

Clarke

Clarke PL5R Manuale utente

Manuali Luce da lavoro popolari di altre marche

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuale utente

RTRMAX

RTRMAX RTX1868 Manuale utente

FeinTech

FeinTech LAL00220 Manuale utente

Bunker Hill Security

Bunker Hill Security 64735 Manuale utente

Goobay

Goobay 30450 Manuale utente

REV Ritter

REV Ritter SPOT Manuale utente

Ignition

Ignition Stagepix Line 100 IP Manuale utente

SCANGRIP

SCANGRIP DUO CONNECT Manuale utente

Bosch

Bosch GLI 18 V Manuale utente

Bayco

Bayco SL-1514 Manuale utente

EUFAB

EUFAB SMD LED 8+1 Manuale utente

DeWalt

DeWalt DCL510 Manuale utente

PowerSmith

PowerSmith PWLD080T Manuale utente

MaxLite

MaxLite 73683 Manuale utente

Heitronic

Heitronic Trend 27867 Manuale utente

Monzana

Monzana Gore MZCL10 Manuale utente

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuale utente

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuale utente