Cognex DataMan 8000 Series Manuale utente
COGNEX®
DataMan®8000 Series
Quick Reference Guide
ii DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide iii
Getting Started About DataMan 8000 • DataMan 8000 Accessories •
Physical Layout of the Reader and the Base Station Page 4
1
DataMan 8000 Software Overview of Setting Up the Reader • Install DataMan
8000 Software • Start the Setup Tool • Use the Setup
Tool Menu Bar Page 10
2
Connection Options Connecting through Ethernet • Troubleshooting an
Ethernet Connection • Connecting through RS-232 •
Keyboard Emulation • Connecting through USB
3
Using DataMan 8000 Series
Wireless Readers
Connecting to a Wireless DataMan 8000 • Base Station
Routing Capabilities • Buffering Data • Charging •
Changing Batteries
4
Industrial Protocols,
Compliance Information,
Warnings and Notices
Industrial Protocols • DataMan 8000 Reader and Base
Station Specications • Laser Information • Agency
Compliance Statements
6
Reading Codes with the
DataMan 8000
Field of View and Reading Distances • Trigger Types
5
Page 16
Page 26
Page 41
Page 45
ii DataMan 8000 Quick Reference Guide
Ethernet RS-232 USB Wireless
4 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 5
About DataMan 8000
The DataMan 8000 series of readers offers the industry’s most advanced
technology for reading 1D and 2D codes regardless of size, quality, printing
method or surface, and is the only handheld ID reader that offers Industrial
Ethernet communication and liquid lens technology.
The DataMan 8000 series is available in two models, each with patented
1DMax and 2DMax algorithms, liquid lens technology, and future-proof modular
communication slide-ins with optional Industrial Ethernet capability.
The DataMan 8500 readers use Cognex’s patented
UltraLight® technology for superior image formation
on any mark type and surface. UltraLight illumination
provides dark eld, bright eld and diffuse lighting all
in one electronically controlled light.
The DataMan 8100 readers feature integrated bright
eld illumination ideal for applications that require
superior performance without specialty lighting.
Both models are available with the following communication options:
An intelligent base station is also provided when the DataMan 8000
reader uses the wireless communication module. The base station acts
as a router between the reader and your computer or network.
POE Adapter
CPS-AC-POE1A-xx
Serial/USB slide-in
DMCM-SERIALM-00
Ethernet slide-in
DMCM-ENETM-00
Wireless slide-in
DMCM-WLESSM-00
Intelligent Base Station
DMA-IBASE-00
Wall Mount
DMA-WALL-8000-00
Power Supply for base
station
DMA-24VPWR-xx
Power Supply for
reader
DM100-PWR-00
POE Adapter
CPS-24V-POE1
POE Adapter
CPS-24V-POE4
Battery for the wireless
reader
DMA-HHBATTERY-00
Stand
DM-STAND-00
RS-232 coiled cable
for reader, 2.5 m
DM8000-RS232-02
RS-232 coiled cable
for reader, 5 m
DM8000-RS232-05
USB cable, 2.5 m
DM8500-USB-02
USB coiled cable,
2.5 m
DM8000-USBC-02
Ethernet cable, 5 m
DM8000-ECABLE-05
Ethernet cable, 30 m
DM8000-ECABLE-30
PS/2 adapter cable
DM700-PS2-00
DataMan 8000 Reader Cables
DataMan Base Station Cables
RS-232 cable for
base station, 5 m
DMA-RS232-05
• USB cable for base station: Use any standard USB-A to USB-B 2.0
cable up to 3 meters
• Ethernet cable for base station: Use any standard CAT5/5e, SF/FTP
or S/FTP cable
Ethernet cable, 2.5 m
DM8000-ECABLE-02
6 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 7
DataMan 8000 Accessories DataMan 8000 Accessories: Cables
Laser aimer
UltraLight
(DataMan
8500 only)
Lanyard hook
Indicator Light
Trigger
(press and
hold to read)
Communication
module
Connection point with
the reader:
• pairing reader and
base station
• non-wireless
communication
• charging
RS-232 USB
Ethernet (with
optional Class
3 PoE power)
power plug (24V,
max. 13W)
spare battery charger
status indicator
base station
status indicators
spare battery
charger
Communication module
insertion point
8 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 9
Physical Layout of the Reader
LASER LIGHT, DO NOT STARE INTO BEAM
Physical Layout of the Base Station
To be able to connect to your reader or base station on your computer, you
must perform the following steps:
1. Install the Setup Tool on your computer.
2. Select the connection type: Ethernet, Serial, or USB.
3. Connect the appropriate cabling.
4. Power on your device(s).
Ethernet RS-232 USB
10 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 11
Overview of Setting Up the Reader
RS-232/USB
connection
Install DataMan 8000 Software
1. Check the DataMan Release Notes for a full list of system
requirements.
2. Insert CD-ROM and follow the on-screen prompts.
3. Connect the DataMan 8000 to your PC.
4. Launch the Setup Tool and click Refresh. The reader or the base
station appears under COM ports or Network devices.
5. Select a COM port or a Network devices listing and click Connect.
Ethernet connection
“DM8_00” with last 6
characters of MAC address,
printed on back of the reader
or the base station
12 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 13
Latest image Context based help
Connection status/Signal strength
Battery level indicator
Start the Setup Tool
Connect the reader to the Setup Tool to
congure it with the type of symbologies
it will decode as well as other parameters,
such as the type of trigger it will use and the
format of the results it will generate.
Alternatively, congure your reader
by scanning the appropriate reader
conguration code from the Reader
Conguration Codes document, available
through the Windows Start menu.
Trigger button
Read history
Quick Setup
Congure your reader in a few basic steps
Connect to Reader
Establish a connection to the reader
Results Display
View results
Light and Imager Settings/
UltraLight Settings
Choose a trigger type and other acquisition
parameters
System Settings
Congure visual and audio feedback, trigger
and output actions
Use the Edit menu for standard Cut, Copy and Paste operations.
Use the View menu to view reader information (serial number, rmware
version, and so on) and to enable and disable various elements of the
Setup Tool, and the Tasks menu to switch between various Setup Tool
options.
Use the System menu to manage the current settings on the reader
and to upgrade the features it currently supports:
14 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 15
System Menu
Save Settings Save the current parameters to non-volatile
memory, which allows the reader to restore
these settings each time you reboot it.
Reset Conguration Reset all conguration parameters in RAM
(volatile memory) to the default settings
except for communication settings.
Update Firmware Update the reader software.
Upload Feature Key Unlock additional features available in the
reader software if you have the right key.
Use the Help menu to display Setup Tool version information.
Use the Setup Tool Menu Bar
Each reader can store its current set of runtime parameters to a conguration
(.cfg) le, which contains information such as the enabled symbologies and
how any output data should be formatted.
The same conguration le can be loaded onto multiple readers, as the le
does not contain identication information such as the IP address or device
name of the reader used to create it.
A reader can also generate a Cognex device conguration (.cdc) le, which
stores the set of runtime parameters plus any identication data, such as
the name of the device, its IP address, subnet mask, and so on. Cognex
recommends generating a device conguration le for each reader to allow you
to restore a reader to its operating state with minimal effort.
Use the File menu of the Setup Tool to manage .cfg and .cdc les:
File Menu
Open Conguration Open a saved .cfg conguration le.
Save Conguration Create a .cfg conguration le of current runtime
parameters.
Print Conguration Code Generate a programming codes sheet
representing your reader’s conguration.
Restore Device Load a saved device conguration .cdc le,
with run-time parameters plus device-specic
information for a particular DataMan 8000.
Backup Device Create a device conguration .cdc le for a
specic reader.
Save Image Save the latest acquired image with .jpg le
format.
Troubleshooting an Ethernet Connection
WARNING
Disconnect DataMan from power before inserting/removing
communication modules.
2. With a 2 mm
Allen Wrench,
tighten the
screws so that
the slide-in is
rmly locked.
3. Insert the plug and slide
the cable lock up to the
reader and twist the cable
lock in place.
Use the DM8000-ECABLE-05 (5 meters) or the DM8000-ECABLE-30 (30 meters).
You also need a Power Over Ethernet Adapter (CPS-AC-POE1A-xx).
location of the
two screws
16 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 17
If your reader does not appear in the Setup Tool’s list of network
devices, you may need to adjust your network settings.
First check your Ethernet connection and click Refresh in the Setup
Tool. Next, scan the Enable DHCP code below (which you can also
nd in the DataMan Reader Conguration Codes document available
from the Windows Start menu). This might allow the reader to acquire
a suitable IP address from a DHCP server on your subnet.
If the reader still does not appear, you can use either the Add Device
or Force Network Settings options in the Setup Tool.
If you know the IP address of the reader, use the Add Device option.
If you do not know the IP address, use the Force Network Settings
options. Either method should allow the DataMan 8000 reader to
appear in the list of Network devices so that you can connect to it
through the Setup Tool and your Ethernet connection.
If none of the above helps, reset your reader to factory defaults by
scanning the Reser Scanner to Factory Defaults code below.
Enable DHCP Reset Scanner to
Factory Defaults
Connecting a DataMan 8000 through Ethernet
1. Connect the
Ethernet slide-
in (DMCM-
ENETM-00) to
your DataMan
8000.
1
Observe the following electrical requirements:
WARNING
For proper RS-232
operation, do not apply
any voltage to pin 9.
WARNING
Disconnect DataMan from power before inserting/removing
communication modules.
Use the DM8000-RS232-02 cable (2.5 meters) or the DM8000-RS232-05 cable
(5 meters). For power supply, use the DataMan 8000 Power Supply (DM100-
PWR-000).
Power on the RS-232 cable can be supplied by either the DC Power Plug
or Pin 1 of the D-SUB. DO NOT use both in parallel.
18 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 19
5 GND
9 Reserved
4 N/C
8RTS
3 RxD
7 CTS
2 TxD
6 N/C
1 VCC PWR
VCC
GND
1. 6VDC power supply (DM100-PWR-000), a 5.5mm x 2.1mm DC Power
Plug
2. VCC = +4.75V up to +6.0V for 2.5 m cable
VCC = +5.5V up to +6.0V for 5.0 m cable
2
Connecting a DataMan 8000 through RS-232
2. With a 2 mm Allen
Wrench, tighten
the screws so
that the slide-in is
rmly locked.
3. Insert the plug and slide
the cable lock up to the
reader and twist the cable
lock in place.
1. Connect the
serial slide-
in (DMCM-
SERIALM-00) to
your DataMan
8000.
location of the
two screws
Altri manuali per DataMan 8000 Series
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Cognex Lettore di codici a barre
Cognex
Cognex DM 8072DL Manuale utente
Cognex
Cognex DataMan 50 Manuale utente
Cognex
Cognex DataMan 475 Manuale utente
Cognex
Cognex DataMan 300 Series Manuale utente
Cognex
Cognex DataMan 70 Manuale utente
Cognex
Cognex DataMan 470 Series Manuale utente
Cognex
Cognex DataMan 8600 Series Manuale utente
Cognex
Cognex In-Sight 2800 Series Manuale utente
Cognex
Cognex DataMan 7550 Manuale utente
Cognex
Cognex DataMan 8700 Manuale utente
Cognex
Cognex DataMan 8600 Series Manuale utente
Cognex
Cognex DataMan 60 Series Manuale utente
Cognex
Cognex DataMan 8050 Manuale utente
Cognex
Cognex In-Sight SnAPP Series Manuale utente
Cognex
Cognex DATAMAN 500 Manuale utente
Cognex
Cognex DataMan Guida per l'amministratore
Cognex
Cognex DataMan 50 Series Manuale utente
Cognex
Cognex DataMan 50 Manuale utente
Cognex
Cognex DataMan Istruzioni operative
Cognex
Cognex DataMan 300 Series Manuale utente
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
