CYP PU-305BD-RX Manuale utente

PU-305BD-RX

Bi-Directional Digital Audio over Single CAT Receiver

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 29/03/2018 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................6

6. Operation Controls and Functions.......7

6.1 Front Panel................................................... 7

6.2 Rear Panel..................................................... 8

6.3 RS-232 Pin Definition ............................... 8

7. Connection Diagram .............................9

8. Specifications...................................... 10

9. Acronyms............................................. 11

1. INTRODUCTION

The Optical (S/PDIF) IN/OUT with RS-232 Receiver can send or receive S/

PDIF audio signal synchronously over a single run of CAT5e/6 cable up to

300m. With RS-232 control and PoE feature added this Receiver can pair

with Transmitter unit together that support device control and one side

power supply.

2. APPLICATIONS

Home sound system extension

Conference and meeting room audio system sharing

Showroom audio extension

Airport announcement system

Public sound system installation

3. PACKAGE CONTENTS

Optical IN/OUT and RS-232 Receiver

12V Power Adaptor

Operation Manual

4. SYSTEM REQUIREMENTS

Input Transmitter with source equipment such as Blu-ray/DVD player and

output to active speakers or sound systems. Connect RS-232 to control

device for RS-232 command receiving.

5. FEATURES

Supports S/PDIF IN/OUT and RS-232 control

Supports Optical S/PDIF audio sampling rate up to 192 kHz

The S/PDIF with 192kHz sampling rate over a single CAT5e/6/7 cable

up to 100m/328ft, 96kHz sampling rate the cable up to 150m/492ft

and 48kHz sampling rate the cable up to 300m/984ft

Supports LPCM 2CH,Dolby Digital 2~5.1CH, DTS 2~5.1CH (Pass

through)

Support Bi-direction Power over Cable (PoC)

Bi-directional RS-232 control

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OPTICAL

OUT

RS-232

1 2 3

1OPTICAL IN

Connect to source equipment such as DVD/Blu-ray player, Set-Top Box

or game console for audio input signal routing.

2OPTICAL OUT

Connect to active speakers and or AV amplifiers with optical cable for

audio output.

3RS-232

Connect from PC/Laptop for RS-232 command sending to control the

device or with control device.

6.2 Rear Panel

AUDIO - CAT

DC 12V

POWER

1 2 3

1AUDIO-CAT

Connect the AUDIO-CAT input to the AUDIO-CAT output of the

Transmitter unit using CAT5e/6/7 cable.

2DC 12V

Connect the adaptor with power cord included in the package and

connect to AC wall outlet for power supply.

3POWER indicator

When power is ON, the LED will illuminate.

6.3 RS-232 Pin Definition

Pin Define TX/RX

1 N/C

2 TxD / RxD

3RxD / TxD

4 N/C

5 GND

6 N/C

7 N/C

8 N/C

9 N/C

7. CONNECTION DIAGRAM

OPTICAL

OUT

RS-232

OPTICAL

OUT

RS-232

AUDIO - CAT

DC 12V

POWER

AUDIO - CAT

DC 12V

POWER

DVD/Blu-ray Player

Amplifier

PC/NB

RS232 Control Device

8. SPECIFICATIONS

Input Port 1 x Optical

Output Port 1 x Optical

Control Port 1 x RS-232

Audio Sampling Rate Up to 192 kHz

Audio Format LPCM 2CH, Dolby Digital 2~5.1CH, and DTS

2~5.1CH (Pass through)

CAT Cable Distance 192k@100m/328ft

96k@150m/492ft

48k@300m/984ft

Input Level/Frequency

Output Level

THD+N

Frequency Response

SNR

Crosstalk

Power Supply 12V / 1.25A DC (US/EU standards, CE/FCC/UL

certified)

ESD Protection Human body model:

± 8kV (air-gap discharge)

± 6kV (contact discharge)

Dimensions (mm) 78.5(W) x 83.5(D) x 30(H) (W/Connector)

78.5(W) x 72(D) x 30(H) (W/O Connector)

Weight (g) N/A

Chassis Material Metal

Silkscreen Colour Black

Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption 0.85W

Indice

Altri manuali CYP Ricevitore

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente