Connects2 Vision CAM-FD13 Manuale utente

Connects2Vision

www.c2vision-eu.com

• Image Sensor:

• TV Lines:

• Resolution:

• Min. Illumination:

• Lens size:

• Night Vision Distance:

• Waterproof Rating:

• Viewing Angle:

• Lens Adjust:

• Video Output:

• Parking Guides:

• Power Rating:

User Manual

Dual Lens Brake Light Camera

Ford Transit Custom 2012 - UP

PRODUCT FEATURES:

CAM-FD13

V3.10-22

Reversing Camera Driving Camera

Colour 1/3”CMOS

580

648 x 488 pixels

0.1 Lux (0 Lux when LED’s on)

1.8mm

35ft

IP68

Vertical: 80° Horizontal: 145° Diagonal: 175°

20° (Vertical movement only)

1.0 Vp-p/75 Ohm

Yes (Removable)

12V

Colour 1/3”CMOS

580

648 x 488 pixels

0.1 Lux

3.6mm

IP68

Vertical: 55° Horizontal: 80° Diagonal: 110°

30° (Vertical movement only)

1.0 Vp-p/75 Ohm

12V

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installation.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any

technical issues. With this in mind, when contacting Connects2, try to provide as

much Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

DISCLAIMER:

Connects2Vision

www.c2vision-eu.com

CONTENTS

• Camera with Male 7pin camera connector

• 10m Female 7pin to Male 7pin extension cable

• 7pin Male aviation connector to 2x Female 4pin connectors (1x Yellow, 1x Black)

• 2x 4pin Male aviation connectors to 2x Female RCA’s (1x Yellow, 1x Black)

• 2x DC power cables with Male DC connector to bare wires

• 2x Male to Male RCA adapters

• 3M camera shaped foam pad

• Instructions

INSTALLATION

1. Remove the third brake light from the vehicle and unplug the connection

cable.

2. Ret the CAM-FD13 (if needed, with the use of the 3M foam pad) to the

vehicle, taking care not to trap any cables.

3. Connect the 7pin of the extension cable to the camera and thread through

the vehicle

4. Attach the Female 7pin connector from the extension to the 7pin to dual

4pin adapter.

5. Take the 2x 4pin connections and attach both the 4pin connectors found on

the RCA/DC split wire.

6. Use both the DC power cables to plug into the black connector and

proceed to wire the red to a source of 12V and black to a source of ground.

7. Use the RCA adpater to plug into the yellow RCA on the harness, and

proceed to plug this into the aftermarket accessory’s video input(s).

8. Test the camera connection by turning on the ignition. The rear camera feed

should now be visible on screen. Put the vehicle into reverse and the reverse

camera feed will automatically populate on screen.

If camera feed is unresponsive, please uninstall the wiring and reinstall carefully

in accordance with the above steps.

9. The camera will be default with parking guidelines. To remove this, simply cut

the black loop wire found on the camera’s connector.

For further help and support, please contact us directly at

support.connects2.com/tickets/technical

and ll out a support ticket with the full details of your issue.

Subscribe to our YouTube Channel for installation

guides and tips... www.youtube.com/connects2

Altri manuali Connects2 Telecamera da cruscotto

Connects2

Connects2 Vision CAM-26 Manuale utente

Connects2

Connects2 CAM-ST1 Manuale utente

Connects2

Connects2 CAM-SK2-AD Manuale utente

Connects2

Connects2 Vision CAM-14 Manuale utente

Connects2

Connects2 CAM-KIT8 Manuale utente

Connects2

Connects2 CAM-VW1-AD Manuale utente

Connects2

Connects2 CAM-VW8 Manuale utente

Connects2

Connects2 CAM-AU5 Manuale utente

Connects2

Connects2 CAM-FD24 Manuale utente

Connects2

Connects2 CAM-MB9 Manuale utente

Connects2

Connects2 CAM-PO1-AD Manuale utente

Connects2

Connects2 CAM-AU6 Manuale utente

Connects2

Connects2 CAM-FT5 Manuale utente

Connects2

Connects2 CAM-JG1-AD Manuale utente

Connects2

Connects2 CAM-1 Manuale utente

Connects2

Connects2 CAM-30 Manuale utente

Connects2

Connects2 CAM-CT1 Manuale utente

Connects2

Connects2 CAM-PE2 Manuale utente

Connects2

Connects2 Vision CAM-16 Manuale utente

Connects2

Connects2 CAM-FT3 Manuale utente

Connects2

Connects2 Connects2Vision CAM-LR2-AD Manuale utente

Connects2

Connects2 CAM-FD14 Manuale utente

Connects2

Connects2 Vision CAM-37 Manuale utente

Connects2

Connects2 Vision CAM-34 Manuale utente

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Rexing

Rexing M1 Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente