CTA PAD-MSPC10 Series Manuale utente
Magnetic Splash-Proof Case
with Metal Mounting Plates and Table Stand
for iPAD 8th Gen 10.2”, iPad Air 4, iPad Pro 10.5” and More
888-733-4448
CONTENTS:
x1 x1
1. Peel the external
silicone sleeve from the
internal hard case.
2. To open internal hard case,
apply gentle pressure to the
small clips (as shown to the
left). The case will open with all
(4) sides are unclipped.
3. Insert tablet into the back
portion of the hard cover.
5. Place on the external
silicone rubber sleeve over the
hard case again.
1.Locate tablet case and insert device.
INSTRUCTIONS:
**Stand comes fully assembled
Take a PAD-MSPC10 series case and align PAD-MSPC10 series case
magnets to the (4) corners of the metal stand. Adjust omni-directionally
and tilt to your preference.
2.Placing magnetic tablet case on stand
4. Clip the front screen with the
back portion of the hardcover
around all the edges.
1 2 3
888-733-4448
How to fold out tablet kickstand:
1. Locate kickstand at case rear and fold out underneat strap
2. Display tablet at desired viewing angle
3. Push kickstand back into the original spot to return to handheld mode.
Altri manuali CTA Rack e supporto
CTA
CTA PAD-PARAPOSW Manuale utente
CTA
CTA ADD-CPOLEGN Manuale utente
CTA
CTA PAD-SSMANS Manuale utente
CTA
CTA PAD-UATPB2 Manuale utente
CTA
CTA PAD-WDM Manuale utente
CTA
CTA PAD-CHKWM10 Manuale utente
CTA
CTA PAD-ASKM6 Manuale utente
CTA
CTA PAD-SWM Manuale utente
CTA
CTA LT-LFSDM Manuale utente
CTA
CTA PAD-SCGS Manuale utente
CTA
CTA ADD-2VDMB Manuale utente
CTA
CTA PAD-UGT Manuale utente
CTA
CTA PAD-SCGS Manuale utente
CTA
CTA PAD-MFSV Manuale utente
CTA
CTA PAD-PARAFU Manuale utente
CTA
CTA PAD-PARAF1 Manuale utente
CTA
CTA AUT-VDMC Manuale utente
CTA
CTA PAD-2VDMB Manuale utente
CTA
CTA PAD-ASKP Manuale utente
CTA
CTA PAD-SHFS Manuale utente
