CTA ADD-FS2VDMB Manuale utente
VESA Compatible Dual Screen Floor Stand
w/ Storage Compartment (Black)
ADD-FS2VDMB
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
1. Assembling floor stand :
1A. Align holes from base plate (B) with the holes of the top (A)
and turn in screws (G) using the provided allen tool (J) until
securely tightened. As shown above.
2. Floor stand Cable routing :
3. Fixed setup (optional) :
3A. Align holes from base plate
(B) on the anchor (H) holes to get
a fix setup as shown above.
3B. If no need to fix on the floor
you can cover the anchor holes
with the provided fillers (L).
2A. Slide up and remove panel then insert cables through the
two metal separators and leave it at one of the sides at last
slide down panel to close as shown above.
x1
A
B
C
M5 Nut
x8
E
M5 x 12
x8
D
M5 Allen Key
x1
I
M6 x 16
x4
F
B
G
M6 Allen Key
J
x1
A
J
L
x2
Base
hole
filler
L
x2
x1
M
Keys
K
x4
M6 Washer
H
Anchors
x2
M6 x 18
x4
G
M6 x 18
x4
2A. Unlock back storage area using keys (N)
Anchors
x2
H
B
888-733-4448
5A. Align VESA holes of CTA’s enclosure with the
desk mount (A) VESA holes. With back storage
open using the included allen key tool (I), rotate
in screws (D) while holding hex nut (E) until
securely tightened.
5. How to attach a VESA compatible holder / enclosure :
**Enclosure is for illustration
purposes and not included
M
6. How to Cable Route and Accessing Back Storage Area :
6A. Unlock back storage area using keys (M). Fish through the holes your cable as shown into the back storage area. Fish through the holes
at the bottom to go into kiosk of behind the surface service areas to keep wires hidden. Place any small charging items, device or accessories
as needed as long as they fit into the space.
**Enclosures are for illustration
purposes and not included
4. Mounting desk mount to floorstand :
4A. Unlock back storage of desk mount (A)
area using keys (M).
4B. Align desk mount holes to floor stand holes and with the provided allen key tool (J) and rotate in
screws ontop of the washers (F, K) as shown.
M
A
I
M5 x 12
D
x4
x4
E
M5 Nut
A
(x4)
M6 Allen key
(x4)
F
M6 x 16
K
J
A
2A. Unlock back storage area using keys (N)
Indice
Altri manuali CTA Rack e supporto
CTA
CTA PAD-VPOS2BC Manuale utente
CTA
CTA LT-LFSDM Manuale utente
CTA
CTA PAD-SHFS Manuale utente
CTA
CTA PAD-DSGK Manuale utente
CTA
CTA PAD-PARAFDC Manuale utente
CTA
CTA PAD-MFSV Manuale utente
CTA
CTA ADD-PARAFS Manuale utente
CTA
CTA ADD-2VDMB Manuale utente
CTA
CTA PAD-CHKWM10 Manuale utente
CTA
CTA PAD-FTSU Manuale utente
CTA
CTA PAD-VPOS1W Manuale utente
CTA
CTA PAD-ASKB10 Manuale utente
CTA
CTA PAD-PARAFP Manuale utente
CTA
CTA PAD-HSKSBAE Manuale utente
CTA
CTA PAD-ASKP Manuale utente
CTA
CTA PAD-PARAFU Manuale utente
CTA
CTA ADD-PARAFSV Manuale utente
CTA
CTA PAD-PF1ICC Manuale utente
CTA
CTA PAD-PARAF1GT Manuale utente
CTA
CTA PAD-UGT Manuale utente
