CommScope ETHERSEAL 1479563-2 Manuale utente

Instruction Sheet

1 of 2

To obtain information on CommScope®products,

contact your local CommScope®account

representative, PartnerPRO™Network Partner

or visit our website at www.commscope.com

This product is covered by one or more U.S.patents

or their foreign equivalents. For patents, see

www.commscope.com /ProductPatent/ProductPatent.aspx

408-8875

DEC. 2016 Rev E

RECEPTACLE KIT

DESCRIPTION

INSTRUCTION SHEET

1479563-2

SL Series Jack, Unshielded Twisted Pair Category 5e

408-8417

1479564-2

SL Series Jack , Shielded Category 5e

408-8602

1479565-2

SL Series Jack , Unshielded Twisted Pair Category 6

408-8417

1479566-2

SL Series Jack , Shielded Category 6

408-8417

1479599-2

In-Line Coupler , Unshielded Twisted Pair Category 5e

1479600-2

In-Line Coupler , Shielded Category 5e

1933589-2

AMP-TWIST 6S Jack

411-93007

Figure 1

Each kit consists of a receptacle and either an in-line coupler or jack (with strain relief or dust cover). A nut and

O-ring is included for installing the receptacle in a panel or faceplate. The SL series jack kit includes a shield.

See Figure 1.

NOTE

Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.

Reasons for re-issue of this instruction sheet are provided in Section 2, REVISION SUMMARY.

1. ASSEMBLY

1.1. Wire Preparation and Jack Termination

Prepare the wire and terminate the jack according to the instruction sheet listed in Figure 1.

NOTE

The jacks accepts 4-pair, twisted-pair cable having sizes 24 to 22 AWG solid conductors. The SL series jack also accepts

cable having sizes 26 to 24 AWG stranded conductors with a maximum conductor insulation diameter of 1.27 mm [.050 in.].

1.2. Panel or Faceplate Cutout

Cut the panel or faceplate according to Figure 2.

ETHERSEAL®Receptacle Kits

Receptacle

O-Ring

Nut

Shield

(Included with

SL Series Kit Only)

AMP-TWIST

6S Jack

SL Series

Jack

Dust Cover

Bend-Limiting

Strain Relief

408-8875

Rev E

2 of 2

Figure 2

1.3. Installation

1. Slide the O-ring over the threaded portion of the receptacle. See Figure 2.

2. Insert the threaded portion of the receptacle through the front of the panel or faceplate. Orient the

receptacle in the cutout so that the white arrow indicator on the front of the receptacle is facing up.

See Figure 2.

3. From the back of the panel or faceplate, thread the nut onto the threaded portion of the receptacle.

See Figure 2. Tighten the nut to a torque of 2.26 Nm [20 in.-lb].

4. Refer to Figure 3, and insert the jack or coupler into the receptacle as follows:

a. From the back of the receptacle, align the fixed latch of the jack or coupler with the white arrow

indicator of the receptacle.

b. Tilt the back of the jack or coupler up at a slight angle, and slide it into the opening of the

receptacle. Hook the fixed latch into the slot inside the receptacle.

c. Rotate the back of the jack or coupler down so that the movable latch deflects and locks into the

receptacle.

Figure 3

2. REVISION SUMMARY

Revisions to this instruction sheet include:

Rebranded to CommScope®

Nut

O-Ring

Back of

Faceplate (Ref)

White Arrow Indicator

of Receptacle

Recommended Panel or Faceplate Cutout

Installing Receptacle

Note: Not to Scale

25.65 mm

[1.010 in.]

⌀28.45 mm

⌀[1.120 in.]

White Arrow Indicator

of Receptacle

Front of Receptacle

Movable Latch

Jack (Ref)

Slot Inside of

Receptacle

Fixed Latch

Opening of

Receptacle

Fixed Latch

Movable Latch

Rotate

Jack

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CommScope Cavi e connettori

CommScope

CommScope NOVUX SEC 100 Manuale utente

CommScope

CommScope AMP NETCONNECT 553454-1 Manuale utente

CommScope

CommScope HELIAX MFJS6UDHNA00 Manuale utente

CommScope

CommScope LC Manuale utente

CommScope

CommScope NOVUX Manuale utente

CommScope

CommScope SYSTIMAX 360 iPatch PATCHMAX Manuale utente

CommScope

CommScope OmniReach FTTX Manuale utente

CommScope

CommScope FACT Manuale utente

CommScope

CommScope FOSC450 C Manuale utente

CommScope

CommScope TDUX-35 Manuale utente

CommScope

CommScope LSX-288 Manuale utente

CommScope

CommScope FOSC 450 A Manuale utente

CommScope

CommScope LightCrimp Plus SC Simplex Manuale utente

CommScope

CommScope SYSTIMAX 360 iPatch 360-iP-G2-1U-LC-FX Manuale utente

CommScope

CommScope FOSC-350C Manuale utente

CommScope

CommScope BUDI-S Manuale utente

CommScope

CommScope AMP NETCONNECT SL Series Manuale utente

CommScope

CommScope FOSC-OC-3 Manuale utente

CommScope

CommScope LightCrimp Plus LC Manuale utente

CommScope

CommScope M2400 Series Manuale utente

CommScope

CommScope AMP NETCONNECT 1933352 Series Manuale utente

CommScope

CommScope QWIK MPO Series Manuale utente

CommScope

CommScope LightCrimp Plus ST Manuale utente

CommScope

CommScope FDH1204-24SE2 Manuale utente

Manuali Cavi e connettori popolari di altre marche

Philips

Philips SWA6310 Manuale utente

StarTech.com

StarTech.com CRJ4550PK Manuale utente

Nohau

Nohau EMUL-IP2K-PC Manuale utente

Foxun

Foxun SX-SP144E-HD4K2K Manuale utente

Philips

Philips SWA3305W Manuale utente

opticis

opticis Stretch DVIM1-1P0x Manuale utente

Volkswagen

Volkswagen VAS 6558A Manuale utente

NEXIBO

NEXIBO N-13 Manuale utente

CYP

CYP PU-1H3HBTL Manuale utente

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuale utente

Global Caché

Global Caché Flex Link Blaster Manuale utente

Hauppauge

Hauppauge USB-Live2 Manuale utente

Fenix

Fenix MPSV 15 Manuale utente

BEGA

BEGA 71 085 Manuale utente

Tesla

Tesla HPWC Manuale utente

GAMERON

GAMERON LUXURY TV CABLE Manuale utente

molex

molex Milli-Grid Dual row 87568 Series Manuale utente

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuale utente