Clear Dash HD X3000 Manuale utente
Owner’s
Manual
High-Denition
Automotive
Video Recorder
Warranty Information Inside
CDHD-X3000_IB_TP_ENG_V1_170302.indd 1 3/3/17 4:38 PM
CDHD-X3000_IB_TP_ENG_V1_170302.indd 2 3/3/17 4:38 PM
1
Congratulations…
On your purchase of the Safe Driving Dash Recorder. Dashboard mounted cameras are
becoming increasingly popular as a tool for recording car journeys, both for fun and purposes
of documentation should an unanticipated event happen while you are driving. Questions of guilt,
innocence or liability can easily be determined when a recorded version of an event is available.
Documented proof of events can reduce fraudulent insurance claims.
Statistics indicate a signicant reduction in accidents when cars are equipped with video recorders.
CDHD-X3000_IB_TP_ENG_V1_170302.indd 1 3/3/17 4:38 PM
2
Notice: Windshield Mounting Legal Restrictions
Before mounting Clear Dash HD on windshield, consult state and local ordinances. Some
states may outlaw suction mounts while driving or regulate where suction mounts are located
in your vehicle. Many states have restrictions against “non-transparent material” on a car
windshield that may obstruct the driver’s view.
Warning: This product and its components contain chemicals known to the state of
California to cause cancer, birth defects, or reproductive harm. This Notice is being provided
in accordance with California’s Proposition 65. If you have any questions or would like
additional information, please refer to www.oehha.ca.gov/ prop65/background/p65plain.html.
Ensure proper disposal of the rechargeable battery.
The battery contained in this device is lithium ion. To locate a battery recycling center
near you, call 1-800-8-BATTERY or 1-877-2-RECYCLE for proper disposal.
IMPORTANT SAFETY INFORMATION
• Do not expose Safe Driving Dash Recorder to rain or moisture.
• Safe Driving Dash Recorder is intended for use in a motor vehicle. Do not install the product
where it will block the driver’s view of the road (including mirrors) or the deployment of airbags.
• Keep your attention on the road! Do not try to operate or focus on device while driving. If you
have to concentrate on or adjust the device, pull over to the side of the road for a moment.
• Make sure the camera lens is kept clean and there is nothing blocking the lens.
• Do not leave Safe Driving Dash Recorder in direct sunlight for a long period of time or where
the temperature could go above 140°F (60°C).
CDHD-X3000_IB_TP_ENG_V1_170302.indd 2 3/3/17 4:38 PM
Mounting Bracket:
Slide Bracket on to back
of Dash Cam
3
14
17
2 31
18
4 5
6
8
7
10
9
13
12
11
16
15
Clear Dash HD Features & Functions
1. Menu
2. Photo / Play Back
3. Enter / File lock
4. Video Record/Stop/ Up
5. Sound Record/ Down
6. REC Indicator Light
7. Charging Indicator Light
8. MIC Indicator Light
9. AV OUT
10. MIC
11. Micro Memory Card Slot
12. USB Interface
13. Reset Button
14. On/Off Button - day/night
15. Speaker
16. Dash Mount Slot
17. LED Highlight
18. Rotating Camera Lens
CDHD-X3000_IB_TP_ENG_V1_170302.indd 3 3/3/17 4:38 PM
3
2
1
4
4
INCLUDES:
1. Power Port Car Charger with Mini USB Cable
2. Micro Memory Card -8Gb
3. USB to Mini USB Charging Cable
4. Suction Dash Mounting Bracket
Clear Dash HD
Accessories
CDHD-X3000_IB_TP_ENG_V1_170302.indd 4 3/3/17 4:38 PM
5
Clear Dash HD
Screen Features
Mode
Battery Charge
Date & Time
MM/DD/YYYY
Day/Night
Setting
Memory Card
Video
Resolution
Recording
Time
File Lock
Mic
G Sensor “on”
Cyclic Record
Exposure
Recording
Active
CDHD-X3000_IB_TP_ENG_V1_170302.indd 5 3/3/17 4:38 PM
6
Clear Dash HD
Operating Instructions
Getting Started
1. Insert memory card into memory card
slot.
2. Mount unit on dash or window of vehicle
with camera lens facing the area to be
recorded.
Mounting to Dash with Suction Cup
a. Attach Safe Driving Dash Recorder
to the suction mount by sliding the
square mounting post into the mount
slot on the cam.
b. Locate a suitable position to mount
the dash cam. Do not obstruct
visibility for driving.
A smooth surface is needed for
suction cup to secure properly.
c. Make sure surface is clean as well as
suction cup.
d. Press suction cup to surface. Lock
lever in place.
e. Test mount to make secure. If loose,
repeat process.
3. Connect unit to power supply. Using
the power port cable, plug the USB
end into the X-3000 and the other end
into the Car Power port. The USB cable
can also be used to plug into the
X-3000 and a USB power adapter or
USB connection.
The red Charging light (7) will illuminate
and charge the unit’s battery while it
operates on the car’s electrical power.
The light will remain on while charging.
4. Unit should power up. If “Welcome”
screen does not appear, press and hold
ON/OFF (15) button for a few seconds
to turn on.
CDHD-X3000_IB_TP_ENG_V1_170302.indd 6 3/3/17 4:38 PM
7
*While using the car power port
charging cable, the X-3000 will power
up and start recording.
Screen appears with 3 options.
Mass Storage
PC Camera
Rec mode
5. Scroll Down using Down key (5) key to
select Rec mode. Press Enter Key (3).
6. Press Video Rec Key (4) to start/stop
recording. Check video screen and
adjust unit position for best picture
recording. Video timer in upper left
corner will start to count. Blue record
light (6) will blink when recording.
Charging
Plug the power port cable into the USB port
on the X-3000. The charging light (7) will
illuminate. Charging light indicator will turn
off after fully charged.
Battery Use
Charge the internal battery as per
instructions above. The charge of the
battery can be seen by the battery strength
meter located on the screen in the lower
right corner.
Date & Time
Press Menu button once to enter Menu
Mode. Press again to advance to Video
Settings. Select Date/Time by pressing
enter. Adjust Date/Time by highlighting
elds and using up/down key to correct
date. Press Enter.
Modes of Operation:
Recording Video/DVR
Make sure unit is powered on. Press
Rec Key (4) to Start or Stop of
recording. Recording time can be
viewed in top right corner of the screen.
Files will be saved in time intervals set
in the Menu settings. Default is 1 minute
les. When power to the unit is turned
off, recording will be saved
automatically. Once memory card in full,
les will be rewritten from oldest one by
one. Except the locked le.
CDHD-X3000_IB_TP_ENG_V1_170302.indd 7 3/3/17 4:38 PM
8
Photo/Camera
Make sure unit is powered on. Press the
Photo/Playback Key (2) to switch to the
Photo/Camera mode. Press Key (2)
again to take photo.
Playback/ Preview Delete les
Make sure unit is powered on. Hold and
press the Photo/Play Key (2) to enter
into playback mode. Press down (5)
or up Key (4) to scroll though saved
les. Press enter button (3) to play
le. Press Down button (5) to fast
forward at 2x, press again for 4x, press
again for 8x.Up button (4) can be
pressed to rewind -2x, press
again -4x, press again -8x.
Audio Record
Make sure unit is powered on. Press
the Audio Sound Key (5) to activate
microphone. Yellow Light (8) will
illuminate.
Switching between modes
Recording mode to Photo mode- Press
Photo Key (2).
Photo mode to Recording mode- Press
Video Key (4)
Playback mode to Photo mode- Press
and hold Photo Key (2).
Audio Record - press Audio Sound Key
(5). Toggle to turn off and on.
Panel Protect
This is the power saving screen.
Settings can be adjusted in the Main
Menu. Off setting will keep main screen
active continuously. Pressing any button
will activte the main screen. Default is 30
sec in order to limit distraction on driver.
Saving Files to PC
There are two methods to save les to PC.
From Micro Memory Card:
1) Remove Micro SD card and place in
card reader.
2) Find device and open folder for les.
3) Copy/save les to PC.
CDHD-X3000_IB_TP_ENG_V1_170302.indd 8 3/3/17 4:38 PM
Indice
