CYP CH-506TXPLRXPL Manuale utente
CH-506TXPLRXPL
HDMI to CAT5e/6 Extender
Operation Manual
Operation Manual
DRAFT MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 07/06/2012 Preliminary Release
CONTENTS
1. Introduction................................................. 1
2. Applications................................................ 1
3. Package Contents ..................................... 1
4. System Requirements................................. 1
5. Features....................................................... 2
6. Operation Controls and Functions............ 3
6.1 Transmitter Front and Rear Panels....... 3
6.2 Receiver Front and Rear Panels .......... 4
6.3 IR Pin Assignment .................................. 5
6.4 D-Sub 9 Pin Denitions .......................... 5
7. Specications ............................................. 6
8. Connection and Installation...................... 7
9. Acronyms .................................................... 8
1
1. INTRODUCTION
The HDMI over single CAT5e/6 with IR &RS-232 transmitter and receiver
wall-mounted set can make your home or ofce set-up more efcient
and easy to use. Uncompressed video and audio can be transmitted
up to 60 meters with the added benet of controls through the built-in
RS232 and IR ports. This family design of HDBaseT™ technology allows
a full usage of HDMI and controls over CAT5e/6 cable.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control for projector
• Classroom display and control
3. PACKAGE CONTENTS
• HDMI/DVI to CAT5e/6 with IR/RS232 x 1
• CAT5e/6 to HDMI with IR/RS232 x 1
• IR Blaster x 1 (HDMI only)
• IR Extender x 1 (HDMI only)
• 3.5Ø to RS-232 female cable x 1 (HDMI only)
• 3.5Ø to RS-232 male cable x 1 (HDMI only)
• 5V 2.6A DC Power Adaptor x 2
• Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI source equipment such as DVD/Blu-ray player/PC, output
display with HDMI input jack and connection cables of HDMI and
CAT5e/6.
2
5. FEATURES
• HDMI 1.4 with 3D, 4K x 2K support, HDCP and DVI compliant
• Complies with the HDBase T-Lite class
• Enables HDMI 1.4 (including HDCP), over a single CAT5e/6 up to
60m
• Full HD support: 1080p@60Hz@36 b/pixels, 3D over 60m and 4Kx2K
over 40m with CAT5e/6 cable
• HDMI input up to 15 meters with 8bits resolution or 10 meters with
12bits resolution
• HDMI output up to 15 meters with 8/12bits resolution
• Multiple control interfaces such as RS-232 with baud rate up to
115200/sec and IR
• Supports HDCP repeater and CEC bypass
• Supports uncompressed video 1080p, 60Hz, 36bits
• Audio supports LPCM 7.1CH, Dolby TrueHD, Dolby digital Plus and
DTS-HD Mater Audio transmission
• Compact size with stylish design
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Power
Link
CAT 5e /6 Out
DC 24V
1 4 5 6 7 82 3
IR2 Extender
RS-232 In IR1 Blaster
HDMI In
Transmitter
1DC 24V
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet.
2Power LED
3LINK LED
This LED will illuminate in blue when the devices are connected
with a CAT5e/6 cable. When the data transmission accrue with
error the LED will be blinking.
4CAT5e/6 OUT
Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals.
5RS232 IN
Plug the 3.5Ø to D-Sub 9 pin female cable included in the
package and connect to a PC or laptop for RS-232 commands
transmission.
6IR2 Extender
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
7IR1 Blaster
Plug the IR blaster included in the package for IR signal sending
from the receiver side.
8HDMI IN
Connect with source equipment such as DVD/Blu-ray player.
4
6.2 Receiver Front and Rear Panels
Power
Link
CAT 5e /6 In
IR1 Extender
RS-232 Out IR2 Blaster
HDMI Out
Receiver
31 2 4 5 6 7
1Power LED
2LINK LED
This LED will illuminate in blue when the devices are connected
with a CAT5e/6 cable. When the data transmission accrue with
error the LED will be blinking.
3CAT5e/6 IN
Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals.
4RS232 OUT
Plug the 3.5Ø to D-Sub 9 pin male cable included in the package
and connect to the device that is to be controlled by RS-232
commands
5IR2 Extender
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
6IR2 Blaster
Plug the IR blaster included in the package for IR signal sending
from the receiver side.
7HDMI OUT
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
5
6.3 IR Pin Assignment
3
1
3
1
2
2
Power 5 V
IR Blaster Signal
NC
IR Signal
Power 5 V
Grounding
IR Receiver
IR Blaster
6.4 D-Sub 9 Pin Denitions
Pin Dene TX / RX
1 N/C
2 TxD/RxD
3 RxD/TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C
9 NC
Indice
Altri manuali CYP Estensione
CYP
CYP CDVI-1109TXC Manuale utente
CYP
CYP PU-1103 Manuale utente
CYP
CYP CH-1109TXC Manuale utente
CYP
CYP PU-1106-KIT Manuale utente
CYP
CYP CH-506TX Manuale utente
CYP
CYP CH-1529TXPL Manuale utente
CYP
CYP CH-1529TX Manuale utente
CYP
CYP Suprex SPX-7400 Series Manuale utente
CYP
CYP CH-507TXWPUS Manuale utente
CYP
CYP CH-506TXPL Manuale utente
CYP
CYP CIR-03 Manuale utente
CYP
CYP CH-1109TX Manuale utente
CYP
CYP PU-507-KIT Manuale utente
CYP
CYP PUV-1620A-RX Manuale utente
CYP
CYP PU-IR01 Manuale utente
CYP
CYP PUV-1230PL-RX Manuale utente
CYP
CYP SDV-FTX Manuale utente
CYP
CYP CIR-03 Manuale utente
CYP
CYP CH-110TX Manuale utente
CYP
CYP PU-USBX Manuale utente
