Concept Pro CVP9324DN-IP4M Manuale utente

External Dome Camera

USER MANUAL

CVP9324DN-IP4M

CVP9324DNIR-IP4M

CVP9324DNIR-IP4M-G

CVP9324DNIR-IP4M-Z

CAUTION

Remark: Changes or modifications not expressly approved by the manufacturer can

cause the camera to be damaged and become inoperable. This may invalidate the

user warranty.

1. This installation should be made by a qualified service person and should abide to all

local codes.

2. Avoid installation on a surface subjected to frequent vibration or shocks.

3. Do not operate the camera beyond its temperature range or power source ratings.

4. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

5. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

6. Never use the camera close to a gas or oil leak.

7. Do not disassemble the camera.

8. Never let the camera directly face a strong light source.

9. Ensure all removable covers are replaced to protect the inner components.

10. Do not install near devices which emit a strong electro-magnetic field.

11. Use a dry or damp cloth only for cleaning.

12. Internal CBP dome only - Do not drop the camera or subject the unit to physical shocks.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY INVALIDATE

THE WARRANTY OR CAUSE SERIOUS INJURY.

DIMENSIONS

CVP9324 IP4M Series

Image example shows IR model

97.0mm

3.82in

55.5mm

2.19in

40 mm

1.57in

5.1”

130mm

112mm

4.4in

3/4” - 14

NPS thread

3.9”

100.0mm

3.4”

87 mm

Ø 0.1”

3.5 mm

1. This installation should be made by a qualified service person and should abide to all

local codes.

2. Avoid installation on a surface subjected to frequent vibration or shocks.

3. Do not operate the camera beyond its temperature range or power source ratings.

4. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

5. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

6. Never use the camera close to a gas or oil leak.

7. Do not disassemble the camera.

8. Never let the camera directly face a strong light source.

9. Ensure all removable covers are replaced to protect the inner components.

10. Do not install near devices which emit a strong electro-magnetic field.

11. Use a dry or damp cloth only for cleaning.

12. Internal CBP dome only - Do not drop the camera or subject the unit to physical shocks.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY INVALIDATE

THE WARRANTY OR CAUSE SERIOUS INJURY.

CONNECTION

lCheck the power supply is the correct rating and connect it to the power

port on the camera.

l Connect the RJ45 connector to your network switch. If you are using

a PoE (Power over Ethernet) remove the power supply to the camera as

it is not required.

l View the image on your monitoring device to check the power and

video connections are working properly.

l A quick method would be to connect a BNC test Monitor to the SVO.

Power connector

Network Cable (RJ45)

Audio Input

Audio Output

TRI-AXIS GIMBAL

Example shows vandal resistant dome casing

360º

90º

360º

FINDING THE CAMERA’S IP ADDRESS

Use the steps below to find the camera’s IP address and connect to the camera over the local

area network (LAN) using Concept Pro Lite, UPnP on Windows®7 or Bonjour in Mac OS®

1. Finding the camera IP using BNC Test Cable

When the BNC test cable is connected to the camera, the IP address is shown on the test monitor.

The camera must be connected to power to use the BNC test cable.

NOTE: The default IP address of 192.168.0.120 is shown if the camera cannot obtain an IP address

from the router. Check the Ethernet/power connections and router

configuration.

1. Click Start>Computer>Network. The camera’s IP address appears under Network

Infrastructure.

2. Finding the Camera’s IP Address using UPnP in Windows® 7.

NOTE: To use this method, your router must support UPnP and the camera and computer must be

on the same network. UPnP is enabled in the camera by default, and can be enabled/disabled

using Concept Pro Lite (Check the Concept Pro Lite manual for details).

3. Finding the camera’s IP address using Bonjour® in Mac OS®

NOTE: To use this method, the camera computer must be on the same network. Bonjour® is

enabled by default, and can be enabled/disabled using Concept Pro Lite (check the Concept Pro

Lite manual for details)

1. Open Safari® browser and click the Bookmarks button

2. Click Bonjour. The camera’s IP address appears in the Bonjour Devices list.

3.Double-click the camera to open it in Safari.

-Double click to open

the camera

2. Double-click the camera to open it in

your default browser.

3. Under User Name and Password.

Enter the camera’s User Name .

(default: admin) and Password.

(default: admin) and click Login.

ARROW BUTTON to log in

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click

1. Open Safari® browser and click the Bookmarks button

2. Click Bonjour. The camera’s IP address appears in the Bonjour Devices list.

3.Double-click the camera to open it in Safari.

SVO

*Please note: The Service Video Out is standard definition

This is an analogue Video Output only, used for setting up via a test monitor.

Bookmarks

button

Bonjour

Double-click the camera’s IP address

4. Under User Name and Password, enter the camera’s User Name (default: admin) and Password

(default: admin) and click Login.

BNC analogue output

Micro SD Card

Reset Button

ARROW BUTTON to log in

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click

Note: Some firmware versions may have enhanced security enabled. If so, you will be prompted to create

a new unique User Name and Password upon initial log-in.

All installation methods

Loosen the three tamper screws using the provided allen key. List the dome cover.

NOTE: If you plan to use conduit fitting, remove conduit cap using the provided

conduit key.

Method 1 - Surface Mount

Use the included mounting template (installation option 2) to mark and pre-drill the

required holes. Remove 2 of the 3 base locking screws. Use 2pc of the 2.8” screws

to mount the camera directly to the mounting surface.

Remove the 3rd base locking screw and install the 3rd 2.8” screw.

Method 2 - Surface Mount

2b. Use the included mounting template (installation Option 1) to mark

and pre-drill the required holes.

2c. Remove the camera base by unscrewing the 3 base locking

screws, and turn camera module approx. 5 degrees counterclockwise

to detatch camera base from the camera module.

2d. Install the base to the correct holes as indicated on the mount

template using the 1.2” screws.

Go to step 3a to complete installation.

VANDAL RESISTANT DOME INSTALLATION

SPECIFICATION

IMAGE SENSOR

MIN. ILLUMINATION

DAY & NIGHT

SHUTTER SPEED

AUTO IRIS

WIDE DYNAMIC RANGE

DIGITAL NOISE REDUCTION

LENS

FIELD OF VIEW

IR LED

IR RANGE

VIDEO COMPRESSION

BIT RATE (CBR/VBR)

AUDIO COMPRESSION

MAX. RESOLUTION

STREAM

DEFAULT STREAM SETTINGS

IMAGE SETTING

HLC

9:16 CORRIDOR MODE

DIS

ROI

DEFOG

NETWORK PROTOCOLS

ALARM TRIGGER

RTSP VIDEO

SECURITY

WEB LANGUAGE

SYSTEM COMPATIBILITY

ETHERNET

AUDIO I/O

ALARM I/O

RS485

SVO OUTPUT

SVO IP ADDRESS OSD

RESET BUTTON

EDGE STORAGE

POWER SUPPLY

POWER CONSUMPTION

OPERATING TEMPERATURE

OPERATING HUMIDITY

INGRESS PROTECTION

APPROVALS

PRODUCT DIMENSIONS

PRODUCT WEIGHT

CVP9324DN-IP4M

1/3” Progressive Scan CMOS

Colour 0.05 Lux; B/W 0 Lux

ICR

1/5-1/20000

Fixed

WDR>120dB

2D/3D

2.8-12mm Varifocal

90° to 35°

N/A

H.264/265, MJPEG

Main stream: 500kb-12000kb; Sub stream 100kb-6000kb

G.711, RAW_PCM

2688x1520/2560x1440/20fps, 2304x1296/30fps, 1920x1080/30fps

Stream 1: 2688x1520/2560x1440/2304x1296/1920x1080,

Stream 2: D1 to QVGA

Stream 1: 2560x1440 Stream 2: 640x480

Rotate Mode, Saturation, Brightness, Contrast, Sharpness

Yes

Auto

Yes

HTTP, HTTPS, TCP/IP, UDP/IP, RTSP, DHCP, NTP, PPPoE, Unicast and

Multicast supported.

Motion Detection, Network disconnect, Disk alarm, Alarm Input

Standard RFC2326, Support QuickTime / VLC Player.

User security authentication, Reset, Hardware WatchDog

English, Chinese, Polish, Italian, Portuguese, Spanish

Onvif, CGI

1 Ethernet (10/100 Base-T) RJ-45 Connector

1ch Audio In & 1ch Audio Out

1ch Alarm In & 1ch Alarm Out

N/A

Yes

Micro SD/SDHC/SDXC slot, Max 128GB

DC12V/POE

-30℃~+60℃

0% - 90% RH

IP66

CE / FCC

φ130mm ×112mm

900g

SPECIFICATION

IMAGE SENSOR

MIN. ILLUMINATION

DAY & NIGHT

SHUTTER SPEED

AUTO IRIS

WIDE DYNAMIC RANGE

DIGITAL NOISE REDUCTION

LENS

FIELD OF VIEW

IR LED

IR RANGE

VIDEO COMPRESSION

BIT RATE (CBR/VBR)

AUDIO COMPRESSION

MAX. RESOLUTION

STREAM

DEFAULT STREAM SETTINGS

IMAGE SETTING

HLC

9:16 CORRIDOR MODE

DIS

ROI

DEFOG

NETWORK PROTOCOLS

ALARM TRIGGER

RTSP VIDEO

SECURITY

WEB LANGUAGE

SYSTEM COMPATIBILITY

ETHERNET

AUDIO I/O

ALARM I/O

RS485

SVO OUTPUT

SVO IP ADDRESS OSD

RESET BUTTON

EDGE STORAGE

POWER SUPPLY

POWER CONSUMPTION

OPERATING TEMPERATURE

OPERATING HUMIDITY

INGRESS PROTECTION

APPROVALS

PRODUCT DIMENSIONS

PRODUCT WEIGHT

1/3” Progressive Scan CMOS

Colour 0.05Lux; IR ON 0 Lux

ICR

1/5-1/20000

Fixed

WDR>120dB

2D/3D

90° to 35°

12pcs

15-20m

H.264/265, MJPEG

Main stream: 500kb-12000kb; Sub stream 100kb-6000kb

G.711, RAW_PCM

2688x1520/2560x1440/20fps, 2304x1296/30fps, 1920x1080/30fps

Stream 1: 2688x1520/2560x1440/2304x1296/1920x1080,

Stream 2: D1 to QVGA

Stream 1: 2560x1440 Stream 2: 640x480

Rotate Mode, Saturation, Brightness, Contrast, Sharpness

Yes

Auto

Yes

HTTP, HTTPS, TCP/IP, UDP/IP, RTSP, DHCP, NTP, PPPoE, Unicast and

Multicast supported.

Motion Detection, Network disconnect, Disk alarm, Alarm Input

Standard RFC2326, Support QuickTime / VLC Player.

User security authentication, Reset, Hardware WatchDog

English, Chinese, Polish, Italian, Portuguese, Spanish

Onvif, CGI

1 Ethernet (10/100 Base-T) RJ-45 Connector

1ch Audio In & 1ch Audio Out

1ch Alarm In & 1ch Alarm Out

N/A

Yes

Micro SD/SDHC/SDXC slot, Max 128GB

DC12V/POE

3W(IR LED OFF); 5W (IR LED ON）

-30℃~+60℃

0% - 90% RH

IP66

CE / FCC

φ130mm ×112mm

900g

CVP9324DNIR-IP4M / CVP9324DNIR-IP4M-G CVP9324DNIR-IP4M-Z

2.8-12mm Varifocal 2.8-12mm Motorised Zoom

PACKING CONTENTS

CVP9324 IP4M

Wall Plugs

Fitting Screws

Mounting Template

Manual

Software CD

RJ45 Coupler

Allen Key

Conduit Key

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Concept Pro Telecamera di sicurezza

Concept Pro

Concept Pro CVP9324-AHD Manuale utente

Concept Pro

Concept Pro VCP7238-AHD Manuale utente

Concept Pro

Concept Pro VHSDIR-680EXT-IP Manuale utente

Concept Pro

Concept Pro VHSDIR-670EXT-IP Manuale utente

Concept Pro

Concept Pro VHSDIR-812EXT-IP3M Manuale utente

Concept Pro

Concept Pro AHD CP-HSD10-AHD Manuale utente

Concept Pro

Concept Pro CP-HSD20-IP Manuale utente

Concept Pro

Concept Pro AIR8012-IP3M-Z Manuale utente

Concept Pro

Concept Pro CBP6314DNIR Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP2M-Z Manuale utente

Concept Pro

Concept Pro VCP553 Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP4M Manuale utente

Concept Pro

Concept Pro CVP5325DNIR-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro VCP7236 Manuale utente

Concept Pro

Concept Pro AIR3526-AHD2M Manuale utente

Concept Pro

Concept Pro CPL-MVIR-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro AIR8012-IP3M-Z Manuale utente

Concept Pro

Concept Pro CBP360-IP12M Manuale utente

Concept Pro

Concept Pro AIR3526-IP2M Manuale utente

Concept Pro

Concept Pro VHSD-810EXT Manuale utente

Concept Pro

Concept Pro CVP9324DN-IP Manuale utente

Concept Pro

Concept Pro CP-HSD10-IP Manuale utente

Concept Pro

Concept Pro AIR2024-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro AIR3016 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente