Crypto ReDi 40 MP Manuale utente
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
2
Table of Contents
1. INTRODUCTION . ....................................................................5
2. SYSTEM CONNECTION. ........................................................8
3. GETTING STARTED. ...............................................................9
4. OPERATION . ......................................................................... 11
5. EDIT CHANNEL......................................................................12
6. SYSTEM SETUP ....................................................................13
7. TOOLS ....................................................................................16
8. GAME......................................................................................20
9. REC.........................................................................................20
10. TIMESHIFT/ RECORD .........................................................22
11. TROUBLESHOOTING ..........................................................25
12. TECHNICALSPECIFICATIONS............................................26
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
3
SAFETY INFORMATION
This sheet lists important safety information that will help to assure proper use of the product.
Please read them carefully before operation of your product.
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
1. To prevent electric shock do not attempt opening or removing the covers of the device. The
device uses AC220~240V and you may be expose to dangerous voltage.
2. To clean the device always unplug the product from the wall outlet. Do not use liquid
cleaners or aerosol cleaners. Use a dry cloth for cleaning.
3. You will notice that the product has slots and openings. These are used for ventilation to
ensure reliable operation and to protect it from overheating. The openings should never be
blocked by other devices. This product should not be placed in an installation, unless proper
ventilation is provided. Do not put anything above the product because you will block the
ventilation openings causing the device to overheat.
4.The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
Service
Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
4
This Receiver has been manufactured to satisfy international safety standards. Please
read the following recommended safety
precautions carefully.
MAINS SUPPLY:
AC220-240V ~ 50/60Hz
OVERLOADING:
Do not overload wall outlets, extension cords or adapters as this can result
in fire or electrical shock.
LIQUIDS:
Keep liquids away from the Receiver.
CLEANING:
Before cleaning, disconnect the Receiver from the wall socket.
Use a cloth lightly dampened with water(no solvents) to clean the exterior.
VENTILATION:
Do not block the Receiver ventilation holes. Ensure that free airflow is
maintained around the Receiver.
Never store the Receiver where it is exposed to direct sunlight or near
heating euipment e.g. a radiator.
Never stack other electronic equipment on top of the Receiver.
Place the Receiver at least 30mm from the wall.
ATTACHMENTS:
Do not use any attachment that is not recommended by the manufacturer;
it may cause a hazard
or damage the equipment.
CONNECTION TO
THE CABLE TV
SIGNAL AND TV:
Connect all components before plugging any power cords into the wall
outlet. Always turn off the
Receiver, TV and other components before you connect or disconnect
any cables.
SERVICING:
Do not attempt to service this product yourself. Any attempt to do so will
make the warranty invalid.
Refer all servicing to a qualified service agent.
LIGHTNING:
If the Receiver is installed in an area subject to intense lightning activity,
protection devices for the
Receiver mains connector and modem telephone line are essential.
The individual manufacturer's instruction for safeguarding other
equipment, such as TV set,
Hi-Fi, etc., connected to the Receiver must also be followed during
lightning storms.
GROUNDING:
CATV cable MUST BE EARTHED.
The grounding system must comply with SABS 061.
NOTE:
Dispose the used batteries at designated place for environment protection
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
5
1. INTRODUCTION
1.1 Main Unit
1. USB
2. RF OUT
3. RF IN
4. Scart
5. Power Input
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
6
1.2 Remote control
1. NUMERIC ENTRY
2. MENU
3. CH+
4. VOL - /LEFT
5. OK
6. PAGE UP
7. CH-
8. TV/RADIO
9. INFO
10. AUDIO
11. SUB-T
12. PLAY
13. PAUSE
14. RED BUTTON/FB
15. GREEN BUTTON/FF
16. POWER
17. MUTE
18. RECALL
19. EXIT
20. VOL +/RIGHT
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
7
21. PAGE DN
22. FAV
23. EPG
24. TTX
25. RECORD
26. STOP
27. BLUE BUTTON/PVR
28. YELLOW BUTTON
1.3 Loading batteries to the remote control
1. Pull the battery compartment stock.
2. Load one button battery into the battery compartment.
3. Make sure that the battery have been inserted in the correct polarities matching to the
symbols +, - marked in the battery compartment. Close the battery compartment cover.
4. Remove the batteries if the unit will not be used for a prolonged period of time.
BE ENVIRONMENTALLY FRIENDLY
Do not dispose batteries as normal rubbish. Be environmentally friendly,
dispose batteries following the Government's regulation.
CAUTION
LITHIUM BATTERY
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
8
The remote control transmits a directional infrared beam. Be sure to aim the remote
control directly at the infrared sensor of the unit during operation.
If the sensor has been covered or there is a large object between the remote control and
the sensor, the sensor will not respond.
The sensor may not able to receive the remote signal when it is exposed to direct sunlight
or a strong artificial light (fluorescent or strobe light). In this case, change the direction of
the light or reposition the unit to avoid direct lighting.
1. Remote sensor
2. Within approximately 6 meter (20 feet)
2. SYSTEM CONNECTION
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
9
3. GETTING STARTED
3.1 Welcome Srceen
If you use ReDi 40 MP for the first time, the "Welcome" menu appears.
Press cursor button to setup the Region, Language, Display Mode and Aspect Mode.
Highlight "OK" and press the "OK" button to start channel search.
3.2 Installation
1. Press the "MENU" button to enter main menu.
2. Press "UP"or " DOWN " button to highlight "Installation", press "RIGHT" button to enter to
the Installation menu.
3. Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK" button to
enter the sub-menu .
4. Press "EXIT" button to exit.
3.2.1 Channel Auto Scan
1. Select the "Auto Scan", press "OK" button to enter the Auto Scan menu.
2. Press the cursor button to set "FTA Only", select NO for free to air and pay per view
channels and YES for all free to air channels only), then press "Search" and press the "OK"
button to start auto scan.
ReDi 40 MP User Manual
Korinthou 11, 14451 Metamorfosi Τel: 210-8098700, Fax: 210-6122512
Site: www.crypto.gr, Email: crypto@crypto.gr
10
3.2.2 Channel Scan
1. Select "Channel Scan", press the "OK" button to enter the Channel Scan menu.
2. Press cursor button to set Scan mode, Scan Band, Channel No., Frequency and Bandwidth,
then highlight "Search", press "OK" button to start channel scan .
Channel Scan mode:
-By channel
-By frequency
3.2.3 Aerial Adjustment
1. Select the "Tuner Power", press"OK" to enter the Aerial Adjustment.
2. Press the cursor button to set the desired setting. When "Tuner Power" is selected "On", the
STB will provide 5V power to the antenna. It will not provide anything when"Off" is
selected.
3.2.4 LCN
If LCN(Logical Channel Number) Select function is activated, you can't change the original
number of TV channels by scanning .
You can activat e/deactivate the LCN function by setting the "LCN Mode" to on/off.
Altri manuali per ReDi 40 MP
1
Indice
Altri manuali Crypto Ricevitore
