Component Solution Services Verity SMM07 Manuale utente
7 INCH
MIRROR MONITOR SYSTEM
Clip-on
Part # SMM07
5-INCH “S”SERIES SYSTEM
Part # SM05S
5-INCH “S”SERIES SYSTEM
Part # SM05S
5-INCH “S”SERIES SYSTEM
Part # SM05S
© 2021 Verity Rear Vision Systems
Vision Systems
Est. 2002 with over 18+ years of the
Latest Engineering, Highest Quality, Best Support
COST EFFICIENT
Est. 2002 with over 18+ years of the
Latest Engineering, Highest Quality, Best Support
COST EFFICIENT
Est. 2002 with over 18+ years of the
Latest Engineering, Highest Quality, Best Support
COST EFFICIENT
Est. 2002 with over 18+ years of the
a division of
Component Solution Services
56600 Twin Branch Dr.,
Mishawaka, IN 46545
574-807-6002
2
TABLE OF CONTENTS & PHONE NUMBERS
Contents
TABLE OF CONTENTS & PHONE NUMBERS ............................................2
ABOUT US ............................................................................................3
THINK SAFETY ......................................................................................4
SYSTEM FEATURES ...............................................................................6
SYSTEM MEASURMENTS ......................................................................7
SYSTEM COMPONENTS.........................................................................8
SYSTEM COMPONENTS.........................................................................9
CABLE CONNECTIONS .........................................................................10
MONITOR OPERATIONS......................................................................11
SMM07 OPTIONS ...............................................................................13
OEM AND FLEET OPTIONS ..................................................................14
LIMITED ONE (1) YEAR WARRANTY.....................................................15
TECHNICAL SUPPORT..........................................................................16
SALES
574-807-6005
TECH SUPPORT
574-807-6004
Our tech support is manned by
real people in front of all of our
powered-up systems prepared
to knowledgeably talk you
through an issue solution –not
a person with no knowledge in
front of a spreadsheet of
prepared phrases. Verity=24/7
support for OEMs and Fleets.
3
ABOUT US
Component Solution Services, LLC offers the Verity Rear
Vision Systems ®(Verity) to meet any requirements and
price point within the trucking, specialty vehicles, and RV
industry. Verity is also home to the Supreme View®line of
specialty format systems. Our standard cabled systems
offer unparalleled features into the trucking and RV
industries. Designed for professional drivers, Verity
develops and markets products and applications to transmit
video, audio, and data either individually or in all
combinations. The company has also developed,
manufactured, and marketed different kinds of personal and
vehicle video cameras, DVRs, and accessories for the
commercial transportation, fire/rescue, and marine OEM
markets.
The photograph above shows our 2020
warehouse addition of 5,000 ft.
Use this barcode or
link to visit our
website
www.verityrvs.com
4
THINK
SAFETY
Read our manual before operating
or installing this system.
Most likely, your system came pre-installed so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vison System
SMM07. When installed and used properly, your SMM07 is
designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity units are designed for
quick installation by trained professionals in proper
installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity products are intended to be installed as a supplement
and our observation systems and/or products are not
intended for use as substitutes for rear-view mirror devices,
or for any other standard motor vehicle equipment which may
be required to be installed on vehicles by law. Verity
products promote improving the vehicle operator’s field of
view. Our products are no substitute for proper defensive
driving techniques, observance of traffic laws, and motor
vehicle safety regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly) to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the
SMM07. Opening the product will break the tamper indicators
and void the warranty. Contact our tech support if a problem
should arise: 574-807-6002. For faster response, fill out a
service ticket found on our website. www.verityrvs.com
5
WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be
crushed in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception).
Exposure to water, such as rain, may damage the
unit.
6
SYSTEM FEATURES
MONITOR SPECIFICATIONS
(Monitor part #MMK07)
7-inch Car Clip-On mirror monitor
TFT-LCD (16:9)
Format: NTSC
New Higher Resolution: 800 (W) x 480(H) RGB
Power supply: DC 12V
Video: 2-channel video input, V1/V1 switching with
4-pin male aviation plugs
Contrast: 300:1
Waterproof fuses
CAMERA SPECIFICATIONS
(Camera Part #C001S)
Horizontal Resolution: 600 TV Lines
TV System: NTSC
Image Type: 1/3 Inch Color CCD Sharp® (or equivalent)
(no cheap off brands used)
Effective Pixel: 510 x 492
Illumination: 0 Lux (built-in 17 high output IR LEDs for night vision)
Aluminum Housing
Waterproof: IP69K
Power Supply: DC 12V (power from the monitor)
Shockproof: 10G
Operating Temperature: -40°~70°C
Built-in Microphone
Viewing Angle: 170°
7
SYSTEM MEASURMENTS
8
SYSTEM COMPONENTS
Weatherproof Camera
with night vision
20-Meter Camera
Cable
Remote
7”Clip-on / post
Mirror Monitor
Monitor Harness w/
waterproof fuse
Manual
Windshield Bracket
Post mount
Hardware
9
Thru-wall Gasket to Seal
Thru-Vehicle Exterior
Waterproof Aviation
Connectors
SYSTEM COMPONENTS
This monitor can be mounted over any existing mirror.
Take caution not to block any sensors on the current mirror.
Camera Connection
Be sure to use the
vibration gasket when
installing the camera. It
is packaged with the
camera hex wrench.
Do NOT make the cable tight from the
back of camera going into the truck –form a drip loop
with slack.
10
CABLE CONNECTIONS
Verity Rear Vision Systems Wire Connection Key
4-pin camera connectors & trigger wires
Camera 2 (Green trigger wire
Red wire to key-on hot (+) 12-32v. DC (fused)
Black wire to GND. (-)
Green wire to positive back-up light
BE SURE TO ALIGN MONITOR CABLE CONNECTION
CB21
Female/Female
Camera Extension
Cable
CAM 1
CAM 2
Waterproof
Fuse
Chassis Ground
Indice
