Concept Pro CBP360-HD Manuale utente

CBP360-HD

High Definition 360º Panoramic

Camera

USER MANUAL

CBP360-HD

High Definition 360º Panoramic

Camera

USER MANUAL

1. This installation should be made by a qualified service person and should abide to all local

codes.

2. Avoid installation on a surface subjected to frequent vibration or shocks.

3. Do not operate the camera beyond its temperature range or power source ratings.

4. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

5. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

6. Never use the camera close to a gas or oil leak.

7. Do not disassemble the camera.

8. Never keep the camera face to strong light directly, this can damage the sensor.

9. Ensure all removable covers are replaced to protect the inner components.

10. Do not install near devices which emit a strong electro-magnetic field.

11. Use a dry or damp cloth only for cleaning.

12. Internal dome only - Do not drop the camera or subject the unit to physical shocks.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

Remark: Changes or modifications not expressly approved by the manufacturer can

cause the camera to be damaged and become inoperable. This may invalidate the

user warranty.

CAUTION

1. This installation should be made by a qualified service person and should abide to all local

codes.

2. Avoid installation on a surface subjected to frequent vibration or shocks.

3. Do not operate the camera beyond its temperature range or power source ratings.

4. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

5. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

6. Never use the camera close to a gas or oil leak.

7. Do not disassemble the camera.

8. Never keep the camera face to strong light directly, this can damage the sensor.

9. Ensure all removable covers are replaced to protect the inner components.

10. Do not install near devices which emit a strong electro-magnetic field.

11. Use a dry or damp cloth only for cleaning.

12. Internal dome only - Do not drop the camera or subject the unit to physical shocks.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

INSTALLATION

PACKING CONTENTS

SURFACE MOUNT FLUSH MOUNT

Wall Plugs

Ceiling Screws

Body Camera

Ceiling Cover

Ceiling Screws

Ceiling

Screws

Ceiling

Screw

Fitting

Screw

Wall

plugs

Fitting Screws

Ceiling

Cover

Ceiling

Label1

Label2

Label3

Label4

RS485 cable

RCA cable

Power cable

SDI cable

HDMI connector

Microphone

Camera 1 CVBS(BNC) output

Camera 2 CVBS(BNC) output

Camera 3 CVBS(BNC) output

Camera 4 CVBS(BNC) output

Purple + / white - (Pelco D, 9600)

Audio output to speaker or DVR audio input

DC12V

SDI connector output (BNC gold color)

HDMI output to connect to a HDMI monitor

Pinhole type microphone built in

CONNECTIONS

This 360° camera can be installed in many different configuration.

Without DVR

HD-SDI DVR

Analogue DVR

Hybrid HD-SDI and Analogue DVR

CONFIGURATIONS

KEYBOARD CBP360-HD 16:9 1080p Monitor

HDMI CABLE

RS485

CBP360-HD HD-SDI DVR 16:9 1080p Monitor

HDMI / VGA

RS485 HD-SDI

KEYBOARD

CBP360-HD

ANALOGUE DVR 4:3 Monitor

HDMI / VGA / BNC

RS485

KEYBOARD

CBP360-HD

VHD-SD4-CONV

HD-SDI DVR

16:9 1080p Monitor

HDMI / VGA

RS485

HD-SDI

Analogue to HD-SDI

HD-SDI

KEYBOARD

CBP360-HD

VHDR HYBRID DVR

16:9 1080p Monitor

HDMI / VGA

RS485

HD-SDI

ANALOGUE

KEYBOARD

DIMENSIONS

OSD (On Screen Display)

AE (Auto Exposure)

AE 50Hz: PAL /60Hz:NTSC

SHUTTER SPEED

Return

X3; X2; X1; AUTO; 1/100; 1/120;

1/250

AWB (Auto White Balance)

AWB AWB

AWC SET

Return

AUTO, OFF

MD AREA

MODE

RETURN

ACTION

AREA

XPOS

YPOS

WIDTH

HEIGHT

RETURN

ON, OFF

ON/OFF

1~4

0000~1943

0256~1943

BRIGHTNESS

BRIGHTNESS 1 ~ 9

SATURATION

SATURATION 1 ~ 9

MD (Motion Detection)

NOISE REDUCTION

NOISE REDUCTION 00~99

SHOW MODE

SHOW MODE WALL 0/ WALL 90/ WALL 180/ WALL

270/ DESK/ CEILING

DAY/NIGHT

DAY/NIGHT AUTO, DAY, NIGHT

MASK MASK

COLOR

TRANSP

RETURN

MODE

AREA

XPOS

YPOS

WIDTH

HEIGHT

RETURN

1~5

1~3

OFF/ON

1~4

0001~1943

0000~1943

MASK (Privacy Zone)

PATTERN (Display Mode Option)

PATTERN MODE 1~13

REBOOT

EXIT

SYSTEM CAMERA1

CAMERA2

CAMERA3

CAMERA4

AUTOFLIP

SETID

LOAD DEFAULT

RETURN

ON/OFF

If user plans to have more than 1

device in the installation

Will reset the device to factory default

SYSTEM

When you change the pattern mode, you have to wait 20 sec

until the change is displayed on the monitor.

PATTERNS

MODE

1~4

Camera

1~4 + 360º

Camera 1 +

Camera 3 +

360º

*See Note

180º in

16:9

Display

Quad +

360º

MODE 5

MODE 6

MODE 7

MODE 8

PATTERN

PRESET

TOUR

PRESET

SEQUENCE

MOTION

TRACKING

CAMERA 1

360º

CAMERA 1 CAMERA 2

CAMERA 3 CAMERA 4 360º

180º IN FULL SCREEN DIS PLAY

CAMERA 1

CAMERA 3 360º

180º IN 16:9 DISPLAY

When you change the pattern mode, you have to wait 20 sec until the change is

displayed on the monitor.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Concept Pro Telecamera di sicurezza

Concept Pro

Concept Pro CVP9324DN-IP4M Manuale utente

Concept Pro

Concept Pro AHD Series Manuale utente

Concept Pro

Concept Pro AIR8012-IP3M-Z Manuale utente

Concept Pro

Concept Pro AIR3016 Manuale utente

Concept Pro

Concept Pro VCP7238-AHD Manuale utente

Concept Pro

Concept Pro VHSD-810EXT Manuale utente

Concept Pro

Concept Pro VHSDIR-812EXT-IP3M Manuale utente

Concept Pro

Concept Pro VHSDIR-680EXT-IP Manuale utente

Concept Pro

Concept Pro CVP5325DNIR-AHD2M/2.8 Manuale utente

Concept Pro

Concept Pro AHD CP-HSD10-AHD Manuale utente

Concept Pro

Concept Pro CBP360-IP12M Manuale utente

Concept Pro

Concept Pro CVP9324DN-IP Manuale utente

Concept Pro

Concept Pro CPL-MVIR-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP4M Manuale utente

Concept Pro

Concept Pro AIR2024-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro CVP9324-AHD Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP2M-Z Manuale utente

Concept Pro

Concept Pro VHSDIR-670EXT-IP Manuale utente

Concept Pro

Concept Pro AIR8010-AHD-Z Manuale utente

Concept Pro

Concept Pro VCP7236 Manuale utente

Concept Pro

Concept Pro CVP5325DNIR-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro CP-HSD20-IP Manuale utente

Concept Pro

Concept Pro AIR3526-AHD2M Manuale utente

Concept Pro

Concept Pro CBP4304 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente