Colorlight Calibration Pro Manuale utente
Calibration Pro User Manual
Calibration Pro
Calibration Pro User Manual
Content
1. Introduction ............................................................................................. 1
1.1 Operational environment .............................................................. 1
1.2 Camera assembly .......................................................................... 3
1.2.1 Open the tripod ...................................................................3
1.2.2 Head Installation ................................................................ 3
1.2.3 Lens Installation .................................................................4
1.2.4 Camera Installation ............................................................ 6
1.3 Installation and un-installation ......................................................8
1.3.1 Installation ..........................................................................8
1.3.2 Un-installation ..................................................................10
2. Calibration Instruction ...........................................................................11
2.1 Software interface ....................................................................... 11
2.2 Homepage....................................................................................12
2.2.1 New project ...................................................................... 12
2.2.2 Language and help ........................................................... 12
2.2.3 Open Project .....................................................................13
3. Integrated calibration ............................................................................ 13
3.1 Configure the screen ................................................................... 13
3.2 Create a New Calibration ............................................................13
3.3 Connect to Server ........................................................................19
3.4 Screen display ............................................................................. 20
Calibration Pro User Manual
3.4.1 Display with sender card ..................................................20
3.4.1.1 Sender Card Setting .............................................. 21
3.5 Basic parameter setting ............................................................... 23
3.6 Camera preparation ..................................................................... 29
3.7 Camera adjustment ......................................................................30
3.7.1 Auto adjustment ............................................................... 30
3.7.2 Auto adjustment ............................................................... 33
3.7.2.1 canon auto adjustment .......................................... 33
3.7.2.2 CCM auto adjustment ...........................................33
3.7.2.2.1 Regular screen auto adjustment .................33
3.7.2.2.2 Second Calibration auto adjustment ..........34
3.7.2.2.3 Chip Low Brightness auto adjustment ...... 36
3.7.3 Manual adjustment ...........................................................38
3.7.3.1 canon manual adjustment ............................. 38
3.7.3.2 CCM adjustment ...........................................40
3.7.3.2.1 Regular screen manual adjustment ....40
3.7.3.2.2 Second Calibration manual adjustment41
3.7.3.2.3 Chip Low Brightness Calibration
manual adjustment ............................................ 42
3.8 Effect Debug ............................................................................... 43
3.9 Shooting photos part ................................................................... 44
3.9.1 Shooting photos part ................................................ 44
Calibration Pro User Manual
3.9.2 Effect Evaluation ..................................................... 47
3.10 Generate coefficient .................................................................. 49
3.10.1 Brightness extraction ..................................................... 49
3.10.2 Generate coefficient .......................................................50
3.10.3 Eliminate Camera Dust And Worms ..............................54
4. Single cabinet calibration ......................................................................56
4.1 Create single cabinet calibration .................................................56
4.2 Capture Gray Setting ...................................................................57
4.3 Shooting process ......................................................................... 59
4.3.1 Camera adjustment ...........................................................59
4.3.2 Effect Debug .................................................................... 59
4.3.3 Image Capturing ...............................................................60
4.3.3.1 Regular screen Image Capturing .......................... 60
4.3.3.2 Chip Low Brightness Image Capturing ................61
4.3.3.2.1 Single graysacle iterative capture Image
Capturing ...................................................................61
4.3.3.2.2 Multi grayscale capture Image Capturing . 62
4.3.4 Reference model .............................................................. 63
4.3.5 Coefficient Fusion............................................................64
4.3.5.1 Regular screen Coefficient Fusion ....................... 64
4.3.5.2 Chip Low Calibration Coefficient Fusion ............65
4.3.6 Calibration Log ................................................................ 66
Calibration Pro User Manual
5. Deseam Setting ......................................................................................68
5.1 Fuction Intrudction ......................................................................68
5.2 Enable deseam .............................................................................68
5.3 Deseam factor ..............................................................................68
5.4 Deseam only ................................................................................68
5.5 Eliminate difference ....................................................................68
6. Effect Setting .........................................................................................70
6.1 Effect setting overview ............................................................... 70
6.2 Turn on “Eliminate Differ” ......................................................... 72
6.3 Eliminate vignette ....................................................................... 72
6.4 Eliminate dirt ...............................................................................72
6.5 Ambient light ...............................................................................72
6.6 Eliminate Colored Moire ............................................................ 73
6.7 Dead Lamp .................................................................................. 73
7.Brightness and Chroma calibration ........................................................73
7.1 cali mode..................................................................................... 73
7.2 chroma calibration .......................................................................74
7.3 chroma calibration .......................................................................76
8. Tools ...................................................................................................... 78
8.1 coef Rotate Tools .........................................................................78
8.2 Cross Tools .................................................................................. 78
8.3 Gamma Test .................................................................................79
Calibration Pro User Manual
8.4 Coef Adjust ..................................................................................81
9. Suggestion on calibration ......................................................................82
10. FAQ ..................................................................................................... 83
Calibration Pro User Manual
1
1. Introduction
Calibration pro is a professional of LED display calibration software ,it was by
Colorlight, which integrates advanced algorithms ,such as AI intelligence and
machine vision to achieve accurate and efficient calibration of the display.
1.1 Operational environment
Components of calibration system
Computers
One or two PC (PC for capture and PC for control)
Operating system：Windows 10 with 64 bits system is recommended.
RAM >= 16G(CCM 6000 cameras require 64G)
Graphics card：DVI or other HD port（Using “by sender card” mode ）
camera*1( Canon70D, 80D, 90D, 7D, 7DMarkII,CCM6000;CCM6000 is
recommended)
Fig.1-1 CCM6000
Fig.1-2 Canon Camera
Lens*1(Canon was re-equipped with EF 70-300mm f/4-5.6L IS
USM , CCM6000 includes a lens )
Calibration Pro User Manual
2
Fig.1-3 Lens
CCM was re-equipped with Milivus 2/35 lens .
Fig.1-4 Lens
Head*1(Canon was re-equipped with Manfrotto-410,CCM6000 was
re-equipped with Manfrotto-405)
Fig.1-5Head
Tripod*1( MT190GOC4TB -190GO is recommended)
Fig.1-6 Tripod
Calibration Pro User Manual
3
AC adapter of camera*1
Fig.1-7 AC Adapter
ND filter (Used when the screen is highlighted)
Fig.1-8 ND filter
1.2 Camera assembly
1.2.1 Open the tripod
As shown in figure 1-9，the height of the tripod is recommended to be directly
opposite the center of the screen or close to the height of the viewer.
Fig.1-9 The tripod opened
1.2.2 Head Installation
Align the mounting hole at the bottom of tripod head with the positioning bolt of the
tripod, and turn the head clockwise tightly. As shown in figure 1-10.
Calibration Pro User Manual
4
Fig.1-10 Head Installation
Finished installation as shown in figure 1-11.
Fig.1-11 Head installation completed
1.2.3 Lens Installation
(1) Following Fig.1-12 arrow direction, toggle the release lever of the heads to the
appointed position.
(2) Adjust the lens direction consistent with the head.
(3) Follow the steps below to complete lens installation.
Firstly, insert the base rear of the lens clip into the dovetail groove of the heads. And
then press the front of the lens, and the release lever will rebound automatically.
Finish lens installation, as Fig.1-13 shown.
Indice
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
