CODELOCKS KL1000 NetCode Manuale utente

https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1060-getting-started-installation-instructions-and-quick-start-guide

Codelocks Support

KL1000 NetCode - Getting Started Installation

Instructions and Quick Start Guide

The KL1000 NetCode supports date/time sensitive NetCodes which can be generated viathe NetCodePortal.

You must have access to a browser with internet access to set-up NetCode.



Special Notes

Please read carefully:

Before installing the lock, load the batteries and familiarise yourself with the operation and programming.

The handle will not turn until you enter the factory default Master Code 11335577 or the User Code 2244.

Visitwww.codelocksportal.netto proceed with the set-up. Note that you will need to register for an account

if you do not already have one.

Once signed-in, chooseAdd Lock. As part of the initialisation process, you will be given a program string

to enter into your lock. When displayed, this should be entered immediately.

Your KitLock is supplied ready to fit to doors up to 19mm (3⁄4") thick. For doors between 19mm (3⁄4") and

25mm (1") thick, you will need to install the 28.5mm (11⁄8") spare spindle (see below). A 12mm (1⁄2")

spindle is also included for sheet metal doors.

https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1060-getting-started-installation-instructions-and-quick-start-guide



Public & Private Functions

Although the KL1000 NetCode is intended as a NetCode lock, the KL1000 NetCode does support traditional

Public & Private Functions. Documentation for these functions can be found at www.support.codelocks.com



Factory Reset

You may need to reset your lock to factory settings if you want to re-register the lock on the NetCode Portal or

have forgotten the Master Code.

1. Remove the rear-fixing bolt and swing the lock over the edge of the door to reveal the battery compartment.

2. Remove one battery.

3. Press and hold the1button.

4. Replace the battery whilst continuing tohold the1button. The Blue LED will flash twice.

5. Release the1button.

6. Within three seconds, press the1button three times. The Blue LED will flash three times and the lock will

have reverted to factory settings. The Master Code will now be11335577,the lock will be in Private

Function and the User Code will be 2244.All other settings will be erased and reset.



Installation Guide Steps

KL1000 NetCode can be fitted to:

A. Cabinets, cupboards and lockers etc. as a direct replacement for existing cam locks.

B. It can also be fitted easily to cupboards and cabinets that do not have an existing locking device.

KL1000 NetCode can be supplied vertically and left or right hand horizontal.

https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1060-getting-started-installation-instructions-and-quick-start-guide



A. Replace existing cam lock with KL1000 NetCode

1. Remove existing cam lock.

2. Place the 16mm (5⁄8") template hole over the hole left by the cam lock and mark the upper fixing hole.

3. Drill the 6mm (1⁄4") fixing hole.

4. Fit the KitLock to the door by passing the spindle through the 16mm (5⁄8") hole.

5. If required, from the inside of the door, pass either of the packing pieces over the spindle to centralise the

lock.

6. Now secure the lock by threading the large nut onto the spindle.

7. Fit one of the upper fixing bolts to suit your door thickness.

8. Tighten the lower fixing nut and upper bolt.

9. Select the cam which suits your door and frame and attach it to the square shaft at the end of the spindle.

10. Now check the operation of the lock using the factory User Code 2244.

11. If the lock is functioning correctly, CHANGE THE DEFAULT MASTER CODE 11335577 AND

DEFAULT USER CODE 2244 and program the lock using the programming and operating instructions

found at www.support.codelocks.com



B. New Installation

1. Place template on door and mark upper 6mm (1⁄4") hole and lower 16mm (5⁄8") hole.

IMPORTANT NOTE: Before drilling fixing holes, please ensure the position of the KitLock when fitted

will allow enough clearance for selected cam to work.

2. Drill both fixing holes.

3. Continue to installation from 4 to 11 above.



GSII-KL1060NC-v2:0416



Indice

Altri manuali CODELOCKS Serratura

CODELOCKS

CODELOCKS CL50 Manuale utente

CODELOCKS

CODELOCKS CL100 Manuale utente

CODELOCKS

CODELOCKS CL2000 Manuale utente

CODELOCKS

CODELOCKS Kit-Lock KL1100 Manuale utente

CODELOCKS

CODELOCKS CL400 Manuale utente

CODELOCKS

CODELOCKS CL5510 Manuale utente

CODELOCKS

CODELOCKS CL6010 Manuale utente

CODELOCKS

CODELOCKS CL210 Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS NANO90 Manuale utente

CODELOCKS

CODELOCKS CL1200 Manuale utente

CODELOCKS

CODELOCKS Kit-Lock KL1100 Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS CL5500 SERIES Manuale utente

CODELOCKS

CODELOCKS CL1000 Manuale utente

CODELOCKS

CODELOCKS CL4510 Manuale utente

CODELOCKS

CODELOCKS CL300 Manuale utente

CODELOCKS

CODELOCKS CL500 Istruzioni operative e di manutenzione

CODELOCKS

CODELOCKS CL5000 Manuale utente

CODELOCKS

CODELOCKS CL500 Manuale utente

CODELOCKS

CODELOCKS CL600 Manuale utente

CODELOCKS

CODELOCKS CL255 Guida per l'amministratore

CODELOCKS

CODELOCKS CL200 Manuale utente

CODELOCKS

CODELOCKS KitLock Slam Latch Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente