Crave Curve Mini Manuale utente
USER GUIDE
2
03
Package Contents
06 09
Connectivity Specifications
Overview
04 07
Audio Control
10
Troubleshooting
Powering Phone Calls
05 08 12
Safety
TABLE OF CONTENTS
3
Crave Curve Mini Speaker
Micro USB
Charging Cable
User Guide
PACKAGE C NTENTS
4
VERVIEW
Press and hold to turn the speaker on or o.
Press and hold the +or - buon
to increase or decrease volume.
Tap (without holding) the +or -
buon to switch between audio tracks.
Charge the Crave Curve Mini speaker with the provided
USB cable and your USB charger (not included) before
rst me use.
5
Press and hold the +or - buon
to increase or decrease volume.
Tap (without holding) the +or -
buon to switch between audio tracks.
Charge the Crave Curve Mini speaker with the provided
USB cable and your USB charger (not included) before
rst me use.
Power the speaker on/o by holding the power buon.
P WERING
6
Connecon via the 3.5mm stereo cable
(non Bluetooth opon)
- Connect your device to the 3.5mm port using a stereo
audio cable.
- Play audio from any device ulizing the 3.5mm output port.
CONNECT VITY
Connecon via Bluetooth
- Hold for several seconds to Power On.
- Listen for Power On tone, followed by Bluetooth
pairing signal.
- Enable Bluetooth funcon on your device.
- Speaker will remain in pairing mode unl
located on the device list.
- Select “CRAVE Curve Mini” speaker from the device list.
Once paired, you will hear Bluetooth connected tone.
7
Connecon via the 3.5mm stereo cable
(non Bluetooth opon)
- Connect your device to the 3.5mm port using a stereo
audio cable.
- Play audio from any device ulizing the 3.5mm output port.
Connecon via Bluetooth
- Hold for several seconds to Power On.
- Listen for Power On tone, followed by Bluetooth
pairing signal.
- Enable Bluetooth funcon on your device.
- Speaker will remain in pairing mode unl
located on the device list.
- Select “CRAVE Curve Mini” speaker from the device list.
Once paired, you will hear Bluetooth connected tone.
For best sound quality:
Place the speaker base
on a hard surface.
Face the speaker in
direcon of user.
Keep the device
within speaker range.
AUDIO CONTR L
01
02
03
8
PHONE ALLS
Using built-in speakerphone and microphone
Accept/end a phone call from
your phone directly.
USB Charge voltage:
DC 5V, 0.5A
Power Output:
5W
9
Accept/end a phone call from
your phone directly.
SPECIFICATIONS
Baery size:
500 mAh
Bluetooth range:
USB Charge voltage:
DC 5V, 0.5A
Power Output:
5W
Frequency:
90Hz – 20kHz
Size:
3.07x2.36x2.31 in
66 .
10
Speaker is disconnecng from phone/tablet
1 | Move your device closer to the speaker.
2 | Power cycle the speaker o/on and reconnect.
3 | Remove any visible obstrucon between the speaker and
your device.
4 | Check for signal interference from other devices in
proximity to the speaker.
Sound Quality
1 | Check if your phone/tablet/device is in close proximity
to the speaker.
2 | Remove any visible obstrucons between the speaker and
your device.
3 | Reduce volume on the device.
TROUBLESH TING
Indice
Altri manuali Crave Altoparlanti
