CODELOCKS CL400 Manuale utente

24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 1/7

Home (/) > Knowledge Base - Home (/knowledgebase/) > KA-01068

CL400 - Code Change Instructions

Many Codes to Choose From

The CL400 code chamber (CL410 and CL420) consists of 13 buttons from which the code is selected, and a

‘C’ button which is used to re-set the chamber after an incorrect entry, and which must always be used as

the first digit of a code. Buttons may only be used ONCE in a code. For example, 1212 is not possible.

A CL400 code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or

whatever sequence is most convenient to remember. With 13 buttons, a total of 8,191 different codes are

available, any of which can be entered in any sequence.

The total is arrived at as follows:



24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 2/7

Most people will set a code in the range of 4 to 7 digits, and the total number of codes in this range is

5,434. The lock is factory set with a randomly selected 5 digit code starting with the ‘C’ button. The code is

not recorded by the factory. The code can be changed as often as required to any other 5 digit code. Every

new code must start with the ‘C’ button. Using the spare tumblers, the code length can be changed to 4 or

6 digits. Shorter codes are possible, but 1 or 2 digit codes are not recommended.

Note: CL415 and CL425 have 12 coded buttons giving 4,095 different codes.



Code Change Instructions

NOTE: On CL415 and CL425:

A) Press the ‘Y’ button and the ‘C’ button to ensure that the lock is not in Code Free Access mode.

B) When changing code do not reposition Y tumbler.

1. Take your CL400 lock off the door by unscrewing the 2 bolts in the back plate.

2. Press the C button to reset the chamber and place the lock case on a flat surface with the buttons down.

3. Remove the 2 red screws and carefully lift off the code chamber plate. Check that all 14 springs are held

in place on the plate.

4. Note that the coloured code tumblers correspond in position to the existing code. The silver tipped non-

code tumblers fill the other positions. The C tumbler is not coloured.

NB: Holding the C button depressed whilst repositioningthe tumblers is ESSENTIAL to avoid

damaging the internal mechanism.DO NOT attempt to reposition the C tumbler.



5. Hold the lock in your hand and depress the C button. Keeping the C button depressed use tweezers to

reposition the tumblers to correspond with your new code. The square notches of ALL tumblers MUST face

outwards, with the square tips ON TOP: See diagram below. DO NOT force the tumblers in.

6. Replace the code chamber plate carefully with the 2 red screws.

24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 3/7

7. Check the operation of the new code, and make a written note of it before reinstalling the lock.



MAINTENANCE

No maintenance of the working parts is necessary. DO NOT OIL.

To maintain the finish the lock should be cleaned regularly with a soft cloth. A silicone spray or similar,

should be used to provide a protective film against grit and grime.

GUARANTEE

If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the

Codelocks helpline and arrange for it to be repaired free of charge.



24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 4/7



24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 5/7

Features

Medium-duty mechanical locks with full size lever handles.

Code Free Access mode by pressing the ‘Y’ code free button after entering the code (CL415 and

CL425 only). Reset by pressing the ‘Y’ button and then the ‘C’ button.

Inside handle always retracts the latch for exit.

Stainless steel and polished brass finishes available.

Reversible handles.

Easy code change as often as required.

Fit doors between 35mm (⁄”) - 60mm (2 3/8”) thick



Features - Model 420/425 Only

Split follower lock enables inside handle to retract latch and deadbolt simultaneously. Prevents

accidental lock-ins

Deadbolt thrown by key to lock out code users after work hours

Key will retract the latchbolt giving access for admin functions

Double Euro-profile cylinder with 3 keys. Any Euro-profile cylinder may be used excluding thumb

turn version.

On multiple door installations consideration should be given to having all cylinders keyed alike, with

restricted key issue, for ease of management



Back to Back Version Only

Two coded plates are provided to allow coded access in both directions.

Butterfly spindle not required.

For doors hung on the right, fit the silver spindle in the front keypad and the coloured spindle in the

opposite side.

For doors hung on the left, fit the coloured spindle in the front keypad and the silver spindle in the

opposite side.



CL420 / CL425 Only

Split follower lock enables inside handle to retract latch and deadbolt simultaneously. Prevents

accidental lock-ins.

Deadbolt thrown by key to lock out code users after work hours.

Key will retract the latchbolt giving access for admin functions.

Double euro profile cylinder with 3 keys. Any euro profile cylinder may be used excluding thumb turn

versions.

24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 6/7

On multiple door installations consideration should be given to having all cylinders keyed alike, with

restricted key issue, for ease of management.



CC-CL400-v1:0218

24/9/2561 KA-01068 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01068/en-us 7/7



Keywords: Lock Locks Code CodeLock CodeLocks Program Programming Instruction Instruct Help

Support Troubleshoot Troubleshooting Sequence Sequences Install Installation Parameters Settings

Setting Parameter Setting Set up Mechanical CL 400 CL400 Code Change

Altri manuali per CL400

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CODELOCKS Serratura

CODELOCKS

CODELOCKS KL1050 C2 Manuale utente

CODELOCKS

CODELOCKS CL250 Guida per l'amministratore

CODELOCKS

CODELOCKS CL50 Manuale utente

CODELOCKS

CODELOCKS CL2000 Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS CL100 Manuale utente

CODELOCKS

CODELOCKS CL1200 Manuale utente

CODELOCKS

CODELOCKS KL1000 G3 NetCode Manuale utente

CODELOCKS

CODELOCKS CL4500 Manuale utente

CODELOCKS

CODELOCKS CL1000 Manuale utente

CODELOCKS

CODELOCKS 4000 Series Manuale utente

CODELOCKS

CODELOCKS CL5500 SERIES Manuale utente

CODELOCKS

CODELOCKS KL1000 NetCode Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS KL1050 Manuale utente

CODELOCKS

CODELOCKS CL5020 Manuale utente

CODELOCKS

CODELOCKS KitLock Slam Latch Manuale utente

CODELOCKS

CODELOCKS Kit-Lock KL1100 Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS Pushbutton 500 Series Guida rapida

CODELOCKS

CODELOCKS CL600 Manuale utente

CODELOCKS

CODELOCKS CL5000 Manuale utente

CODELOCKS

CODELOCKS CL5500 SERIES Manuale utente

CODELOCKS

CODELOCKS CL500 Istruzioni operative e di manutenzione

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente