Comat AF-MUL Manuale utente
Comat AG Bernstrasse 4 CH-3076 Worb Tel. +41 (0)31 838 55 77
Ba Voice Module / 2.2004 E
Voice Module AF-MUL
User Manual
Table of contents
Voice Module AF-MUL User Manual / 2.2004 E
2
Table of contents
Introduction ........................................................................................................................................... 3
1.1 Structure of Voice Module AF-MUL...........................................................................................3
1.2 Connection between Comat BoxX and AF-MUL ........................................................................ 4
Programming of AF-MUL.................................................................................................................... 5
2.1 Assigned functions ....................................................................................................................... 6
2.2 Recording via WAV input with a PC........................................................................................... 7
2.2.1 Configuration ........................................................................................................................ 7
2.2.2 Selection of max. recording time........................................................................................... 8
2.2.3 Online Recording .................................................................................................................. 9
2.2.4 Set Ring repetitions ............................................................................................................. 10
2.2.5 Password for outgoing calls ................................................................................................ 11
2.2.6 Acceptance of incoming calls.............................................................................................. 12
Playing of messages ............................................................................................................................. 14
3.1 PLAY Function Block................................................................................................................ 14
3.2 Function description of PLAY Function Block.......................................................................... 14
Automatic dial function ...................................................................................................................... 16
4.1 TEL and RS Function Blocks..................................................................................................... 16
4.2 Function description of TEL and RS Function Blocks............................................................... 17
4.3 Application of the automatic dialing function............................................................................ 18
4.4 Hang up and open phone line ..................................................................................................... 18
Application example............................................................................................................................ 19
Recording of messages via the incorporated microphone ............................................................... 22
6.1 Function Block MR.................................................................................................................... 22
6.2 Temporary installation of one switch for recording ................................................................... 22
6.3 Deleting all previous recordings................................................................................................. 23
6.4 Recording ................................................................................................................................... 23
6.5 Recording example..................................................................................................................... 24
6.6 Recording of voice messages via WAV input with a tape recorder........................................... 25
Chapter 1
Introduction
Voice Module AF-MUL User Manual / 2.2004 E 3
Chapter I
Introduction
Interlinking the Comat BoxX with the Voice Module AF-MUL allows several additional functions and
features:
a) Playing of voice messages (for example alarm alerts) via the incorporated AF-MUL speaker.
b) Playing of voice messages over an additional external loud speaker.
c) Dialling up of a telephone number over the phone network and playing voice messages.
d) Receiving calls and control signals over the phone network.
This functions allows an additional wide field of applications of remote alarm and status
transmissions, as well as remote controlling of the Comat BoxX by phone (mobile phones) touch keys.
The Voice Module AF-MUL has to be connected to the Comat BoxX with a special bridge connector
AF-BC (Included with AF-MUL).
1.1 Structure of Voice Module AF-MUL
Fig. 1.1
1. Socket for telephone line (plug type...)
2. Power supply terminals(110-240VAC; 12-24VDC)
3. Connecting Port with Comat BoxX (with enclosed plug AF-BC)
4. Power indication
5. Recording indication
6. Recording Microphone
7. Volume of AF-MUL Speaker
8. Terminal (port) for external Active speaker
9. Communication Port: Computer connection to monitor or program Comat BoxX, or Modem.
Connection via AF-M232 cable.
Use cable AF-RS232 to remote monitor Comat BoxX via AF-MUL with a PC.
10. WAV input connection
Chapter 1
Introduction
Voice Module AF-MUL User Manual / 2.2004 E
4
1.2 Connection between Comat BoxX and AF-MUL
-The AF-MUL module is snapped onto DIN-rail together with a Comat BoxX. [Pos. 3]
-Connect Comat BoxX and AF-MUL with the special connection bridge AF-BC (enclosed with the
AF-MUL voice module). [Pos. 1]
-Connect the power supply of AF-MUL and Comat BoxX first and plug the telephone line into the
“TEL” socket (110-240VAC or 12-24VDC). [Pos2]
Pin allocation RJ12
Fig. 1.2
Note:
Before recording the voice message the Comat BoxX and the AF-MUL must be programmed and
configured. Therefore use a PC and the programming software Quick II.
Connect PC with AF-MUL using the connection cable AF-RS232.
Fig. 1.3
Pin1 -
Pin2 -
Pin3 -
Pin4 -
Pin5 -
Pin6 -
A
B
A
B
A
B
AF-ATL
WAV-Input
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E 5
Chapter II
Programming of AF-MUL
Note:
Recordings must be done before BoxX programming with the LCD programming keys.
The function principle is similar to a recording with a tape recorder.
The different messages are recorded in sequence and one after the other i.g. the first recording
automatically is stored as message number 0, the second recording as message number 1, the third
recording as message number 2, and so on.
Recording options:
1. Directly over the incorporated AF-MUL microphone (Pos. 6)
2. Over the WAV input (Pos. 10)
a) Connecting a tape recorder
b) Connecting a PC or a note book and recording with the PC or note book microphone
c) Data transfer of a synthetic voice from the PC.
Please note:
Special functions are assigned for the first 4 recordings.
It is not possible to change these assignments and message numbers.
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E
6
2.1 Assigned functions
Message No. Function Example
0Welcome message when answering a call. Thank you for your call. Please enter your
password.
1Confirmation of the right password. The password is correct. Please enter your
control code.
2Wrong password information. The password is wrong. Please try again.
3Greeting of a called up subscriber. Hello. This is your Comat BoxX. Please
enter your password.
Telephone call Answering Dialling
Message No 0 3
Thank you for your call.
Please enter your password.
Hello. This is your Comat
BoxX. Please enter your
password.
Password incorrect
correct
Message No 1 2
The password is correct.
Please enter your control
code.
The password is wrong.
Please try again.
Message No 4 ~ 98
Message/Status/Alarm/etc.
according assignment.
All further messages (4 ~ 98) can be assigned to any functions, status or alarm messages.
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E 7
2.2 Recording via WAV input with a PC
The Windows operating system includes an Audio recorder. The Audio recorder allows recording and
playing of WAV files.
You may find the Audio recorder under the path:
Programs/Accessories/Entertainment Media’s/Audio Recorder.
A WAV file is requested for each message
Example:
Message 0 = Message 0.WAV
Message 1 = Message 1.WAV
It is also possible to create and record a synthetic WAV voice with the PC
Suitable software may be found under: www.logox.de.
This software allows to enter a written Text message with a synthetic voice playback.
2.2.1 Configuration
1. Connect WAV cable (AF-WAV) to the WAV input of the AF-MUL (Pos. 10)
2. Connect the programming cable (AF-RS-232) between the AF-MUL (Pos. 9) and your PC
3. Connect power supply to AF-MUL.
(110-240VAC or 12-24VDC, Pos. 2)
Click „Option“ and select your COM-Port. Confirm with OK.
Fig. 1.4
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E
8
2.2.2 Selection of max. recording time
Select „Set Voice Module Type“.
Fig. 1.5
Set Voice length type
Fig. 1.6
Remark:
Shorter recording time results in improved voice quality.
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E 9
[1]
[2]
2.2.3 Online Recording
Select „Online Record“ from the Option menu.
Fig. 1.7
The following window opens:
Platzhalt
er
Fig. 1.8
Chapter 2
Programming of AF-MUL
Voice Module AF-MUL User Manual / 2.2004 E
10
Note:
The first file is assigned automatically as message number 0,
the second file is assigned message number 1, etc.
Open Com port first to prepare the BoxX for message transfer.
The Baud rate is preset to 9600 and should not be altered.
Use „Start Copy“ to transfer the messages into the AF-MUL.
Each message is replayed after transmission is completed.
Exit with „Close“.
2.2.4 Set Ring repetitions
This window allows to choose repetitions of calling rings before the AF-MUL answers a phone call.
Fig. 1.9
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
